C. Li

发表

The Bonding Formation during Thermal Spraying of Ceramic Coatings: A Review

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2022, Journal of Thermal Spray Technology.

Sintering behavior of BaCe0.7Zr0.1Y0.2O3-δ electrolyte at 1150 °C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance

Cheng-Xin Li, Jiu-tao Gao, C. Li, 2021, International Journal of Hydrogen Energy.

Room-Temperature Deposition of Nano-TiO2 Coating by Vacuum Cold Spraying Using TiCl4-Aagglomerated Nano-TiO2 Powder for Flexible Dye-Sensitized Solar Cell

Guanjun Yang, Shengqiang Fan, Jin-Cheng Gao, 2008 .

Achieving the high phase purity of CH3NH3PbI3 film by two-step solution processable crystal engineering

Yan Li, Guanjun Yang, Bin Ding, 2017, Journal of Materials Science & Technology.

The Bonding Formation during Thermal Spraying of Ceramic Coatings: A Review

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2022, Journal of Thermal Spray Technology.

Progress in ceramic materials and structure design toward advanced thermal barrier coatings

Liang Wang, Z. Ma, W. Pan, 2022, Journal of Advanced Ceramics.

Epitaxial Grain Growth during 8YSZ Splat Formation on Polycrystalline YSZ Substrates by Plasma Spraying

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2015, International Thermal Spray Conference.

Numerical simulation of the flow characteristics inside a novel plasma spray torch

A. Murphy, Guanjun Yang, J. Trelles, 2019, Journal of Physics D: Applied Physics.

Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma‐Sprayed TBCs

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2014 .

Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure

Guanjun Yang, C. Li, Hongtao Wang, 2008 .

Fabrication of Metal Matrix Composites via High-Speed Particle Implantation

Chang-jiu Li, Cheng-Xin Li, C. Li, 2020, Journal of Thermal Spray Technology.

Enhanced Corrosion Resistance of a Double Ceramic Composite Coating Deposited by a Novel Method on Magnesium-Lithium Alloy (LA43M) Substrates

Chang-jiu Li, Cheng-Xin Li, C. Li, 2021, Journal of Thermal Spray Technology.

Dominant effect of particle size on the CeO2 preferential evaporation during plasma spraying of La2Ce2O7

Guanjun Yang, Cheng-Xin Li, Li-Shuang Wang, 2017 .

Development of Particle Interface Bonding in Thermal Spray Coatings: A Review

Chang-Jiu Li, Guanjun Yang, Cheng-Xin Li, 2013, Journal of Thermal Spray Technology.

A comprehensive mechanism for the sintering of plasma-sprayed nanostructured thermal barrier coatings

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017 .

Force transmission and its effect on structural changes in plasma-sprayed lamellar ceramic coatings

Guanjun Yang, Cheng-Xin Li, Guangrong Li, 2017 .

High Heat Insulating Thermal Barrier Coating Designed with Large Two-Dimensional Inter-lamellar Pores

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2015, Journal of Thermal Spray Technology.

Characterization of Nonmelted Particles and Molten Splats in Plasma-Sprayed Al2O3 Coatings by a Combination of Scanning Electron Microscopy, X-ray Diffraction Analysis, and Confocal Raman Analysis

Guanjun Yang, Cheng-Xin Li, C. Li, 2013, Journal of Thermal Spray Technology.

Influence of Microstructure on the Ionic Conductivity of Plasma‐Sprayed Yttria‐Stabilized Zirconia Deposits

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2008 .

Influence of TGO Composition on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-sprayed MCrAlY Bond Coat

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2010 .

Fabrication of Porous Molybdenum by Controlling Spray Particle State

Chang-jiu Li, Biao Chen, Guanjun Yang, 2012, Journal of Thermal Spray Technology.

Formation of NiAl Intermetallic Compound by Cold Spraying of Ball-Milled Ni/Al Alloy Powder Through Postannealing Treatment

Guanjun Yang, Cheng-Xin Li, Qiang Zhang, 2008, International Thermal Spray Conference.

Microstructural and Mechanical Property Evolutions of Plasma-Sprayed YSZ Coating During High-Temperature Exposure: Comparison Study Between 8YSZ and 20YSZ

Guanjun Yang, Cheng-Xin Li, C. Li, 2013, Journal of Thermal Spray Technology.

High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process

Chang-jiu Li, Cheng-Xin Li, C. Li, 2020, Surface and Coatings Technology.

Heterogeneous layered structure in thermal barrier coatings by plasma spray-physical vapor deposition

Guanjun Yang, C. Li, Mei-Jun Liu, 2023, Journal of Advanced Ceramics.

Deposition and oxidation behavior of atmospheric laminar plasma sprayed Mo coatings from 200 mm to 400 mm under 20 kW: Numerical and experimental analyses

Chang-jiu Li, Cheng-Xin Li, C. Li, 2020 .

Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2015 .

Combined effect of internal and external factors on sintering kinetics of plasma-sprayed thermal barrier coatings

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2019, Journal of the European Ceramic Society.

Strain/sintering co-induced multiscale structural changes in plasma-sprayed thermal barrier coatings

Guanjun Yang, Cheng-Xin Li, Xuefeng Chen, 2018 .

Substrate-constrained effect on the stiffening behavior of lamellar thermal barrier coatings

Guanjun Yang, Cheng-Xin Li, Guangrong Li, 2018, Journal of the European Ceramic Society.

Conditions and mechanisms for the bonding of a molten ceramic droplet to a substrate after high-speed impact

Guanjun Yang, Cheng-Xin Li, C. Li, 2016 .

Recent Research Advances in Plasma Spraying of Bulk-Like Dense Metal Coatings with Metallurgically Bonded Lamellae

Chang Li, Xiao-Tao Luo, Cheng-Xin Li, 2022, Journal of Thermal Spray Technology.

Effect of Oxidation on the Bonding Formation of Plasma-Sprayed Stainless Steel Splats onto Stainless Steel Substrate

Guanjun Yang, Cheng-Xin Li, Jun Wang, 2016, Journal of Thermal Spray Technology.

Effect of intersplat interface bonding on the microstructure of plasma-sprayed Al2O3 coating

Guanjun Yang, Cheng-Xin Li, C. Li, 2014 .

Plasma-Sprayed Y2O3-Stabilized ZrO2 Electrolyte With Improved Interlamellar Bonding for Direct Application to Solid Oxide Fuel Cells

Cheng-Xin Li, C. Li, Shan-Lin Zhang, 2014 .

Microstructure and Properties of Porous Ni50Cr50-Al2O3 Cermet Support for Solid Oxide Fuel Cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2012, Journal of Thermal Spray Technology.

Development of a Ni/Al2O3 Cermet-Supported Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by Atmospheric Plasma-Spraying

Guanjun Yang, Cheng-Xin Li, C. Li, 2009 .

Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats

Guanjun Yang, Cheng-Xin Li, Ya-Zhe Xing, 2008 .

Microstructural evolution of alumina coatings by a novel long laminar plasma spraying method

Cheng-Xin Li, Yue-peng Wang, C. Li, 2019, Surface and Coatings Technology.

Formation of Inter‐Splat Bonding and Intra‐Splat Microstructure During Plasma Spraying of Ceramic Coating

Guanjun Yang, Cheng-Xin Li, C. Li, 2014 .

Transport and deposition behaviors of vapor coating materials in plasma spray-physical vapor deposition

Guanjun Yang, Cheng-Xin Li, Mengtong Zhang, 2019, Applied Surface Science.

Thermodynamic conditions for cluster formation in supersaturated boundary layer during plasma spray-physical vapor deposition

Guanjun Yang, Cheng-Xin Li, Mengtong Zhang, 2019, Applied Surface Science.

Influence of Annealing on Photocatalytic Performance and Adhesion of Vacuum Cold-Sprayed Nanostructured TiO2 Coating

Chang-jiu Li, Guanjun Yang, Shengqiang Fan, 2007 .

Mechanical property and wear performance dependence on processing condition for cold-sprayed WC-(nanoWC-Co)

Guanjun Yang, Cheng-Xin Li, P. Gao, 2015 .

Microstructure and properties of lightweight Al0.2CrNbTiV refractory high entropy alloy coating with different dilutions deposited by high speed laser cladding

Kang Liu, Cheng-Xin Li, C. Li, 2022, Surface and Coatings Technology.

WC-Co Composite Coating Deposited by Cold Spraying of a Core-Shell-Structured WC-Co Powder

Xiao-Tao Luo, F. Shang, Guanjun Yang, 2014, Journal of Thermal Spray Technology.

Microstructure of YSZ Coatings Deposited by PS-PVD Using 45 kW Shrouded Plasma Torch

Guanjun Yang, Cheng-Xin Li, Jian-Zhuang Zhao, 2016 .

Simultaneous strengthening and toughening effects in WC–(nanoWC–Co)

Guanjun Yang, Cheng-Xin Li, P. Gao, 2012 .

Prolong the durability of La2Zr2O7/YSZ TBCs by decreasing the cracking driving force in ceramic coatings

Chang-jiu Li, Guanjun Yang, Zhi-Yuan Wei, 2018, Journal of the European Ceramic Society.

La0.8Sr0.2Ga0.8Mg0.2O3 electrolytes prepared by vacuum cold spray under heated gas for improved performance of SOFCs

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018, Ceramics International.

Deposition Behavior of Semi-Molten Spray Particles During Flame Spraying of Porous Metal Alloy

Guanjun Yang, Cheng-Xin Li, C. Li, 2014, Journal of Thermal Spray Technology.

