C. Meredith

发表

Density, Microstructure, and Strain-Rate Effects on the Compressive Response of Polyurethane Foams

S. Satapathy, J. Hogan, S. Ouellet, 2021, Experimental Mechanics.

Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP)

Akhtar S. Khan, C. Meredith, A. Khan, 2010 .

CHLORINATION OF METHANE WITH COPPER CHLORIDE MELTS. TERNARY SYSTEM, CuCl–CuCl2–KCl, AND ITS EQUILIBRIUM CHLORINE PRESSURES

E. Gorin, C. M. Fontana, G. A. Kidder, 1952 .

Texture evolution and anisotropy in the thermo-mechanical response of UFG Ti processed via equal channel angular pressing

Akhtar S. Khan, C. Meredith, A. Khan, 2012 .

Quasi-static and dynamic investigation of an advanced high strength and corrosion resistant 10 % Cr nanocomposite martensitic steel.

C. Meredith, A. Khan, Saadi A. Habib, 2021, International journal of mechanical sciences.

Mechanical behavior of ultrafine-grained/nanocrystalline titanium synthesized by mechanical milling plus consolidation: Experiments, modeling and simulation

Jian Liu, L. Takács, C. Meredith, 2015 .

The quasi-static and dynamic response of fine-grained Mg alloy AMX602: An experimental and computational study

T. Sano, J. Lloyd, C. Meredith, 2016 .

Dynamic thermomechanical behavior of fine-grained Mg alloy AMX602

C. Meredith, 2021 .

Dynamic Compression Strength of Ceramics: What was Learned from an Interlaboratory Round Robin Exercise?

R. Rhorer, H. Liao, G. Quinn, 2020, Journal of Dynamic Behavior of Materials.

Static and dynamic compression strength of hot-pressed boron carbide using a dumbbell-shaped specimen

J. Swab, D. Casem, C. Meredith, 2017, Journal of Materials Science.

The microstructural evolution and thermo-mechanical behavior of UFG Ti processed via equal channel angular pressing

C. Meredith, A. Khan, 2015 .

Temperature and Stress Dependent Twinning Behavior in a Fully Austenitic Medium-Mn Steel

J. Lloyd, D. Magagnosc, K. An, 2022, Acta Materialia.

Superior strength and ductility in a low density duplex steel studied by in situ neutron diffraction

J. Lloyd, D. Magagnosc, C. Meredith, 2021 .

Texture Evolution of a Fine-Grained Mg Alloy at Dynamic Strain Rates

J. Lloyd, C. Meredith, 2017 .

Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling

J. Lloyd, S. Schoenfeld, C. Meredith, 2019, International Journal of Plasticity.

CHLORINATION OF METHANE WITH COPPER CHLORIDE MELTS. KINETICS OF OXYGEN ABSORPTION BY THE MELT

E. Gorin, C. M. Fontana, C. Meredith, 1952 .

Density, strain rate and strain effects on mechanical property evolution in polymeric foams

J. Hogan, S. Ouellet, D. Romanyk, 2021, International Journal of Impact Engineering.

Incipient dynamic recrystallization and adiabatic shear bands in Ti–7Al studied via in situ X-ray diffraction

J. Lloyd, B. Schuster, D. Magagnosc, 2021 .

Miniature Beryllium Split-Hopkinson Pressure Bars for Extending the Range of Achievable Strain-Rates

D. Casem, C. Bolme, K. Ramos, 2022, Metals.

The Effect of Strain Gage Instrumentation Bandwidth when Decreasing Loading Times of a Brittle Material with a Mini-Kolsky Bar

C. Meredith, 2022, Experimental Techniques.

Density, Microstructure, and Strain-Rate Effects on the Compressive Response of Polyurethane Foams

S. Ouellet, D. Romanyk, J. D. Hogan, 2021, Experimental Mechanics.

Mechanical Behavior and Deformation Mechanisms of Mg-based Alloys in Shear Using In-Situ Synchrotron Radiation X-Ray Diffraction

M. L. Young, C. Meredith, Z. Herl, 2018, Dynamic Behavior of Materials, Volume 1.