Garret E. O’Donnell

发表

Initial results from processing of acoustic emission signals from small diameter drilling

D. Lynch, Garret E. O’Donnell, 2009 .

Industrial steam systems: Strategic framework with proxy measurements to evaluate the total cost of steam

Garret E. O’Donnell, Dominik Seiler, Dan Donovan, 2019 .

Reducing Uncertainty in PHM by Accounting for Human Factors - A Case Study in the Biopharmaceutical Industry

Piero Baraldi, Nora Balfe, Garret E. O’Donnell, 2015 .

Decision Making under Uncertainty in Tool Condition Monitoring

Garret E. O’Donnell, Kevin Kelly, 2007 .

The Characterisation of Energy Consumption in Manufacturing Facilities – A Hierarchical Approach

Garret E. O’Donnell, Eoin O’Driscoll, Donal Óg Cusack, 2013 .

Multi-sensor process analysis and performance characterisation in CNC turning—a cyber physical system approach

Jeff Morgan, Garret E. O’Donnell, G. O'Donnell, 2017, The International Journal of Advanced Manufacturing Technology.

Industrial Compressed Air Use: Two Case Studies

Garret E. O’Donnell, Petr Eret, Colin Harris, 2010 .

Predicting the unpredictable: Consideration of human and organisational factors in maintenance prognostics

Nora Balfe, Garret E. O’Donnell, Darren McDonnell, 2018, Journal of Loss Prevention in the Process Industries.

Advanced monitoring of machining operations

Krzysztof Jemielniak, David Dornfeld, Garret E. O’Donnell, 2010 .

A practical approach to investigating energy consumption of industrial compressed air systems

Garret E. O’Donnell, Petr Eret, Colin Harris, 2012 .

Energy optimisation of pneumatic actuator systems in manufacturing

Sean Nolan, Garret E. O’Donnell, Paul Harris, 2014 .

Force generation during friction stir welding of AA2024-T3

Garret E. O’Donnell, D. Trimble, J. Monaghan, 2012 .

The development of energy performance indicators within a complex manufacturing facility

Garret E. O’Donnell, Eoin O’Driscoll, Donal Óg Cusack, 2013 .

Characterising the Energy Consumption of Machine Tool Actuator Components Using Pattern Recognition

Kevin Kelly, Garret E. O’Donnell, Eoin O’Driscoll, 2013 .

Optimising Compressed Air System Energy Efficiency - The Role of Flow Metering and Exergy Analysis

Sean Nolan, Garret E. O’Donnell, Paul Harris, 2013 .

Implementation of Energy Metering Systems in Complex Manufacturing Facilities–A Case Study in a Biomedical Facility

Garret E. O’Donnell, Eoin O’Driscoll, D. Og Cusack, 2012 .

Open Design and the Reprap Project

Garret E. O’Donnell, Gareth J. Bennett, G. Bennett, 2010 .

High Performance Cutting (HPC) in the New Era of Digital Manufacturing – A Roadmap

Brigid Mullany, Gerry Byrne, Eamonn Ahearne, 2016 .

Position-oriented process monitoring in freeform abrasive machining

Garret E. O’Donnell, Emma Brazel, Raymond Hanley, 2013 .

Filling the gap: Comparison of proxy measurement techniques for small data scenarios

Garret E. O’Donnell, Dominik Seiler, G. O'Donnell, 2020 .

The energy saving opportunity in targeting non-value added manufacturing activities – a structured approach

Garret E. O’Donnell, N. Aughney, 2015 .

Intelligent energy based status identification as a platform for improvement of machine tool efficiency and effectiveness

Garret E. O’Donnell, Kevin Kelly, Eoin O’Driscoll, 2015 .

Modelling and identification of industrial pneumatic drive system

Garret E. O’Donnell, Tom Whelan, Paul G. Harris, 2012 .

Industrial power and energy metering – a state-of-the-art review

Garret E. O’Donnell, Eoin O’Driscoll, G. O'Donnell, 2013 .

The Cyber Physical Implementation of Cloud Manufactuirng Monitoring Systems

Jeff Morgan, Garret E. O’Donnell, 2015 .

FPGA based Monitoring Platform for Condition Monitoring in Cylindrical Grinding

Garret E. O’Donnell, Ivor Humphreys, Gerrit Eisenblätter, 2014 .

Dynamic Response Analysis of Passive Wireless Surface Acoustic Wave (SAW) Strain Sensors Used for Force Measurement in Turning

Garret E. O’Donnell, Dermot Geraghty, Rory Stoney, 2013 .

Implementing energy efficiency in manufacturing – overcoming risk

Garret E. O’Donnell, Niall Aughney, 2013 .

The effect of wheel eccentricity and run-out on grinding forces, waviness, wheel wear and chatter

Garret E. O’Donnell, Stuart Murphy, Jeffrey Badger, 2011 .

Model-Based Predictive Consumption of Compressed Air for Electro-Pneumatic Systems

Garret E. O’Donnell, Tom Whelan, Paul Harris, 2010 .

Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions

Garret E. O’Donnell, Paul Harris, Tom Whelan, 2012 .

Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review

Garret E. O’Donnell, Darren McDonnell, Rocco Lupoi, 2018 .

Characterising the machining of biomedical grade polymers

Garret E. O’Donnell, Ray Hanley, Barry Aldwell, 2014 .

Towards the improvement of tool condition monitoring systems in the manufacturing environment

Gerry Byrne, Garret E. O’Donnell, P. Young, 2001 .

On the Relationship between Cutting Temperature and Workpiece Polymer Degradation During CFRP Edge Trimming

Garret E. O’Donnell, Kevin Kerrigan, K. Kerrigan, 2016 .

An Integrated Telemetric Thermocouple Sensor for Process Monitoring of CFRP Milling Operations

Garret E. O’Donnell, R. Hewison, Kevin Kerrigan, 2012 .

Acoustic emission in dressing of grinding wheels: AE intensity, dressing energy, and quantification of dressing sharpness and increase in diamond wear-flat size

Garret E. O’Donnell, Stuart Murphy, Jeffrey Badger, 2018 .