Influence of Substrate Hardness on Deposition Behavior of Single Porous WC-12Co Particles in Cold Spraying

Guanjun Yang, Cheng-Xin Li, P. Gao, 2008, International Thermal Spray Conference.

Liquid plasma sprayed nano-network La 0.4 Sr 0.6 Co 0.2 Fe 0.8 O 3 /Ce 0.8 Gd 0.2 O 2 composite as a high-performance cathode for intermediate-temperature solid oxide fuel cells

Kevin Huang, Chang-jiu Li, Guanjun Yang, 2016 .

Numerical analysis of the plasma-induced self-shadowing effect of impinging particles and phase transformation in a novel long laminar plasma jet

Chang-jiu Li, J. Trelles, Cheng-Xin Li, 2020, Journal of Physics D: Applied Physics.

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Chang-jiu Li, Martin Motola, Cheng-Xin Li, 2022, Chemical Engineering Journal.

Highly active and novel A-site deficient symmetric electrode material (Sr0.3La0.7)1−x (Fe0.7Ti0.3)0.9Ni0.1O3−δ and its effect on electrochemical performance of SOFCs

M. Yasir, Cheng-Xin Li, Yue-peng Wang, 2021 .

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

M. Yasir, Cheng-Xin Li, Yue-peng Wang, 2020 .

Hierarchical Formation of Intrasplat Cracks in Thermal Spray Ceramic Coatings

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2016, Journal of Thermal Spray Technology.

Effect of Dispersed TiC Content on the Microstructure and Thermal Expansion Behavior of Shrouded-Plasma-Sprayed FeAl/TiC Composite Coatings

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2012, Journal of Thermal Spray Technology.

A comprehensive sintering mechanism for thermal barrier coatings‐Part III: Substrate constraint effect on healing of 2D pores

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018 .

Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection

Guanjun Yang, Cheng-Xin Li, Li-Shuang Wang, 2015, Journal of Thermal Spray Technology.

Modeling Thermal Conductivity of Thermally Sprayed Coatings with Intrasplat Cracks

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013, Journal of Thermal Spray Technology.

RELATION BETWEEN MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF PLASMA-SPRAYED 8YSZ COATING

Chang-jiu Li, Guanjun Yang, C. Li, 2010 .

Sintering‐induced delamination of thermal barrier coatings by gradient thermal cyclic test

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017 .

Critical scale grain size for optimal lifetime of TBCs

Guanjun Yang, C. Li, G. Meng, 2022, Journal of Materials Science & Technology.

Novel Method of Aluminum to Copper Bonding by Cold Spray

Yingkang Wei, Xiao-Tao Luo, Chang-jiu Li, 2018, Journal of Thermal Spray Technology.

High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review

Fulin Shang, Chang-Jiu Li, Xiao-Tao Luo, 2014 .

Characterization of Nanostructured WC-Co Deposited by Cold Spraying

Chang-jiu Li, Guanjun Yang, Yu-Yue Wang, 2007, International Thermal Spray Conference.

Performance and Stability of Plasma-Sprayed 10 × 10 cm2 Self-sealing Metal-Supported Solid Oxide Fuel Cells

Cheng-Xin Li, Yue-peng Wang, Jiu-tao Gao, 2021, Journal of Thermal Spray Technology.

Cost effective perovskite solar cells with a high efficiency and open-circuit voltage based on a perovskite-friendly carbon electrode

B. Fang, Chang-jiu Li, Guanjun Yang, 2018 .

A novel structure of YSZ coatings by atmospheric laminar plasma spraying technology

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018, Scripta Materialia.

Self-Sealing Metal-Supported SOFC Fabricated by Plasma Spraying and Its Performance under Unbalanced Gas Pressure

Chang-jiu Li, Cheng-Xin Li, Yue-peng Wang, 2020, Journal of Thermal Spray Technology.

The influence of temperature gradient across YSZ on thermal cyclic lifetime of plasma-sprayed thermal barrier coatings

Chang-jiu Li, Guanjun Yang, H. Cai, 2015 .

Splash involved deposition behavior and erosion mechanism of long laminar plasma sprayed NiCrBSi coatings

Guanjun Yang, Cheng-Xin Li, C. Li, 2020 .

Non-Parabolic Isothermal Oxidation Kinetics of Low Pressure Plasma Sprayed MCrAlY Bond Coat

Guanjun Yang, Cheng-Xin Li, C. Li, 2017, International Thermal Spray Conference.

Plasma spray–physical vapor deposition toward advanced thermal barrier coatings: a review

Chang-jiu Li, Jiaping Han, Guanjun Yang, 2020, Rare Metals.

Evolution of Lamellar Interface Cracks During Isothermal Cyclic Test of Plasma-Sprayed 8YSZ Coating with a Columnar-Structured YSZ Interlayer

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013, Journal of Thermal Spray Technology.

Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018 .

Evaporation of Droplets in Plasma Spray–Physical Vapor Deposition Based on Energy Compensation Between Self-Cooling and Plasma Heat Transfer

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, Journal of Thermal Spray Technology.

Low-Pressure Plasma-Induced Physical Vapor Deposition of Advanced Thermal Barrier Coatings: Microstructures, Modelling and Mechanisms

A. Murphy, Chang-jiu Li, Hongbo Guo, 2021 .

Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ Using a <80 kW Shrouded Torch Based on Optical Emission Spectroscopy

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2015, Journal of Thermal Spray Technology.

A Review and Progress of Multiphase Flows in Atmospheric and low Pressure Plasma Spray Advanced Coating

J. Trelles, Cheng-Xin Li, C. Li, 2022, Materials Today Physics.

In-situ heating effect of laminar plasma jet during Mo coatings deposition

Chang-jiu Li, Cheng-Xin Li, C. Li, 2021 .

Development of long laminar plasma jet on thermal spraying process: Microstructures of zirconia coatings

Guanjun Yang, Cheng-Xin Li, C. Li, 2018 .

Gradient thermal cyclic behaviour of La2Zr2O7/YSZ DCL-TBCs with equivalent thermal insulation performance

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017 .

Fabrication of Porous Stainless Steel by Flame Spraying of Semimolten Particles

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2014 .

Super-Hydrophobic Surface Prepared by Lanthanide Oxide Ceramic Deposition Through PS-PVD Process

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, Journal of Thermal Spray Technology.

Edge Effect on Crack Patterns in Thermally Sprayed Ceramic Splats

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, Journal of Thermal Spray Technology.

A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near Inter-splat Interfaces

Xiao-Tao Luo, Chang-jiu Li, Guanjun Yang, 2015, Journal of Thermal Spray Technology.

Microstructures of aluminum surfaces reinforced with 316L stainless steel particles via high-speed particle injection and the resulting double-strengthening mechanism

Xiao-Tao Luo, Chang-jiu Li, M. Yasir, 2020 .

Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2008 .

Performance of La0.8Sr0.2Ga0.8Mg0.2O3-based SOFCs with atmospheric plasma sprayed La-doped CeO2 buffer layer

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018, Electrochimica Acta.

Application of high velocity oxygen fuel flame (HVOF) spraying to fabrication of La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte for solid oxide fuel cells

Guanjun Yang, Cheng-Xin Li, C. Li, 2016 .

Enhanced sintering behavior of LSGM electrolyte and its performance for solid oxide fuel cells deposited by vacuum cold spray

Guanjun Yang, Cheng-Xin Li, Li-Shuang Wang, 2017 .

Chemical compatibility and properties of suspension plasma-sprayed SrTiO3-based anodes for intermediate-temperature solid oxide fuel cells

Cheng-Xin Li, C. Li, Shan-Lin Zhang, 2014 .

Vacuum cold sprayed nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ as a high-performance cathode for porous metal-supported solid oxide fuel cells operating below 600 °C

Chang-jiu Li, Cheng-Xin Li, Y. Shang, 2021 .

Modification of microstructure and electrical conductivity of plasma-sprayed YSZ deposit through post-densification process

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2006 .

Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells

Chang-jiu Li, Cheng-Xin Li, C. Li, 2005 .

Large-area high-efficiency perovskite solar cells based on perovskite films dried by the multi-flow air knife method in air

Gao Lili, Chang-Jiu Li, Guanjun Yang, 2017 .

Ultra-high open-circuit voltage of perovskite solar cells induced by nucleation thermodynamics on rough substrates

Chang-jiu Li, Yan Li, Mingkui Wang, 2017, Scientific Reports.

Preparation of flexible perovskite solar cells by a gas pump drying method on a plastic substrate

Bin Ding, Gao Lili, Lusheng Liang, 2016 .

High performance of ceramic current collector fabricated at 550 °C through in-situ joining of reduced Mn1.5Co1.5O4 for metal-supported solid oxide fuel cells

Chang-jiu Li, Cheng-Xin Li, Jiu-tao Gao, 2020 .

Advanced oxygen-electrode-supported solid oxide electrochemical cells with Sr(Ti,Fe)O3−δ-based fuel electrodes for electricity generation and hydrogen production

Chang-jiu Li, S. Barnett, Hongqian Wang, 2020, Journal of Materials Chemistry A.

Improving WC-Co coating adhesive strength on rough substrate: Finite element modeling and experiment

Guanjun Yang, Yu-Yue Wang, Cheng-Xin Li, 2020 .

Effect of Post-spray Shot Peening Treatment on the Corrosion Behavior of NiCr-Mo Coating by Plasma Spraying of the Shell–Core–Structured Powders

Yingkang Wei, Chang-jiu Li, Guanjun Yang, 2017, Journal of Thermal Spray Technology.

