Donghui Yang

发表

Comparative analysis for corrosion resistance of micro-arc oxidation coatings on coarse-grained and ultra-fine grained AZ91D Mg alloy

D. Song, A. Ma, Jinghua Jiang, 2013 .

Recent progress in stabilizing hybrid perovskites for solar cell applications

C. Ni, Jiajia Wang, D. Song, 2017 .

Dynamic Compression Properties of an Ultrafine-Grained Al-26 wt.% Si Alloy Fabricated by Equal-Channel Angular Pressing

D. Song, A. Ma, Jinghua Jiang, 2015, Journal of Materials Engineering and Performance.

Significantly improved corrosion resistance of heat-treated Mg–Al–Gd alloy containing profuse needle-like precipitates within grains

D. Song, A. Ma, Jinghua Jiang, 2015 .

Sulphuric acid corrosion of ultrafine-grained mild steel processed by equal-channel angular pressing

D. Song, A. Ma, Jinghua Jiang, 2013 .

Mechanical Response of Nano-Porous Copper under Different Temperature and Strain Rate through Molecular Dynamics Simulations

Lei Wang, Donghui Yang, S. Wei, 2018, Materials Science Forum.

Electrochemical corrosion properties of the surface layer produced by supersonic fine-particles bombarding on low-carbon steel

D. Song, A. Ma, Jinghua Jiang, 2013 .

Effect of multi-pass equal channel angular pressing on microstructure and mechanical properties of Mg97.1Zn1Gd1.8Zr0.1 alloy

J. Chen, D. Song, A. Ma, 2014 .

Review on long-period stacking-ordered structures in Mg-Zn-RE alloys

A. Ma, Jinghua Jiang, Qi Zhou, 2012, Rare Metals.

Review on the Influence of Different Reinforcements on the Microstructure and Wear Behavior of Functionally Graded Aluminum Matrix Composites by Centrifugal Casting

D. Song, A. Ma, Jinghua Jiang, 2019, Metals and Materials International.

Recent progress in porous Mg-based foam preparation approaches: effect of processing parameters on structure and mechanical property

A. Ma, Jinghua Jiang, Lei Wang, 2021, Journal of Iron and Steel Research International.

Mold-Filling Ability of Aluminum Alloy Melt during the Two-Step Foaming Process

X. J. Liu, Zhaoping Lu, H. Wang, 2016 .

Effects of scandium additions on mechanical properties of cellular Al-based foams

Hui Wang, Donghui Yang, F. Ye, 2012 .

Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties

Hui Wang, Si-yuan He, D. He, 2010 .

Compression properties of cellular AlCu5Mn alloy foams with wide range of porosity

A. Ma, Donghui Yang, JingLong Jiang, 2009 .

Coupling Effect of Porosity and Cell Size on the Deformation Behavior of Al Alloy Foam under Quasi-Static Compression

Hui Wang, Jiapeng Sun, A. Ma, 2019, Materials.

Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution

P. Lin, D. Song, A. Ma, 2010 .

Improving in-vitro biocorrosion resistance of Mg-Zn-Mn-Ca alloy in Hank's solution through addition of cerium

Fan Zhang, D. Song, Jinghua Jiang, 2015 .

Enhanced mechanical properties and rolling formability of fine-grained Mg–Gd–Zn–Zr alloy produced by equal-channel angular pressing

D. Song, A. Ma, Jinghua Jiang, 2015 .

Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP

P. Lin, D. Song, Jinghua Jiang, 2009 .

Effect of ECAP combined cold working on mechanical properties and electrical conductivity of Conform-produced Cu–Mg alloys

Yuan Yuan, D. Song, A. Ma, 2014 .

Anti-corrosion performance of waterborne Zn-rich coating with modified silicon-based vehicle and lamellar Zn (Al) pigments

D. Song, A. Ma, Jinghua Jiang, 2012 .

Improving corrosion resistance of RE-containing magnesium alloy ZE41A through ECAP

Y. Nishida, P. Lin, N. Saito, 2009 .

Study on fabrication and foaming mechanism of Mg foam using CaCO3 as blowing agent

B. Hur, Donghui Yang, Shang-Run Yang, 2008 .

Effect of Main Parameters on the Mechanical and Wear Behaviour of Functionally Graded Materials by Centrifugal Casting: A Review

D. Song, A. Ma, Jinghua Jiang, 2019, Metals and Materials International.

Mg Alloy Foam Fabrication via Powder Metallurgy and its Compressive Behavior

Hui Wang, A. Ma, Jinghua Jiang, 2015 .

Quasi-Static Compression Deformation and Energy Absorption Characteristics of Basalt Fiber-Containing Closed-Cell Aluminum Foam

Yujiang Wang, Zicheng Zhang, Jian Ding, 2020, Metals.

Fabrication of Mg-Al alloy foam with close-cell structure by powder metallurgy approach and its mechanical properties

Hui Wang, A. Ma, Jinghua Jiang, 2016 .

Improving both strength and ductility of a Mg alloy through a large number of ECAP passes

Y. Nishida, I. Shigematsu, N. Saito, 2009 .

Fabrication and compressive properties of cellular Mg foam via melt foaming method

Hui Wang, A. Ma, Jinghua Jiang, 2012 .

