Lin Sun

发表

Influence of sulfurization pressure on Cu2ZnSnS4 thin films and solar cells prepared by sulfurization of metallic precursors

J. Chu, Pingxiong Yang, Jun He, 2015 .

Cu2ZnSnS4 thin film solar cell utilizing rapid thermal process of precursors sputtered from a quaternary target: a promising application in industrial processes

J. Chu, Pingxiong Yang, Jun He, 2014 .

Effect of post-sulfurization on the composition, structure and optical properties of Cu2ZnSnS4 thin films deposited by sputtering from a single quaternary target

J. Chu, Pingxiong Yang, Jun He, 2013 .

Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: An experimental study

J. Chu, Pingxiong Yang, Jun He, 2012 .

Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by Pulsed Laser Deposition method

J. Chu, Pingxiong Yang, Jun He, 2011 .

Study on the preheating duration of Cu2SnS3 thin films using RF magnetron sputtering technique for photovoltaics

J. Chu, Pingxiong Yang, Jun He, 2016 .

Influence of rare-earth elements doping on structure and optical properties of BiFeO3 thin films fabricated by pulsed laser deposition

J. Chu, Pingxiong Yang, J. Tao, 2014 .

Influence of Ni doping on phase transformation and optical properties of TiO2 films deposited on quartz substrates by sol–gel process

J. Chu, J. Tian, Pingxiong Yang, 2012 .

Effects of Co doping on the phase transformation and optical properties of TiO2 thin films by sol–gel method

J. Chu, J. Tian, Pingxiong Yang, 2011 .

Improvement of grain growth and composition distribution of Cu2ZnSn(S,Se)4 by using chloride-based precursor solution

J. Chu, Pingxiong Yang, Ye Chen, 2021 .

Heterojunction post-heat treatment process driving high efficiency for Cu2ZnSnS4 solar cell

Pingxiong Yang, Ye Chen, Lin Sun, 2021 .

Compositional dependence of structural and electronic properties of Cu(2)ZnSn(S,Se)(4) alloys for thin film solar cells

A. Walsh, X. Gong, Ping Yang, 2011 .

Grain growth enhancing through preheating treatment of a sputtered stacked metallic precursor for Cu(In, Al)Se2 thin film solar cells application

J. Chu, Pingxiong Yang, J. Tao, 2019, Materials Science and Engineering: B.

Antimony-induced grain growth and properties modification of Cu(In, Al)Se2 thin films fabricated by selenization of sputtered stacked precursors

J. Chu, Pingxiong Yang, J. Tao, 2016 .

Structural, optical and electrical properties of Cu2FeSnSe4 and Cu(In,Al)Se2 thin films

J. Chu, Pingxiong Yang, Jun Zhang, 2015 .

Microstructural and morphological properties of sputtered Cu(In, Al)Se2 thin films for solar cell applications

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Synthesis and characterization of earth-abundant Cu2MnSnS4 thin films using a non-toxic solution-based technique

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Composition control in Cu2ZnSnS4 thin films by a sol–gel technique without sulfurization

J. Chu, Pingxiong Yang, J. Tao, 2014, Journal of Materials Science: Materials in Electronics.

MoO2 Sacrificial Layer for Optimizing Back Contact Interface of Cu2ZnSn(S,Se)4 Solar Cells

J. Chu, Rong Huang, R. Qi, 2020, IEEE Journal of Photovoltaics.

Compositional dependence of photovoltaic properties of Cu2ZnSnSe4 thin film solar cell: Experiment and simulation

J. Chu, Pingxiong Yang, Jun He, 2018 .

Above 10% efficient electrodeposited Cu2ZnSn(S,Se)4 solar cell achieved by modifying precursor

Pingxiong Yang, Ye Chen, Lin Sun, 2022, Solar Energy Materials and Solar Cells.

A sputtered CdS buffer layer for co-electrodeposited Cu2ZnSnS4 solar cells with 6.6% efficiency.

J. Chu, Pingxiong Yang, J. Tao, 2015, Chemical communications.

Comparative study on Cu2ZnSnS4 thin films deposited by sputtering and pulsed laser deposition from a single quaternary sulfide target

J. Chu, Pingxiong Yang, Jun He, 2012 .

Cation substitution induced structural transition, band gap engineering and grain growth of Cu2CdxZn1−xSnS4 thin films

J. Chu, Pingxiong Yang, J. Tao, 2017 .

Strategic improvement of Cu2SnS3 thin film by different heating rates and photoluminescence investigation

P. Xiang, J. Chu, Pingxiong Yang, 2018, Materials Science in Semiconductor Processing.

Effect of sulfurization temperature on properties of Cu2SnS3 thin films and solar cells prepared by sulfurization of stacked metallic precursors

J. Chu, Pingxiong Yang, Jun He, 2015 .

Synthesis and optimized sulfurization time of Cu2SnS3 thin films obtained from stacked metallic precursors for solar cell application

J. Chu, Pingxiong Yang, Jun He, 2015 .

Synthesis of Cu2ZnGeS4 thin film via sulfurization of RF magnetron sputtered precursor

J. Chu, Pingxiong Yang, Jun He, 2015, Journal of Materials Science: Materials in Electronics.

Origin of Band-Tail and Deep-Donor States in Cu2ZnSnS4 Solar Cells and their Suppression through Sn-Poor Composition.