Effect of composition of NiO/YSZ anode on the polarization characteristics of SOFC fabricated by atmospheric plasma spraying

Liejin Guo, Chang-jiu Li, Cheng-Xin Li, 2010 .

Characterization of the microstructure and electrochemical behavior of Sm0.7Sr0.3Co3−δ cathode deposited by solution precursor plasma spraying

Shuai Liu, Cheng-Xin Li, C. Li, 2012 .

Sodium ionic conductivity and stability of amorphous Na 2 O·2SiO 2 added with M x O y (M = Zr, Y, and Sm)

Cheng-Xin Li, C. Li, Shan-Lin Zhang, 2018 .

Structured La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with large-scale vertical cracks by atmospheric laminar plasma spraying for IT-SOFCs

Guanjun Yang, Cheng-Xin Li, Yue-peng Wang, 2020 .

Thermally sprayed MCO/FeCr24 interconnector with improved stability for tubular segmented-in-series SOFCs

Cheng-Xin Li, Jiu-tao Gao, C. Li, 2022, Applied Surface Science.

Dense Mn1.5Co1.5O4 coatings with excellent long-term stability and electrical performance under the SOFC cathode environment

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2020 .

Effect of Phase Transformation Mechanism on the Microstructure of Cold-sprayed Ni/Al-Al2O3 Composite Coatings during Post-spray Annealing Treatment

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013, Journal of Thermal Spray Technology.

Improving Erosion Resistance of Plasma-Sprayed Ceramic Coatings by Elevating the Deposition Temperature Based on the Critical Bonding Temperature

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, Journal of Thermal Spray Technology.

Influence of substrate hardness transition on built-up of nanostructured WC-12Co by cold spraying

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2010 .

Microstructural Characterization of Cold-Sprayed Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled Feedstock Powders

Hong-Tao Wang, Chang-Jiu Li, Guanjun Yang, 2007, International Thermal Spray Conference.

Effect of water environment on particle deposition of underwater cold spray

Xiao-Tao Luo, Chang-jiu Li, Yi Liu, 2020 .

Effect of Fe doping on the performance of suspension plasma-sprayed PrBa0.5Sr0.5Co2−xFexO5+δ cathodes for intermediate-temperature solid oxide fuel cells

Chang-jiu Li, Cheng-Xin Li, C. Li, 2017 .

Suspension Plasma Sprayed Sr2Fe1.4Mo0.6O6−δ Electrodes for Solid Oxide Fuel Cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, Journal of Thermal Spray Technology.

Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying

Guanjun Yang, Cheng-Xin Li, Xiao-Ming Wang, 2012 .

Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited by suspension plasma spraying

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2010 .

Dominant microstructural feature over photocatalytic activity of high velocity oxy-fuel sprayed TiO2 coating

Chang-jiu Li, Guanjun Yang, Yu-Yue Wang, 2007 .

Low-temperature SnO2-modified TiO2 yields record efficiency for normal planar perovskite solar modules

Chang-jiu Li, Yan Li, Guanjun Yang, 2018 .

Microstructural analysis of highly active cathode material La0.7Sr0.3Ti0.15Fe0.65Ni0.2O3-δ (LSTFN) by optimizing different processing parameters

M. Yasir, Cheng-Xin Li, Yue-peng Wang, 2021 .

Electrochemical performance and stability of SrTi0.3Fe0.6Co0.1O3-δ infiltrated La0.8Sr0.2MnO3Zr0.92Y0.16O2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells

S. Barnett, Hongqian Wang, Cheng-Xin Li, 2019, Journal of Power Sources.

Characterization of the Microstructure and Electrical Conductivity of Plasma-Sprayed La0:5Sr0:5CoO3 Coating

Guanjun Yang, Yu-Yue Wang, Cheng-Xin Li, 2006 .

Investigation on Microstructure Evolution of Iron-Based Alloy Via Synchronous Powder-Feeding Underwater Laser Additive

H. Cho, Cheng-Xin Li, C. Li, 2023, SSRN Electronic Journal.

Thermally Sprayed Large Tubular Solid Oxide Fuel Cells and Its Stack: Geometry Optimization, Preparation, and Performance

Chang-jiu Li, B. Song, Shuai Liu, 2017, Journal of Thermal Spray Technology.

Plasma-sprayed lanthanum-doped strontium titanate as an interconnect for solid oxide fuel cells: Effects of powder size and process conditions

Kevin Huang, Chang-jiu Li, Xian-jin Liao, 2021 .

Non-destructive production of natural environment-adaptive super-hydrophobic hierarchical ceramic surface on a steel substrate

B. Fang, Chang-jiu Li, Guanjun Yang, 2016 .

Thermally sprayed high-performance porous metal-supported solid oxide fuel cells with nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes

Chang-jiu Li, Samson Y. Lai, Haibin Sun, 2016 .

Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2011 .

Influence of the Surface Roughness of Plasma-Sprayed YSZ on LSM Cathode Polarization in Solid Oxide Fuel Cells

Chang-jiu Li, Cheng-Xin Li, C. Li, 2008 .

Microstructure, performance and stability of Ni/Al2O3 cermet-supported SOFC operating with coal-based syngas produced using supercritical water

Liejin Guo, Chang-Jiu Li, Liejin Guo, 2012 .

Performance of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell operating with biomass-based syngas through supercritical water

Liejin Guo, Chang-jiu Li, Cheng-Xin Li, 2010 .

Cobalt-substituted SrTi0.3Fe0.7O3−δ: a stable high-performance oxygen electrode material for intermediate-temperature solid oxide electrochemical cells

S. Barnett, Hongqian Wang, L. Mogni, 2018 .

Phase Formation during Deposition of TiO2 Coatings through High Velocity Oxy-Fuel Spraying

Chang-jiu Li, Guanjun Yang, A. Ohmori, 2006 .

High stability SrTi1−xFexO3−δ electrodes for oxygen reduction and oxygen evolution reactions

S. Barnett, B. Park, Cheng-Xin Li, 2019, Journal of Materials Chemistry A.

Relationship Between Lamellar Structure and Elastic Modulus of Thermally Sprayed Thermal Barrier Coatings with Intra-splat Cracks

Guang-Rong Li, Bowen Lv, Chang-Jiu Li, 2015, Journal of Thermal Spray Technology.

Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5 mol% YSZ coating

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2006 .

Narrow and Thin Copper Linear Pattern Deposited by Vacuum Cold Spraying and Deposition Behavior Simulation

Cheng-Xin Li, C. Li, Kai Ma, 2020, Journal of Thermal Spray Technology.

Origin of preferential orientation of rutile phase in thermally sprayed TiO2 coatings

Chang-jiu Li, Guanjun Yang, Yu-Yue Wang, 2008 .

Influence of Annealing on the Microstructure and Wear Performance of Diamond/NiCrAl Composite Coating Deposited through Cold Spraying

Guanjun Yang, Cheng-Xin Li, C. Li, 2010 .

Controlling grain size in columnar YSZ coating formation by droplet filtering assisted PS-PVD processing

Xiao-Tao Luo, Haibin Sun, Guanjun Yang, 2015 .

Formation of Pore Structure and Its Influence on the Mass Transport Property of Vacuum Cold Sprayed TiO2 Coatings Using Strengthened Nanostructured Powder

Kaiming Liao, Chang-jiu Li, Guanjun Yang, 2012, Journal of thermal spray technology (Print).

Influence of accelerating gas flow rate on the particle cohesion in room temperature cold sprayed scattering layer for plastic-based dye-sensitized solar cells

Guanjun Yang, Xue-Long He, Cheng-Xin Li, 2014 .

Measurement and numerical simulation of particle velocity in cold spraying

Chang-jiu Li, Cheng-Xin Li, H. Bang, 2006, International Thermal Spray Conference.

Examination of substrate surface melting-induced splashing during splat formation in plasma spraying

Chang-jiu Li, Guanjun Yang, Yu-Yue Wang, 2006, International Thermal Spray Conference.

Plasma-Sprayed High-Performance (Bi2O3)0.75(Y2O3)0.25 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Rui Chen, Cheng-Xin Li, C. Li, 2021, Journal of Thermal Spray Technology.

Influence of pre-reduction on microstructure homogeneity and electrical properties of APS Mn1.5Co1.5O4 coatings for SOFC interconnects

Chang-jiu Li, Cheng-Xin Li, C. Li, 2017 .

The Microstructure Stability of Atmospheric Plasma-Sprayed MnCo2O4 Coating Under Dual-Atmosphere (H2/Air) Exposure

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2015, Journal of Thermal Spray Technology.

The Correlation of the TBC Lifetimes in Burner Cycling Test with Thermal Gradient and Furnace Isothermal Cycling Test by TGO Effects

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2016, Journal of Thermal Spray Technology.

A Novel Plasma-Sprayed Durable Thermal Barrier Coating with a Well-Bonded YSZ Interlayer Between Porous YSZ and Bond Coat

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2011, Journal of Thermal Spray Technology.

Room temperature cold sprayed TiO2 scattering layer for high performance and bending resistant plastic-based dye-sensitized solar cells

Chang-jiu Li, Guanjun Yang, Shengqiang Fan, 2014 .

Influence of Silver Doping on Photocatalytic Activity of Liquid-Flame-Sprayed-Nanostructured TiO2 Coating

Guanjun Yang, Yu-Yue Wang, Cheng-Xin Li, 2007, International Thermal Spray Conference.