Compressive properties of cellular Mg foams fabricated by melt-foaming method

W. Hui, C. Jianqing, M. Ai-bin, 2010 .

Fabrication of Al foam without thickening process through melt-foaming method

A. Ma, Jinghua Jiang, Lei Wang, 2018 .

Preparation principle and compression properties of cellular Mg–Al–Zn alloy foams fabricated by the gas release reaction powder metallurgy approach

A. Ma, Jinghua Jiang, Lei Wang, 2021 .

Fabrication of Cu-Mg alloy foam with close pore structure by gas release reaction powder metallurgical approach

A. Ma, Jinghua Jiang, Lei Wang, 2018, Journal of Alloys and Compounds.

Fabrication of cellular Zn–Mg alloy foam by gas release reaction via powder metallurgical approach

Hui Wang, A. Ma, Jinghua Jiang, 2017 .

Fabrication of cellular Mg alloy by gas release reaction via powder metallurgical approach

Hui Wang, A. Ma, Jinghua Jiang, 2017 .

Fabrication of Zn Alloy Foam via Powder Metallurgical Approach

Lei Wang, A. Ma, Jinghua Jiang, 2016 .

Effect of Decomposition Kinetics of Titanium Hydride on the Al Alloy Melt Foaming Process

Hui Wang, A. Ma, Jinghua Jiang, 2015 .

Manufacture of Aluminum Foam without Thickening Agent via Melt Foaming Method and its Compressive Behavior

Hui Wang, A. Ma, Jinghua Jiang, 2015 .

Effects of calcium on mechanical properties of cellular Al–Cu foams

Z. Lu, H. Wang, L. Huang, 2014 .

The relationship between thermal decomposition properties of titanium hydride and the Al alloy melt foaming process

B. Hur, Donghui Yang, 2006 .

Microstructural evolution and mechanical response of Cu–Al–Be–B shape memory alloy processed by repetitive equal channel angular pressing

P. Lin, A. Ma, Jinghua Jiang, 2010 .

Enhancement of strength-ductility synergy in ultrafine-grained Cu-Zn alloy prepared by ECAP and subsequent annealing

Qiyu Zhang, D. Song, Jiapeng Sun, 2022, Journal of Materials Research and Technology.

Low-Temperature Reactive Sintered Porous Mg-Al-Zn Alloy Foams

Hong Wu, L. Wang, Donghui Yang, 2022, Metals.

Enhanced Low-Temperature Impact Toughness of Ultra-Fine Grained SiCp/ZL108 Composites

D. Song, A. Ma, Jinghua Jiang, 2012 .

Fluoride Adsorption Properties of CeO2 Powders and Al Foam Loaded CeO2

D. Song, A. Ma, Jinghua Jiang, 2015 .

Recent progress in enhancing solar-to-hydrogen efficiency

Dan Song, Jianqing Chen, Michael Z. Hu, 2015 .

Effects of Scandium on Corrosion Resistance and Mechanical Properties of Cellular Al-Based Foams

Zhaoping Lu, Hui Wang, Donghui Yang, 2013 .

Improved corrosion resistance in simulated concrete pore solution of surface nanocrystallized rebar fabricated by wire-brushing

Wei Sun, Jin-yang Jiang, D. Song, 2014 .

Large-area preparation of defect-repaired fluorocarbon polymer coatings on graphene for long-term corrosion resistance

Q. Xue, Wenjie Zhao, Jibin Pu, 2019, Progress in Organic Coatings.

Research Progress of Phase Change Materials (PCMs) Embedded with Metal Foam (a Review)

D. Song, A. Ma, Jinghua Jiang, 2014 .

Combined Shear and Bending Behavior of Joints in Precast Concrete Segmental Beams with External Tendons

Yu Lei, Guoping Li, Donghui Yang, 2013 .

Scaling laws and mechanical properties of nanoporous copper

Lei Wang, Donghui Yang, Lin-kai Guo, 2017 .

Anticorrosion behavior of ultrafine-grained Al-26 wt% Si alloy fabricated by ECAP

D. Song, A. Ma, Jinghua Jiang, 2012, Journal of Materials Science.

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

D. He, Donghui Yang, Shangrun Yang, 2004 .

Porosity of porous Al alloys

D. He, Donghui Yang, 2001 .

Effect of Mg on Compression Property of Porous Zn Alloys Fabricated by Low-Temperature Reactive Sintering Powder Metallurgy Approach

Lei Wang, Donghui Yang, Jian-qing Chen, 2023, JOM.

Low-Temperature Fabrication of Porous Mg-Zn Foams by a Reactive Sintering Powder Metallurgy Approach

Lei Wang, Donghui Yang, Jian-qing Chen, 2023, Journal of Materials Engineering and Performance.

High mechanical properties of rolled ZK60 Mg alloy through pre-equal channel angular pressing

D. Song, A. Ma, Jinghua Jiang, 2016 .

Preparation and performances of bulk porous Al foams impregnated with phase-change-materials for thermal storage

Dan Song, Jun Shi, Jianqing Chen, 2012 .