J. Tomm, J. Chu, Shiyou Chen, 2019, The journal of physical chemistry letters.

Microstructural and morphological properties of spin-coated Cu2MnSn(S,Se)4 thin films for solar cell applications

J. Chu, Pingxiong Yang, J. Tao, 2017 .

Comparative study of the structural and optical properties of Cu2SnX3 and Cu2ZnSnX4 (X = S, Se) thin films and optoelectronic devices

J. Chu, Pingxiong Yang, Lin Sun, 2016 .

Influence of annealing temperature on structural and optical properties of Cu2MnSnS4 thin films fabricated by sol–gel technique

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Composition dependence of the structure and optical properties of Cu2MnxZn1−xSnS4 thin films

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Improvement performance of two-step electrodepositing Cu 2 MnSnS 4 thin film solar cells by tuning Cu-Sn alloy layer deposition time

J. Chu, Pingxiong Yang, J. Tao, 2018, Materials Chemistry and Physics.

Effect of deposition potential on the properties of Cu2ZnSnS4 films for solar cell applications

J. Chu, Pingxiong Yang, J. Tao, 2014 .

Processing optimization and sintering time dependent magnetic and optical behaviors of Aurivillius Bi5Ti3FeO15 ceramics

J. Chu, C. Duan, W. Bai, 2013 .

Small polaron migration associated multiple dielectric responses of multiferroic DyMnO3 polycrystal in low temperature region

D. Remiens, X. Meng, J. Chu, 2012 .

Direct Observation on p- to n-Type Transformation of Perovskite Surface Region during Defect Passivation Driving High Photovoltaic Efficiency

Jianhua Xu, Xianjie Liu, M. Fahlman, 2021 .

Effect of the post-selenization time on the structural and optical properties of Cu2MnSn(S,Se)4 thin films synthesized by sol-gel technique

J. Chu, J. Tao, H. Deng, 2017 .

Influence of selenium growth condition on the photovoltaic conversion efficiency of Sb2Se3 as the solar cell absorption layer

F. Yue, Lin Sun, Shangwei Dong, 2022, Journal of Materials Science: Materials in Electronics.

Modulation of Ferroelectric and Optical Properties of La/Co-Doped KNbO3 Ceramics

R. Qi, C. Jing, F. Yue, 2021, Nanomaterials.

Bandgap narrowing and ferroic modulation in KNbO3 ceramics composited by spinel AFe2O4 (A = Mg, Zn, Ni, Co)

P. Xiang, R. Qi, Hui-Qi Peng, 2022, Journal of Alloys and Compounds.

Band gap modulation and improved magnetism of double perovskite Sr2KMoO6 (K = Fe, Co, Ni, Mn) doped BaTiO3 ceramics

J. Chu, J. Tao, H. Deng, 2021, Ceramics International.

Electric-field modulated photovoltaic effect of ferroelectric double-perovskite Bi2FeMnO6 films

C. Duan, F. Yue, Ye Chen, 2021, Applied Physics Letters.

Synthesis of Cu2MnSnS4 thin film deposited on seeded fluorine doped tin oxide substrate via a green and low-cost electrodeposition method

J. Chu, J. Tao, H. Deng, 2017 .

Coexistence of spin glass and ferroelectricity in highly ordered Bi2FeMnO6 epitaxial thin film

P. Xiang, J. Chu, Rong Huang, 2015, 1512.06360.

Influence of substitution of Nd3+ for Bi3+ on structure and piezoelectric properties of SrBi2−χNdχNb2O9 (χ=0, 0.1, 0.2 and 0.4)

Chude Feng, J. Chu, Yawei Li, 2009 .

Electric control of magnetic properties in epitaxially grown FeRh/MgO/PMN-PT heterostructures

Yong Peng, Zhenchong Li, Q. Zhan, 2021, Journal of Alloys and Compounds.

Electronic phase diagram of oxygen-deficient SmNiO3−δ epitaxial thin films

P. Xiang, N. Zhong, C. Duan, 2017 .

Lattice vibrations and dielectric functions of ferroelectric SrBi2−xNdxNb2O9 bismuth layer-structured ceramics determined by infrared reflectance spectra

Zhigao Hu, Wenwu Li, J. Chu, 2010 .

