Y. Hwang

发表

Design of exponential stabilizing controller for open-loop unstable bilinear systems

Y. Hwang, 2004, IEEE International Conference on Networking, Sensing and Control, 2004.

Exponential Stabilization of Bilinear Systems With Open‐Loop Unstable Dynamics

Y. Hwang, 2002 .

Cutting errors analysis for spindle-tilting type 5-axis NC machines

Yean-Ren Hwang, Cha-Shong Liang, Y. Hwang, 1998 .

A new decision algorithm of maximum allowable step length for five‐axis table‐tilting type machining

Y. Hwang, Ming-Che Ho, 2002 .

Milling Process Monitoring Based on Vibration Analysis Using Hilbert-Huang Transform

Chia-Hung Liu, Ryutaro Tanaka, Katsuhiko Sekiya, 2018, Int. J. Autom. Technol..

Preparation of Co-Fe-Ni alloy micropillar by microanode-guided electroplating

Jing-Chie Lin, Shou-Yi Chang, K. Peng, 2021 .

Effect of [Zn2+]/[Cu2+] ratio of the bath on the composition and property of Cu–Zn alloy micropillars prepared using microanode-guided electroplating

Jing-Chie Lin, Y. Hwang, Yao-Tien Tseng, 2021 .

Fabrication of Cu-Zn Alloy Micropillars by Potentiostatic Localized Electrochemical Deposition

Jing-Chie Lin, Y. Hwang, Yung-Chieh Chang, 2019, Journal of The Electrochemical Society.

Fabrication of 3D Microstructure by Localized Electrochemical Deposition with Image Feedback Distance Control and Five-Axis Motion Platform

Jing-Chie Lin, Y. Hwang, Yao-Tien Tseng, 2016 .

Fabrication of Two-Dimensional Microstructures by Using Micro-Anode-Guided Electroplating with Real-Time Image Processing

Jing-Chie Lin, Y. Hwang, J. Lin, 2014 .

Continuity Microplating using Image Processing

Ting Chen, Y. Hwang, Jinghua Lin, 2013 .

Theoretical Modeling and Fabrication of Two-Dimensional Microstructures by Using Micro-Anode-Guided Electroplating with Real-Time Image Processing

Y. Hwang, J. Lin, Yong-Jie Ciou, 2015 .

An image-guided mobile robotic welding system for SMAW repair processes

Ming-Chang Wu, Pi-Cheng Tung, Yean-Ren Hwang, 2004 .

The development of a mobile manipulator imaging system for bridge crack inspection

Pi-Cheng Tung, Yean-Ren Hwang, Ming-Chang Wu, 2002 .

Exponentially stabilizing division controllers for dyadic bilinear systems

Min-Shin Chen, Yean-Ren Hwang, Yu-Jeng Kuo, 2003, IEEE Trans. Autom. Control..

Five-axis tool orientation smoothing using quaternion interpolation algorithm

Yean-Ren Hwang, Ming-Che Ho, Chang-Hsia Hu, 2003 .

Fabrication of a novel microsensor consisting of electrodeposited ZnO nanorod-coated crossed Cu micropillars and the effects of nanorod coating morphology on the gas sensing.

Jing-Chie Lin, Y. Hwang, Yao-Tien Tseng, 2014, ACS applied materials & interfaces.

Application of cepstrum and neural network to bearing fault detection

Yean-Ren Hwang, Kuo-Kuang Jen, Yu-Ta Shen, 2009 .

Three-Dimensional Amorphous Ni–Cr Alloy Printing by Electrochemical Additive Manufacturing

Jing-Chie Lin, Y. Hwang, P. Tsai, 2020 .

Tool Trajectory Error for Table-tilting Machines

Yean-Ren Hwang, Ming-Che Ho, Y. Hwang, 2002 .

Cutting Error Analysis for Table-Tilting Type Four-Axis NC Machines

Yean-Ren Hwang, Y. Hwang, 2000 .

Estimation of Maximum Allowable Step Length for Five-Axis Cylindrical Machining

Yean-Ren Hwang, Min-Tse Ho, Y. Hwang, 2000 .

A cutter tool monitoring in machining process using Hilbert–Huang transform

Yean-Ren Hwang, Tomas Kalvoda, Y. Hwang, 2010 .

Dynamic analysis and fuzzy logic control for the vane-type air motor

Min-Shin Chen, Yean-Ren Hwang, Yu-Ta Shen, 2009 .

Fuzzy smoothing algorithms for variable structure systems

Masayoshi Tomizuka, Yean-Ren Hwang, M. Tomizuka, 1994, IEEE Trans. Fuzzy Syst..

A state-dependent boundary layer design for sliding mode control

Masayoshi Tomizuka, Min-Shin Chen, Yean-Ren Hwang, 2002, IEEE Trans. Autom. Control..

Backstepping sliding mode tracking control of a vane-type air motor X-Y table motion system.

Yean-Ren Hwang, Chia-Hua Lu, Yu-Ta Shen, 2011, ISA transactions.

Backstepping Sliding-Mode Control for a Pneumatic Control System

C-H Lu, Y-R Hwang, Y-T Shen, 2010 .

ECG Feature Extraction and Classification Using Cepstrum and Neural Networks

Yean-Ren Hwang, Kuo-Kuang Jen, Kuo-Kuang Jen, 2008 .

Hybrid sliding mode position control for a piston air motor ball screw table.

Yean-Ren Hwang, Chia-Hua Lu, Y. Hwang, 2012, ISA transactions.

Mass Transfer Within the Location Where Micro Electroplating Takes Place

Jing-Chie Lin, Tingru Chang, Y. Hwang, 2011 .

Machine codes modification algorithm for five-axis machining

Yean-Ren Hwang, Ming-Che Ho, Y. Hwang, 2003 .

Application of Hilbert–Huang transform for vibration signal analysis in end-milling

Ryutaro Tanaka, Katsuhiko Sekiya, Keiji Yamada, 2018, Precision Engineering.

Comparison of FFT and marginal spectra of EEG using empirical mode decomposition to monitor anesthesia

Yi-Chun Chen, Yean-Ren Hwang, Shou-Zen Fan, 2016, Comput. Methods Programs Biomed..

A model reference robust multiple-surfaces design for tracking control of radial pneumatic motion systems

Yean-Ren Hwang, Chia-Hua Lu, Y. Hwang, 2012 .

System Identification and Integration Design of an Air/Electric Motor

Shih-Yao Huang, Yean-Ren Hwang, Y. Hwang, 2013 .

A hybridization design of an air motor and an electric motor based on field programmable gate array controller

Shih-Yao Huang, Yean-Ren Hwang, Y. Hwang, 2012 .

Field-programmable gate array controller design for air-powered motorcycle

Y-R Hwang, S-Y Huang, Y. Hwang, 2011 .

Characteristics Measurement and FPGA Controller Design for an Air Motor and Electric Motor Hybrid Power System

Shih-Yao Huang, Yean-Ren Hwang, Y. Hwang, 2011 .