Effect of Cu2+ doping on photocatalytic performance of liquid flame sprayed TiO2 coatings

Chang-jiu Li, Guanjun Yang, Yu-Yue Wang, 2006 .

Ceramic Nano-particle/Substrate Interface Bonding Formation Derived from Dynamic Mechanical Force at Room Temperature: HRTEM Examination

Guanjun Yang, Shengqiang Fan, Cheng-Xin Li, 2015, Journal of Thermal Spray Technology.

Synergistic effects of high temperature and impact compaction on the nano-TiO2 film for the significant improvement of photovoltaic performance of flexible dye-sensitized solar cells

Guanjun Yang, Shengqiang Fan, Xue-Long He, 2013 .

Effect of TiC addition and high-temperature annealing on the microstructure and electrical conductivity of shrouded-plasma-sprayed FeAl/TiC composites for SOFC support

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013 .

Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating

Chang-jiu Li, Guanjun Yang, C. Li, 2008 .

Influence of Powder Porous Structure on the Deposition Behavior of Cold-Sprayed WC-12Co Coatings

Chang-Jiu Li, Chang-jiu Li, Guanjun Yang, 2008, International Thermal Spray Conference.

Effect of annealing on the microstructure and erosion performance of cold-sprayed FeAl intermetallic coatings

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2011 .

Influence of through-lamella grain growth on ionic conductivity of plasma-sprayed yttria-stabilized zirconia as an electrolyte in solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2008 .

Enhancement of Corrosion Resistance and Tribological Properties of LA43M Mg Alloy by Cold-Sprayed Aluminum Coatings Reinforced with Alumina and Carbon Nanotubes

Chang-jiu Li, M. Yasir, Usman Ahmed, 2021, Journal of Thermal Spray Technology.

Fast Drying Boosted Performance Improvement of Low-Temperature Paintable Carbon-Based Perovskite Solar Cell

B. Fang, Yan Li, Guanjun Yang, 2017 .

Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat

Chang-jiu Li, Shaofeng Zhang, Guanjun Yang, 2008, International Thermal Spray Conference.

Effect of spray conditions on deposition behavior and microstructure of cold sprayed Ni coatings sprayed with a porous electrolytic Ni powder

Chang-Jiu Li, Xiao-Tao Luo, Guanjun Yang, 2016 .

Formation of Cr2O3 Diffusion Barrier Between Cr-Contained Stainless Steel and Cold-Sprayed Ni Coatings at High Temperature

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2016, Journal of Thermal Spray Technology.

Sintering induced the failure behavior of dense vertically crack and lamellar structured TBCs with equivalent thermal insulation performance

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017 .

Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient thermal cycling

Chang-jiu Li, Guanjun Yang, H. Cai, 2015 .

Healing of the Interface Between Splashed Particles and Underlying Bulk Coating and Its Influence on Isothermal Oxidation Behavior of LPPS MCrAlY Bond Coat

Guanjun Yang, Cheng-Xin Li, C. Li, 2014, Journal of Thermal Spray Technology.

Isothermal Oxidation Behavior of NiCoCrAlTaY Coating Deposited by High Velocity Air-Fuel Spraying

Chang-jiu Li, X. Xiang, Guanjun Yang, 2011, Journal of Thermal Spray Technology.

Microstructure, Mechanical Properties, and Two-Body Abrasive Wear Behavior of Cold-Sprayed 20 vol.% Cubic BN-NiCrAl Nanocomposite Coating

Xiao-Tao Luo, Chang-jiu Li, F. Shang, 2014, Journal of Thermal Spray Technology.

In Situ Formation of Continuous Charge Transfer Pathways for Highly Efficient, Solvent-Free, Polymer Electrolyte-Based Dye-Sensitized Solar Cells

B. Fang, Yan Li, Guanjun Yang, 2016 .

Oxidation behavior and interface diffusion of porous metal supported SOFCs with all plasma sprayed functional layers in air at 650oC

Cheng-Xin Li, Yue-peng Wang, Jiu-tao Gao, 2021, International Journal of Green Energy.

Investigation into the diffusion and oxidation behavior of the interface between a plasma-sprayed anode and a porous steel support for solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2016 .

Epitaxial Growth During the Rapid Solidification of Plasma-Sprayed Molten TiO2 Splat

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, International Thermal Spray Conference.

Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013 .

Optimization of Plasma-Sprayed Lanthanum Chromite Interconnector Through Powder Design and Critical Process Parameters Control

Chang-jiu Li, Cheng-Xin Li, C. Li, 2019, Journal of Thermal Spray Technology.

Study of annular coaxial powder feeding effect on the characteristics of laminar plasma jet and atmospheric cluster deposition

Cheng-Xin Li, C. Li, Sen-Hui Liu, 2023, Surface & Coatings Technology.

