J. Mulders

发表

Validation of a numerical model of skeletal muscle compression with MR tagging: a contribution to pressure ulcer research.

F P T Baaijens, C W J Oomens, C. Oomens, 2008, Journal of biomechanical engineering.

Improving the conductivity of platinum-containing nano-structures created by electron-beam-induced deposition

M. Hesselberth, J. Mulders, Aurelien P J M Botman, 2008 .

Gold complexes for focused-electron-beam-induced deposition.

J. D. De Hosson, S. Harder, W. V. van Dorp, 2014, Langmuir : the ACS journal of surfaces and colloids.

Embedded purification for electron beam induced Pt deposition using MeCpPtMe3

F. Casanova, J. Mulders, E. Villamor, 2015, Nanotechnology.

Three-Dimensional Texture Analysis

A. Day, J. Mulders, 2005 .

Characterization of a new cobalt precursor for focused beam deposition of magnetic nanostructures

G. Gazzadi, M. Affronte, S. Frabboni, 2011 .

Purification of platinum and gold structures after electron-beam-induced deposition

R. Weemaes, S. Mentink, J. Mulders, 2006 .

Redeposition characteristics of focused ion beam milling for nanofabrication

D. D. Winter, J. Mulders, 2007 .

Experimental comparison of two Doppler-free detection methods with a new technique: Differential saturation spectroscopy

J. Mulders, L. Steenhuysen, 1985 .

Purification of Au EBID structures by electron beam post-irradiation under oxygen flux at room temperature

J. Mulders, S. Mehendale, P. Trompenaars, 2015 .

Quantitative autoradiographic measurement of the scattering of protons in a krypton gas target

J. Mulders, L. Steenhuysen, 1985 .

Yield curves and beam current dependent production rates of Rb radioisotopes produced by protons on a krypton gas target

J. Mulders, 1984 .

Ultramicrotomy reveals crystallographic information on a sectioned surface of a metallic block specimen

H. Gnaegi, H. Zandbergen, A. Sandu, 2010 .

Electron beam induced deposition at elevated temperatures: compositional changes and purity improvement

L. Belova, J. Mulders, A. Riazanova, 2011, Nanotechnology.

Measurements and calculations of FIB milling yield of bulk metals

D. D. Winter, J. Mulders, W.J.H.C.P. Duinkerken, 2007 .

The performance of dyes and dye mixtures of rhodamine 6G/rhodamine 560 and of styryl 8/styryl 9 for single mode cw ring laser operation

J. Mulders, L. Steenhuysen, 1985 .

Oxygen-assisted purification of platinum structures deposited by ion and electron beam induced processes

M. Pérez-Roldan, J. Mulders, P. Trompenaars, 2017 .

Functional nickel-based deposits synthesized by focused beam induced processing

B. Koopmans, M. Verheijen, R. Córdoba, 2016, Nanotechnology.

Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective

C. W. Hagen, C. Hagen, A Botman, 2009, Nanotechnology.

Gas-assisted electron-beam-induced nanopatterning of high-quality titanium oxide

A. Kabashin, L. Belova, Y. Rikers, 2016, Nanotechnology.

Nanopatterning by direct-write atomic layer deposition.

W. Kessels, A. Mackus, J. Mulders, 2012, Nanoscale.

Resist-free fabricated carbon nanotube field-effect transistors with high-quality atomic-layer-deposited platinum contacts

Zhihong Chen, A. Bol, W. Kessels, 2017 .

Rapid electron beam assisted patterning of pure cobalt at elevated temperatures via seeded growth

L. Belova, E. Dahlberg, C. Christophersen, 2011, Nanotechnology.

Fe:O:C grown by focused-electron-beam-induced deposition: magnetic and electric properties

B. Koopmans, M. Ibarra, J. D. de Teresa, 2011, Nanotechnology.

Si amorphization by focused ion beam milling: Point defect model with dynamic BCA simulation and experimental validation.

E. Zschech, W. V. van Dorp, J J L Mulders, 2018, Ultramicroscopy.

Gas-assisted electron-beam-induced nanopatterning of high-quality Si-based insulator

A. Kabashin, L. Belova, Y. Rikers, 2014, Nanotechnology.

A new sequential EBID process for the creation of pure Pt structures from MeCpPtMe3

J. Mulders, S. Mehendale, P. Trompenaars, 2013, Nanotechnology.

Fabrication of pure gold nanostructures by electron beam induced deposition with Au(CO)Cl precursor: deposition characteristics and primary beam scattering effects

J. Mulders, P. Trompenaars, E. Bosch, 2012 .

Three Dimensional Microstructure–Microtexture Characterization of Pipeline Steel

Leo Kestens, Yvan Houbaert, Roumen Petrov, 2007 .

Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective

C. W. Hagen, J. Mulders, Aurélien Botman, 2009, Nanotechnology.

Combined Focused Electron Beam-Induced Deposition and Etching for the Patterning of Dense Lines without Interconnecting Material

C. W. Hagen, P. Kruit, S. Hari, 2020, Micromachines.

Comparison of Pd electron beam induced deposition using two precursors and an oxygen purification strategy

C. Mansilla, J. Mulders, P. Trompenaars, 2017, Nanotechnology.

Graphene devices with bottom-up contacts by area-selective atomic layer deposition

A. Bol, W. Kessels, R. Vervuurt, 2017 .

Towards a single step process to create high purity gold structures by electron beam induced deposition at room temperature

C. Mansilla, J. Mulders, S. Mehendale, 2016, Nanotechnology.

Gas-assisted electron-beam-induced nanopatterning of high-quality Si-based insulator

A. Kabashin, E. Dahlberg, J. Mulders, 2014, Nanotechnology.

Pattern shape control for heat treatment purification of electron-beam-induced deposition of gold from the Me2Au(acac) precursor.

L. Belova, Y. Rikers, J. Mulders, 2012, Langmuir : the ACS journal of surfaces and colloids.

Giant anomalous Hall effect in Fe-based microwires grown by focused-electron-beam-induced deposition

B. Koopmans, M. Ibarra, A. Fernández-Pacheco, 2012 .

Investigation of morphological changes in platinum-containing nanostructures created by electron-beam-induced deposition

M. Hesselberth, J. Mulders, Aurélien Botman, 2008 .

Practical precursor aspects for electron beam induced deposition

J. Mulders, 2014 .