Qian Lang

发表

Measurement of Radial Elasticity and Original Height of DNA Duplex Using Tapping-Mode Atomic Force Microscopy

Lianqing Liu, Haitao Chen, Longhai Li, 2019, Nanomaterials.

Viscoelastic and dynamic characteristics of wood-melamine-urea-formaldehyde composites prepared by in situ polymerization

Shengming Zhang, Chaowu Zhang, Haitao Chen, 2021, BioResources.

RAPID PREDICTIVE MODELS FOR MINIMALLY DESTRUCTIVE KAPPA NUMBER AND PULP YIELD OF ACACIA SPP. WITH NEAR INFRARED REFLECTANCE (NIR) SPECTROSCOPY

Jing Zhang, Junwen Pu, Qian Lang, 2012 .

Synthesis of Ag3PO4 nanospheres for significant photocatalytic activity under direct sunlight irradiation

Yiping Zhao, Lei Xu, Hao Liu, 2017 .

Preparation and characterization of waterborne polyurethane modified by nanocrystalline cellulose.

Y. She, Junwen Pu, Qian Lang, 2013 .

Particulate reinforcement and formaldehyde adsorption of modified nanocrystalline cellulose in urea-formaldehyde resin adhesive

Y. She, Junwen Pu, Qian Lang, 2013 .

Impregnation of poplar wood (Populus euramericana) with methylolurea and sodium silicate sol and induction of in-situ gel polymerization by heating

Xinwei Miao, Junwen Pu, Qian Lang, 2013 .

Study of Chemical Modification by Impregnation of Fresh Poplar Log and by Hot-Press Drying Process

Xue Zheng, Guofeng Wu, Junwen Pu, 2013 .

EFFECT OF CHEMICAL MODIFICATION AND HOT-PRESS DRYING ON POPLAR WOOD

Guofeng Wu, Y. Jiang, Junwen Pu, 2010 .

EFFECT OF THERMAL TREATMENT WITH METHYLOLUREA IMPREGNATED ON POPLAR WOOD

Guofeng Wu, Junwen Pu, Yilin Xu, 2012 .

Characterization of Ailanthus altissima Veneer Modified by Urea-formaldehyde Pre-polymer with Compression Drying

Xue Zheng, Xinwei Miao, Junwen Pu, 2014 .

PHYSICAL AND CHEMICAL PERFORMANCE OF EUCALYPTUS WOOD WITH IMPREGNATED CHEMICALS

Guofeng Wu, Junwen Pu, Qian Lang, 2012 .

Influence of Phenol–Formaldehyde Resin Oligomer Molecular Weight on the Strength Properties of Beech Wood

H. Militz, V. Biziks, Qian Lang, 2022, Forests.

Wood Modification Using a Urea-Formaldehyde Prepolymer

Junwen Pu, Qian Lang, Heyu Chen, 2013 .

The research of chemical modification on fast-growing wood

Junwen Pu, Qian Lang, Heyu Chen, 2012 .

Poplar wood–methylol urea composites prepared by in situ polymerization. II. Characterization of the mechanism of wood modification by methylol urea

Junwen Pu, Qian Lang, Z. Bi, 2015 .

Poplar wood‐methylolurea composites prepared by in situ polymerization

Y. She, Junwen Pu, Qian Lang, 2013 .

DRYING ON POPLAR WOOD

G. Wu, Y. Jiang, Junwen Pu, 2010 .

Chemical Modification of Fast-Grown Poplar by Urea Formaldehyde and Polyacrylic Resin

Junwen Pu, Qian Lang, Z. Bi, 2014 .

Chemical Modification of Poplar Wood on the Mechanical Properties

G. Wu, Y. Jiang, Junwen Pu, 2011 .

Fabrication and Characterization of Degradable Crop-Straw-Fiber Composite Film Using In Situ Polymerization with Melamine–Urea–Formaldehyde Prepolymer for Agricultural Film Mulching

C. Zhang, Shengming Zhang, Haitao Chen, 2022, Materials.

Characterization of hot-pressed poplar wood with chemical pretreatment

Junwen Pu, Yilin Xu, Qian Lang, 2012 .

The Effect of Degradation of Soda Lignin Using Pd/SO42−/ZrO2 as a Catalyst: Improved Reactivity and Antioxidant Activity

Shengming Zhang, Gui-zhen Fang, Haitao Chen, 2019, Polymers.

ect of Degradation of Soda Lignin Using Pd / SO 42 − / ZrO 2 as a Catalyst : Improved Reactivity and Antioxidant Activity

Shengming Zhang, Gui-zhen Fang, Haitao Chen, 2019 .

EFFECT OF UREA-FORMALDEHYDE PREPOLYMER ON FAST-GROWING WOOD

Junwen Pu, Qian Lang, Zheng-hua Xue, 2013 .