Bei He

发表

Microstructure and mechanical properties of directed energy deposited U75V/15-5PH structurally graded material

Hua-ming Wang, Dong Liu, Bo Zhang, 2021, Journal of Alloys and Compounds.

Effect of weld repair on microstructure and mechanical properties of laser additive manufactured Ti-55511 alloy

Xu Cheng, Hua-ming Wang, X. Tian, 2017 .

Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing

Xu Cheng, Xiaohui Chen, Hua-ming Wang, 2017 .

Characterization of Microstructures Formed during Nonequilibrium Thermal Cycles in a TiAl Alloy Fabricated by Direct Metal Deposition

Xu Cheng, Shuquan Zhang, Hua-ming Wang, 2020, Advanced Engineering Materials.

A Review on Additive Manufacturing of Titanium Alloys for Aerospace Applications: Directed Energy Deposition and Beyond Ti-6Al-4V

Bei He, Y. Zou, Zhiying Liu, 2021, JOM.

Enhanced tensile ductility of an additively manufactured near-α titanium alloy by microscale shear banding

Daolun L. Chen, Bei He, Zhiying Liu, 2022, International Journal of Plasticity.

Heterogeneous Deformation Behavior of Hybrid Manufactured High Strength Titanium Alloy: Coordinate Deformation and Stress Concentration

Hua-ming Wang, Bei He, Shuxin Shen, 2022, SSRN Electronic Journal.

Effect of hatch spacing and laser remelting on the formation of unique crystallographic texture of IN718 superalloy fabricated via laser powder bed fusion

C. Qiu, Bei He, W. Shao, 2022, Optics & Laser Technology.

Microstructure and mechanical properties of high-efficiency laser-directed energy deposited 15-5PH stainless steel

Hua-ming Wang, Jiawei Wang, Bo Zhang, 2022, Materials Characterization.

Microstructure and properties of a novel titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si manufactured by laser additive manufacturing

Hua-ming Wang, X. Tian, Jia Li, 2017 .

High-speed nanoindentation mapping of a near-alpha titanium alloy made by additive manufacturing

Bei He, Jiahui Zhang, Y. Zou, 2021, Journal of Materials Research.

Brittle fracture behavior of a laser additive manufactured near-β titanium alloy after low temperature aging

Hua-ming Wang, Jia Li, Bei He, 2017 .

Microstructure evolution and microhardness of the novel Al–Cu–Li-xSc alloys fabricated by laser rapid melting

Z. Li, X. Tian, Zeyu Sun, 2021, Vacuum.

Microstructure Evolution and Phase Transformation Behavior of Ti17 and γ-TiAl Bimetallic Structure Fabricated by Directed Energy Deposition

Shuquan Zhang, Hua-ming Wang, Bei He, 2022, Journal of Alloys and Compounds.

Effect of laser remelting and heat treatment on microstructure and wear resistance of 2A97 Al-Li alloy

Shuquan Zhang, Hua-ming Wang, Bei He, 2022, Surfaces and Interfaces.

Effect of laser surface remelting and low temperature aging treatments on microstructures and surface properties of Ti-55511 alloy

Hua-ming Wang, X. Tian, Jia Li, 2017 .

Effect of aging on microstructure and wear resistance of Ti-55511/BN composite coating

Hua-ming Wang, Dong Liu, Bei He, 2020 .

Microstructural investigation and mechanical performance of laser cladding repaired bainite steel with AerMet100 steel

Bei He, Bo Zhang, Huamin Wang, 2022, Surface and Coatings Technology.

Effect of thermal cycling on microstructure and mechanical properties of 2A97 Al–Li alloy fabricated by direct laser deposition

R. Chen, Hua-ming Wang, Hai-bo Tang, 2021, Vacuum.

Microstructure evolution and mechanical behavior of Al–Li alloy fabricated by laser melting deposition technique

Hua-ming Wang, Dong Liu, S. Jiao, 2020 .