Doping effect on the phase transition temperature in ferroelectric SrBi2−xNdxNb2O9 layer-structured ceramics: a micro-Raman scattering study

J. Chu, K. Jiang, Zhigao Hu, 2012 .

The preparation, and structural and multiferroic properties of B-site ordered double-perovskite Bi2FeMnO6

P. Xiang, J. Chu, Rong Huang, 2017 .

Effect of sulfurization temperature of solution-processed Cu2SnS3 absorber for low cost photovoltaic cells

J. Chu, J. Tao, H. Deng, 2018, Materials letters (General ed.).

Effect of working pressure on growth of Cu(In,Ga)Se2 thin film deposited by sputtering from a single quaternary target

Li-ping Zhu, J. Chu, Jun He, 2014 .

Investigate the growth mechanism of Cu2FeSnS4 thin films by sulfurization of metallic precursor

J. Chu, H. Deng, Qiao Zhang, 2017 .

Synthesis and characterization of Cu2ZnSnS4 thin films by the sulfurization of co-electrodeposited Cu–Zn–Sn–S precursor layers for solar cell applications

J. Chu, J. Tao, Jun He, 2014 .

Influence of Se supply for selenization of Cu(In,Ga)Se2 precursors deposited by sputtering from a single quaternary target

Li-ping Zhu, J. Chu, J. Tao, 2014 .

Investigation of Cu2ZnSnS4 thin films with controllable Cu composition and its influence on photovoltaic properties for solar cells

P. Xiang, J. Chu, F. Yue, 2017 .

The characterization of CuInSe2 thin films by a sequential processes of sputtering and selenization

Junhao Chu, Lin Sun, Pingxiong Yang, 2013, Other Conferences.

Influence of different S/Se ratio on the properties of Cu2Sn(SxSe1-x)3 thin films fabricated by annealing stacked metal precursors

J. Chu, J. Tao, Jun He, 2015, Journal of Materials Science: Materials in Electronics.

Realization of 11.5% Efficiency Cu2ZnSn(S,Se)4 Thin‐Film Solar Cells by Manipulating the Phase Structure of Precursor Films

Hui-Qi Peng, Ye Chen, Lin Sun, 2021, Solar RRL.

Modification of Back Contact in Cu2ZnSnS4 Solar Cell by Inserting Al-Doped ZnO Intermediate Layer.

J. Chu, Ye Chen, Lin Sun, 2020, ACS applied materials & interfaces.

The role of sulfurization temperature on the morphological, structural and optical properties of electroplated Cu2MnSnS4 absorbers for photovoltaics

J. Chu, J. Tao, H. Deng, 2018, Materials Letters.

Synthesis and characterization of Cu-based selenide photovoltaic materials: Cu2FeSnSe4 and Cu(In, Al)Se2

J. Chu, J. Tao, F. Yue, 2015 .

Preparation and characterization of Bi-doped LuFeO3 thin films grown on LaNiO3 substrate

Li-ping Zhu, J. Chu, A. Jiang, 2014 .

Effects of sputtering parameters on photoelectric properties of AZO film for CZTS solar cell

Bo Li, J. Chu, Chuanhe Ma, 2019, Journal of Alloys and Compounds.

Effects of bismuth-doping on the properties of Cu(In, Al)Se2 thin films prepared by selenization of sputtered stacked precursors

J. Chu, J. Tao, H. Deng, 2018 .

Temperature dependence of phonon modes, dielectric functions, and interband electronic transitions in Cu2ZnSnS4 semiconductor films.

Jinzhong Zhang, J. Chu, K. Jiang, 2012, Physical chemistry chemical physics : PCCP.

Effects of pre-alloying process on the absorber quality for Cu2ZnSnS4 thin-film solar cells

Ye Chen, Lin Sun, Jianjun Lin, 2023, Materials Science in Semiconductor Processing.

Temperature and excitation dependence of stimulated emission and spontaneous emission in InGaN epilayer

Bo Li, Xinhe Zheng, Cuiling Zhang, 2019, Chinese Physics B.

Influence of transition elements doping on structural, optical and magnetic properties of BiFeO3 films fabricated by magnetron sputtering

Junhao Chu, Pingxiong Yang, Jun He, 2013 .

Cu content dependence of morphological, structural and optical properties for Cu2ZnGeS4 thin films synthesized by sulfurization of sputtered precursors

Junhao Chu, Pingxiong Yang, Ling Huang, 2015 .

A sputtered CdS buffer layer for co-electrodeposited Cu2ZnSnS4 solar cells with 6.6% efficiency.

J. Chu, J. Tao, Kezhi Zhang, 2015, Chemical communications.