Yuhe Deng

发表

Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling

Jie Zhang, Wang Wang Yu, W. Yu, 2017 .

Temperature-dependent mechanical properties of wood-adhesive bondline evaluated by nanoindentation

Siqun Wang, W. Yu, Xinzhou Wang, 2017 .

Investigating the nanomechanical behavior of thermosetting polymers using high-temperature nanoindentation

Siqun Wang, D. Xing, Xinzhou Wang, 2015 .

Enhancement of mechanical strength of particleboard using environmentally friendly pine (Pinus pinaster L.) tannin adhesives with cellulose nanofibers

N. Brosse, Juqing Cui, L. Chrusciel, 2014, Annals of Forest Science.

Effect of the penetration of isocyanates (pMDI) on the nanomechanics of wood cell wall evaluated by AFM-IR and nanoindentation (NI)

Siqun Wang, Xinzhou Wang, Yuhe Deng, 2017 .

Effects of accelerated aging treatment on the microstructure and mechanics of wood-resin interphase

Siqun Wang, Xinzhou Wang, Yuhe Deng, 2018 .

Multi-scale evaluation of the effects of nanoclay on the mechanical properties of wood/phenol formaldehyde bondlines

Siqun Wang, Xuqin Xie, Xinzhou Wang, 2017 .

Elemental Analysis of Reed and Manufacture of Composites Using Mixture of Reed and Poplar

Xinzhou Wang, Yuhe Deng, Xiangrui Wang, 2012 .

Effect of interface modification on mechanical and thermal properties of high-density polyethylene/silvergrass composites

Wen-guang Lei, Yuhe Deng, D. Xue, 2015 .

Microstructure and Mechanical Properties of Silvergrass Fiber Cell Walls Evaluated by Nanoindentation

Yujie Meng, Siqun Wang, Xinzhou Wang, 2012 .

Enhancement of mechanical strength of particleboard using environmentally friendly pine (Pinus pinaster L.) tannin adhesives with cellulose nanofibers

N. Brosse, Juqing Cui, L. Chrusciel, 2014, Annals of Forest Science.

Evaluating the flammability of wood-based panels and gypsum particleboard using a cone calorimeter

Jiayan Luo, H. Kim, Byoungho Lee, 2011 .

In situ identification of the molecular-scale interactions of phenol-formaldehyde resin and wood cell walls using infrared nanospectroscopy

Siqun Wang, K. Kjoller, A. Roy, 2016 .

Effect of plasma treatment on the surface characteristics and adhesive penetration performance of heat-treated wood

Xianxu Zhan, Wanzhao Li, C. Mei, 2022, Holzforschung.

Incorporation of graphitic nano‐filler and poly(lactic acid) in fused deposition modeling

Jie Zhang, Wang Wang Yu, W. Yu, 2017 .

Evaluation of the effects of compression combined with heat treatment by nanoindentation (NI) of poplar cell walls

Yujie Meng, Siqun Wang, Xinzhou Wang, 2014 .

Physico‐Mechanical Properties and the TVOC Emission Factor of Gypsum Particleboards Manufactured with Pinus Massoniana and Eucalyptus Sp.

Jiayan Luo, Sumin Kim, H. Kim, 2007 .

Observation and analysis of gypsum particleboard using SEM

Sumin Kim, Wen-guang Lei, Yuhe Deng, 2007 .

Study on Gypsum-Bonded Particleboard Reinforced with Jute Fibres

T. Furuno, Yuhe Deng, 2002 .

Characteristics of Silvergrass and Feasibility of Silica as a Waterproof Agent in Silvergrass Particleboard

Wei Wang, Xinzhou Wang, Yuhe Deng, 2013 .

PLA/Coffee Grounds Composite for 3D Printing and Its Properties

Yan Yao, W. Yu, Xinzhou Wang, 2023, Forests.

Improvement on the properties of gypsum particleboard by adding cement

T. Furuno, Yuhe Deng, T. Uehara, 1998, Journal of Wood Science.

Effect of a waterproof agent on gypsum particleboard properties

Yuhe Deng, Qianying Feng, Ling Xuan, 2006 .

Mechanical properties of nano SiO2 filled gypsum particleboard

Wen-guang Lei, Yuhe Deng, Qianying Feng, 2006 .

Nanoscale Characterization of Reed Stalk Fiber Cell Walls

Yujie Meng, Siqun Wang, Xinzhou Wang, 2013 .

Microstructure Design Strategy for Molecularly Dispersed Cobalt Phthalocyanine and Efficient Mass Transport in CO2 Electroreduction.

Jun Yu Li, L. Zhang, Q. Liao, 2023, Small.