J. Merlin

发表

Characterization of the Residual Stresses in Plastically Deformed Ferrite-Martensite Steels Using Barkhausen Noise Measurements

X. Kleber, A. Hug-Amalric, J. Merlin, 2005 .

Investigation of the Tensile Shear fracture of Advanced High Strength Steel spot welds

D. Fabrègue, S. Dancette, T. Dupuy, 2012 .

Analysis of the Parameters Influencing the Quench-Aging Behavior of Ultra-Low-Carbon Steels

V. Massardier, J. Merlin, 2009 .

Mn-C interaction in Fe-C-Mn steels: Study by thermoelectric power and internal friction

V. Massardier, J. Merlin, M. Soler, 2005 .

Precipitation evolution during the annealing of an interstitial-free steel

V. Massardier, V. Massardier, J Merlin, 2000 .

Comparison of the evaluation of the carbon content in solid solution in extra-mild steels by thermoelectric power and by internal friction

V. Massardier, J. Merlin, M. Soler, 2004 .

Quantitative evaluation of the interstitial content (C and/or N) in solid solution in extra-mild steels by thermoelectric power measurements

V. Massardier, J. Merlin, N. Lavaire, 2004 .

Study of ageing in strained ultra and extra low carbon steels by thermoelectric power measurement

J. Merlin, N. Lavaire, V. Sardoy, 2001 .

Ferrite-martensite steels characterization using magnetic Barkhausen noise measurements

X. Kleber, X. Kleber, J. Merlin, 2004 .

Determination of the Conditions of the Chromium Nitride Formation in a ULC Steel of Fe–Cr–N Type with 0.7% Cr

V. Massardier, J. Merlin, D. Colas, 2007 .

Characterization of the Interaction of the Interstitial Atoms with the Substitutional Atoms and with the Dislocations in Extra-Mild Steels through Coupled Use of Thermoelectric Power and Internal Friction Measurements

J. Merlin, F. Thièry, V. Massardier-Jourdan, 2005 .

Ultra-Rapid Intercritical Annealing to Improve Deep Drawability of Low-Carbon, Al-Killed Steels

D. Fabrègue, S. Cazottes, V. Massardier, 2012, Metallurgical and Materials Transactions A.

Microstructure and Mechanical Properties of Low Carbon Al-Killed Steels after Ultra-Rapid Annealing Cycles

D. Fabrègue, J. Merlin, V. Massardier-Jourdan, 2010 .

Evaluation of the Proportion of Phases and Mechanical Strength of Two-Phase Steels Using Barkhausen Noise Measurements: Application to Commercial Dual-Phase Steel

X. Kleber, A. Hug-Amalric, J. Merlin, 2008 .

Characterization of Metallurgical Transformations in Multi-Phase High Strength Steels by Barkhausen Noise Measurement

X. Kleber, A. Hug-Amalric, J. Merlin, 2007 .

Dual-Phase Steels Characterization Using Magnetic Barkhausen Noise Measurements

X. Kleber, A. Hug-Amalric, J. Merlin, 2005 .

HAZ Microstructures and Local Mechanical Properties of High Strength Steels Resistance Spot Welds

Damien Fabrègue, Sylvain Dancette, Jacques Merlin, 2011 .

Experimental and modeling investigation of the failure resistance of Advanced High Strength Steels spot welds

Damien Fabrègue, V. Massardier, Sylvain Dancette, 2011 .

Determination of aluminium nitride or free nitrogen in low carbon steel

V. Massardier, J. Merlin, M. Soler, 2001 .

Study of the Role Played by Nitrogen on the Deep-Drawing Properties of Aluminium Killed Steel Sheets Obtained after a Continuous Annealing

J. Merlin, M. Soler, V. Massardier-Jourdan, 2003 .

Identification of the nitrides formed during the annealing of a low-carbon low-aluminium steel

C. Esnouf, V. Massardier, J. Merlin, 2001 .

Role of Manganese and Chromium on the Segregation Kinetics of Carbon and Nitrogen to the Dislocations in Ferritic Steels

J. Merlin, D. Colas, V. Massardier-Jourdan, 2007 .

Influence of Manganese and chromium on the segregation kinetics of carbon and nitrogen to the dislocations in heavily deformed ferritic steels

V. Massardier, J. Merlin, D. Colas, 2006 .