Study on Microstructure Evolution and Aging Precipitation Behavior of A Novel Al-Li Alloy Fabricated By Laser Rapid Melting

Hua-ming Wang, Kangjie Li, Zeyu Sun, 2022, Journal of Alloys and Compounds.

Texture evolution during sub-critical annealing and its effect on yield strength anisotropy of laser directed energy deposited Ti-6Al-2Zr-1Mo-1V alloy

Shuquan Zhang, Hua-ming Wang, Bei He, 2022, Materials Science and Engineering: A.

Effect of α texture on the anisotropy of yield strength in Ti–6Al–2Zr–1Mo–1V alloy fabricated by laser directed energy deposition technique

Z. Li, Shuquan Zhang, Hua-ming Wang, 2021 .

Investigation on ideal mechanical performance of laser direct energy deposited Ti–6Al–2Zr–1Mo–1V alloy without sub-β transus thermal cycles

Hua-ming Wang, Bei He, Renkai Li, 2022, Vacuum.

Solidification behavior and grain morphology of laser additive manufacturing titanium alloys

Z. Li, Hai-bo Tang, Bei He, 2019, Journal of Alloys and Compounds.

Alpha texture induced fracture mechanism of laser directed energy deposited Ti-6Al-2Zr-1Mo-1V alloy with changing directions

Bei He, Renkai Li, 2022, Materials letters (General ed.).

ω-assisted α phase and hardness of Ti-5Al-5Mo-5V-1Cr-1Fe during low temperature isothermal heat treatment after laser surface remelting

Hua-ming Wang, Jia Li, Bei He, 2017 .

Laser surface alloying with carbon on 15-5PH steel for improved wear resistance

Hua-ming Wang, Dong Liu, Bei He, 2020 .

Study of icosahedral quasi-crystalline phase T2-Al6CuLi3 and transformation in 2A97 Al-Li alloy fabricated by laser additive manufacturing

Hua-ming Wang, Zeyu Sun, Bei He, 2022, Materials Letters.

Effects of post homogeneity heat treatment processes on microstructure evolution behavior and tensile mechanical properties of laser additive manufactured ultrahigh-strength AerMet100 steel

Hua-ming Wang, Dong Liu, Jia Li, 2018 .

Radiative characteristics of a particle using a bump and pit sphere model

Keyong Zhu, Yong Huang, Wen Li, 2018, Journal of Quantitative Spectroscopy and Radiative Transfer.

Small-depth nanoindentation studies of an additively manufactured titanium alloy: Anisotropic nanomechanical properties and correlation with microscopic mechanical behaviour

Daolun L. Chen, Bei He, Zhiying Liu, 2023, Materialia.

Fabrication of TiAl alloy with no multiple heat-affected bands using continuous direct energy deposition

Hua-ming Wang, Jiawei Wang, Yu Wu, 2020 .

Impact of absorptivity and wavelength on the optical properties of aggregates with sintering necks

Yujia Bao, Yong Huang, Bei He, 2018 .

Phase evolution of a heat-treatable aluminum alloy during laser additive manufacturing

Jing Li, Z. Li, Shuquan Zhang, 2018 .

Developing a novel lightweight Al–Mg–Li alloy for laser powder bed fusion additive manufacturing: Parameter optimization, microstructure evolution, and mechanical performance

Hua-ming Wang, X. Tian, Zeyu Sun, 2023, Materials Science and Engineering: A.

Surface grain formation mechanism in the laser remelting molten pool of a near-β titanium alloy

X. Tian, Bei He, W. Shao, 2022, Materialia.

Anomalous precipitation of Al3Sc dispersoids on deformation behavior of a novel Al-Cu-Li alloy fabricated by direct energy deposition

Hua-ming Wang, Zeyu Sun, Bei He, 2022, Materials Letters.

Investigation on laser cladding Fe-based gradient coatings with hierarchical enhanced wear resistance on U75V railway steel

Bei He, Bo Zhang, Huaming Wang, 2024, Wear.