Hong-Tsu Young

发表

Factors Influencing Online Group Buying in Taiwan: An Empirical Study Based on the TPB Framework

Chih-Ching Hung, Nai-Chang Cheng, Shang-En Yu, 2018, WICON.

Allowing for End Cutting Edge Effects in Predicting Forces in Bar Turning with Oblique Machining Conditions

P. Mathew, Hong-Tsu Young, R S Hu, 1986 .

Online dressing of profile grinding wheels

Hong-Tsu Young, Der-Jen Chen, H. Young, 2006 .

Application of Project Management to Materials Selection for Diversified Product Design Parameters

Hong-Tsu Young, M.-Y. Kang, 2000 .

High-Speed Spindle Fault Diagnosis with the Empirical Mode Decomposition and Multiscale Entropy Method

Hong-Tsu Young, Nan-Kai Hsieh, Wei-Yen Lin, 2015, Entropy.

Modeling the influence function on a fused silica surface for CNC bonnet polishing process

Zong-Ru Yu, Cheng-Fang Ho, Hong-Tsu Young, 2020, OPTO.

Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning

P.L.B. Oxley, P. Mathew, Hong-Tsu Young, 1987 .

Investigation of Optimum Assembly Tolerance for a Machine Tool Spindle

Hong-Tsu Young, Nan Kai Hsieh, Wen Chin Chen, 2015 .

A Miniaturized Nickel Oxide Thermistor via Aerosol Jet Technology

Kuan-Ming Li, Hong-Tsu Young, Chia Wang, 2017, Sensors.

Anomaly Detection Neural Network with Dual Auto-Encoders GAN and Its Industrial Inspection Applications

Chien-Fang Ding, Hong-Tsu Young, Ta-Wei Tang, 2020, Sensors.

The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Wei-Yao Hsu, Zong-Ru Yu, Tsung-Yueh Tsai, 2017, Optical Engineering + Applications.

Development of automatic 3D profile measuring system

Hong-Tsu Young, Wei-Yen Lin, 2006, International Symposium on Precision Mechanical Measurements.

Quantitative reliability analysis of electronic packages in consideration of variability of model parameters

Wen-Fang Wu, Hong-Tsu Young, Yu-Yu Lin, 2005, 2005 7th Electronic Packaging Technology Conference.

The Analysis on Penetrating Efficiency in High-Energy Beam Drilling

Hong-Tsu Young, Je Ee Ho, H. Young, 2007 .

An Integrated Machining Approach for a Centrifugal Impeller

L.-C. Chuang, Hong-Tsu Young, 2003 .

Predicting cutting forces in face milling

P.L.B. Oxley, P. Mathew, Hong-Tsu Young, 1994 .

Integrated rough machining methodology for centrifugal impeller manufacturing

Hong-Tsu Young, Li-Chang Chuang, 2007 .

A method of comparing the speed of starlight and the speed of light from a terrestrial source

Cheng-Chieh Chang, San-Liang Lee, Hen-Wai Tsao, 2013, Optics & Photonics - Optical Engineering + Applications.

Approaches of Aviation Accident Investigation in Different Cultural Contexts from Human Factors Perspectives

Wen-Chin Li, David Harris, Hong-Tsu Young, 2009 .

Development of Diagnosis System for Machine Tool Shaft Inspection

Hong-Tsu Young, Nan Kai Hsieh, Wei Yen Lin, 2010 .

Project‐management of diversified product design parameters for concurrent engineering

Hong-Tsu Young, Ming‐Yuan Kang, 1999 .

Evaluation of Deep Learning Neural Networks for Surface Roughness Prediction Using Vibration Signal Analysis

Che-Lun Hung, Hong-Tsu Young, Wan-Ju Lin, 2019, Applied Sciences.

An Investigation of Alliance Portfolio Diversity Impact on Firm Performance

Chih-Ching Hung, Nai-Chang Cheng, Shang-En Yu, 2018, WICON.

The effect of optical system design for laser micro-hole drilling process

Chien-Fang Ding, Hong-Tsu Young, Yu-Lun Chien, 2017, Optical Engineering + Applications.

Special Optics Element Design in Enhancing Illumination Effects

Chia-Hung Yeh, Ching-Jui Shih, Hong-Tsu Young, 2014 .

3D Micro-Scale Profile Measuring System

Hong-Tsu Young, Wei Yen Lin, 2007 .

Novel Approach to Fabrication of 3D Micro-Structures by Laser Machining

Hong-Tsu Young, Fang Fei Lin, Shu Bin Hong, 2007 .

Technique in Chemical Mechanical Polishing Characterization of Dressing Behaviors and Optimization

Hong-Tsu Young, Kuen-Ren Chen, Kuen-Ren Chen, 2009 .

Using HET taxonomy to help stop human error

Neville A. Stanton, Wen-Chin Li, David Harris, 2010 .

An Intelligent Fault Diagnosis System for Machine Tools

Hong-Tsu Young, Wei-Yen Lin, Chia Wang, 2014 .

Robust Process Design towards through-Silicon via Quality Improvement Based on Grey-Taguchi Method

Hong-Tsu Young, Mike Yang, Chao Wei Tang, 2012 .

An analytical model of chatter vibration in metal cutting

Y. S. Tarng, Hong-Tsu Young, Bean Yin Lee, 1994 .

Human error prevention: using the human error template to analyze errors in a large transport aircraft for human factors considerations

Neville A. Stanton, Wen-Chin Li, David Harris, 2009 .

A five-axis rough machining approach for a centrifugal impeller

L.-C. Chuang, Hong-Tsu Young, K. Gerschwiler, 2004 .

Improving the dielectric breakdown field of silicon light-emitting-diode sub-mount by a hybrid nanosecond laser drilling strategy

Kuan-Ming Li, Hong-Tsu Young, Mike Yang, 2013, Microelectron. Reliab..

Measurement of the speed of light from extraterrestrial sources

San-Liang Lee, Hen-Wai Tsao, Shenq-Tsong Chang, 2015, SPIE Optical Engineering + Applications.

Thermal-Electrochemical Coupled Simulations for Cell-to-Cell Imbalances in Lithium-Iron-Phosphate Based Battery Packs

Hong-Tsu Young, Hsuan-Han Huang, Kuo-Chi Liao, 2017 .

Predicting the chip flow for nose radius tools under oblique machining conditions

P. Mathew, Hong-Tsu Young, Y. Liao, 1993 .

Investigation of silicon-based light emitting diode sub-mounts: Enhanced performance and potential for improved reliability

Kuan-Ming Li, Hong-Tsu Young, Shih-Chieh Tseng, 2015 .

Investigation of edge effect from the chip-back temperature using IR thermographic techniques

Hong-Tsu Young, T. L. Chou, 1995 .

Highly sensitive non-enzymatic electrochemical glucose biosensor using a photolithography fabricated micro/nano hybrid structured electrode

Hong-Tsu Young, Che-Wei Hsu, Gou-Jen Wang, 2016 .

Surface integrity of silicon wafers in ultra precision machining

Hong-Tsu Young, H. Young, H. T. Liao, 2006 .

Novel method to investigate the critical depth of cut of ground silicon wafer

Hong-Tsu Young, H. Young, Hsi-Tien Liao, 2007 .

Cutting temperature responses to flank wear

Hong-Tsu Young, H. Young, 1996 .