Generation of Long Laminar Plasma Jets: Experimental and Numerical Analyses

A. Murphy, Chang-jiu Li, J. Trelles, 2019, Plasma Chemistry and Plasma Processing.

Strain-induced multiscale structural changes in lamellar thermal barrier coatings

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017 .

Microstructure, oxygen stoichiometry and electrical conductivity of flame-sprayed Sm0.7Sr0.3CoO3−δ

Chang-jiu Li, Guanjun Yang, Shengqiang Fan, 2009 .

Performance of YSZ electrolyte layer deposited by atmospheric plasma spraying for cermet-supported tubular SOFC

Chang-jiu Li, Cheng-Xin Li, C. Li, 2004 .

Deposition mechanism of convex YSZ particles and effect of electrolyte/cathode interface structure on cathode performance of solid oxide fuel cell

Guanjun Yang, Cheng-Xin Li, Xiao-ming Wang, 2014 .

Evolution of microstructure during annealing of Mn1.5Co1.5O4 spinel coatings deposited by atmospheric plasma spray

Guanjun Yang, Cheng-Xin Li, C. Li, 2014 .

Preparation of hierarchical porous metallic materials via deposition of microporous particles

Chang-jiu Li, Biao Chen, Guanjun Yang, 2016 .

Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2019, Journal of Thermal Spray Technology.

Scandia-stabilized zirconia electrolyte with improved interlamellar bonding by high-velocity plasma spraying for high performance solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013 .

Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2010 .

Dependence of scale thickness on the breaking behavior of the initial oxide on plasma spray bond coat surface during vacuum pre-treatment

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017 .

Stage-sensitive microstructural evolution of nanostructured TBCs during thermal exposure

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018, Journal of the European Ceramic Society.

Morphology and Size Evolution of Interlamellar Two-Dimensional Pores in Plasma-Sprayed La2Zr2O7 Coatings During Thermal Exposure at 1300 °C

Xiao-Tao Luo, Chang-jiu Li, Guanjun Yang, 2015, Journal of Thermal Spray Technology.

Improvement of Adhesion and Cohesion in Plasma-Sprayed Ceramic Coatings by Heterogeneous Modification of Nonbonded Lamellar Interface Using High Strength Adhesive Infiltration

Chang-jiu Li, K. Kondoh, Guanjun Yang, 2013, Journal of Thermal Spray Technology.

Understanding the Formation of Limited Interlamellar Bonding in Plasma Sprayed Ceramic Coatings Based on the Concept of Intrinsic Bonding Temperature

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2016, Journal of Thermal Spray Technology.

Characterization of atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2008 .

Influence of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2006 .

Effect of Gas Pressure on Polarization of SOFC Cathode Prepared by Plasma Spray

Chang-jiu Li, Shuai Liu, Cheng-Xin Li, 2013, Journal of Thermal Spray Technology.

Sintering characteristics of plasma-sprayed TBCs: Experimental analysis and an overall modelling

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018 .

Plasma Spraying of Dense Ceramic Coating with Fully Bonded Lamellae Through Materials Design Based on the Critical Bonding Temperature Concept

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2019, Journal of Thermal Spray Technology.

Ratchet Increasing Temperature Induced Stiffening and Intra-column Fracture of PS-PVD TBCs

Guanjun Yang, C. Li, Mei-Jun Liu, 2023, Journal of thermal spray technology (Print).

High temperature oxidation behavior of NiCoCrAlFeY high entropy bond coating fabricated by high-speed laser cladding

Cheng-Xin Li, C. Li, Li-yan Lou, 2024, Corrosion Science.

Improving inter-particle deformation and bonding by preserving transient in-situ deposition temperatures during cold spray

Guanjun Yang, C. Li, Mei-Jun Liu, 2023, Surface and Coatings Technology.

Simultaneously improving strength and abradability for abradable seal coatings by localized bonding hollow spheres

C. Li, Lin Chen, Guan-Jun Yang, 2024, Journal of Materials Science & Technology.

Porous spheres enabling excellent high-temperature abradability and long lifetime for abradable seal coating

Guanjun Yang, C. Li, Lin Chen, 2023, Journal of the European Ceramic Society.

Response of NiCrAl-bentonite abradable seal coatings to thermal/salt corrosion

C. Li, Lin Chen, Guan-Jun Yang, 2024, Corrosion Science.

A matching design co-enhancing thermal barrier and thermal cyclic performances of sintering-resistant coatings

Xiao-Tao Luo, Guanjun Yang, C. Li, 2023, Ceramics International.

Effects of Powder Structure and Size on Gd2O3 Preferential Vaporization During Plasma Spraying of Gd2Zr2O7

Guanjun Yang, Cheng-Xin Li, C. Li, 2019, Journal of Thermal Spray Technology.