P. Xu

发表

Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold

Zhi-shui Yu, Chonggui Li, Hua Yan, 2013 .

Microstructure and tribological behavior of amorphous and crystalline composite coatings using laser melting

Zhi-shui Yu, Chonggui Li, Hua Yan, 2012 .

Synthesis of Fe–Ni–B–Si–Nb amorphous and crystalline composite coatings by laser cladding and remelting

Zhi-shui Yu, Hua Yan, Pei-lei Zhang, 2011 .

Numerical simulation of laser–tungsten inert arc deep penetration welding between WC–Co cemented carbide and invar alloys

Shanglei Yang, F. Lu, Chunwei Ma, 2011 .

Dissimilar welding of WC–Co cemented carbide to Ni42Fe50.9C0.6Mn3.5Nb3 invar alloy by laser–tungsten inert gas hybrid welding

P. Xu, 2011 .

The influence of carbides on the microstructure, grain growth, and oxidation resistance of nanostructured carbides-strengthened cobalt-based multi-track laser-cladding layers

Yuzhen Zhang, P. Xu, H. Gong, 2019, Applied Surface Science.

Influence of different annealing temperatures and cooling rates on amorphous and crystalline composite coating

Zhi-shui Yu, Qinghua Lu, Chonggui Li, 2012 .

Microstructure characterization of Ti−6Al−4V titanium laser weld and its deformation

P. Xu, 2012 .

Effect of Y2O3 addition on microstructure of Ni-based alloy + Y2O3/substrate laser clad

Shun Yao, Peiquan Xu, Guoxiang Xu, 2008 .

Effect of holding time and interlayer's thickness on the crack initiation and propagation and the dissolving behavior of the heat-treated facet WC grains

F. Lu, H. Cui, P. Xu, 2018 .

The WC-Co/Fe–Ni interface: Effect of holding time on the microstructure, grain size and grain growth mechanism

P. Xu, Xiaonan Wang, Dong-ran Zhou, 2019 .

Migration Behavior of Tungsten Carbide in the Dissimilar Joints of WC-TiC-Ni/304 Stainless Steel Using Robotic MIG Welding

P. Xu, H. Gong, G. Ying, 2018 .

Microstructure, wear, and oxidation resistance of nanostructured carbide-strengthened cobalt-based composite coatings on Invar alloys by laser cladding

F. Lu, H. Cui, Y. Zou, 2020 .

Analysis of WC Dissolution Phenomenon Happened in TIG Welded Joint of Cemented Carbide and Invar Alloy

Chunwei Ma, P. Xu, D. Ma, 2012 .

Study on microstructure and properties of Ni-based alloy/Y2O3-deposited metals by laser cladding

Zhi-shui Yu, Guoxiang Xu, P. Xu, 2008 .

Surface Microstructure of Fe3Al After Severe Plastic Deformation

P. Xu, Dong Li, J. Ren, 2013, Journal of Materials Engineering and Performance.

Welded seam 3D calculation and seam location for welding robot system

Xinhua Tang, S. Yao, Xinhua Tang, 2006 .

Analysis of Formation and Interfacial WC Dissolution Behavior of WC-Co/Invar Laser-TIG Welded Joints

P. Xu, H. Gong, J. Ren, 2013, Journal of Materials Engineering and Performance.

Microstructure characterisation and CTE study of Fe—42Ni—Nb invar alloys

X. Zhao, P. Xu, Z. Yu, 2011 .

Macro characteristics of dissimilar high strength steel resistance spot welding joint

P. Xu, J. Ren, Youqiong Qin, 2016 .

Numerical analysis for effect of process parameters of low-current micro-PAW on constricted arc

Chunwei Ma, Peiquan Xu, Shun Yao, 2009 .

Tungsten Carbide Grain Size Computation for WC-Co Dissimilar Welds

F. Lu, H. Cui, P. Xu, 2016, Journal of Materials Engineering and Performance.

Relationship between the γ and some parameters of Fe-based bulk metallic glasses

Hua Yan, Pei-lei Zhang, Chengwu Yao, 2012 .

A visual seam tracking system for robotic arc welding

Xinhua Tang, Guoxiang Xu, Shun Yao, 2008 .

Fiber laser welding of WC-Co to carbon steel using Fe-Ni Invar as interlayer

F. Lu, P. Xu, D. Yao, 2016 .