D. Rickerby

发表

The interrelationship between internal stress, processing parameters and microstructure of physically vapour deposited and thermally sprayed coatings☆

K. T. Scott, I. Buckley-golder, D. Rickerby, 1987 .

Erosion and Foreign Object Damage of Thermal Barrier Coatings

J. Nicholls, D. Rickerby, Y. Jaslier, 1997 .

Methods to reduce the thermal conductivity of EB-PVD TBCs

K. Lawson, J. Nicholls, A. Johnstone, 2002 .

Overview no. 51 Structure and thermochemistry of nitrided iron-titanium alloys

K. Jack, D. Rickerby, A. Hendry, 1986 .

Erosive wear of thermally sprayed tungsten coatings

S. Bull, K. T. Scott, D. Rickerby, 1991 .

The erosion behaviour of TiN coatings on steels

D. Rickerby, P. Burnett, 1988 .

Erosion of EB-PVD thermal barrier coatings

J. Nicholls, D. Rickerby, Y. Jaslier, 1998 .

Comparative performance of selected bond coats in advanced thermal barrier coating systems

H. M. Tawancy, N. Sridhar, N. Abbas, 2000 .

A new spallation mechanism of thermal barrier coatings and a generalized mechanical model

R. Thomson, Simon Wang, C. Harvey, 2019, Composite Structures.

High temperature mechanical properties of physical vapour deposited titanium nitride

T. Page, S. Bull, D. Rickerby, 1992 .

X-ray diffraction studies of physically vapour-deposited coatings

A. Jones, D. Rickerby, B. Bellamy, 1989 .

High-temperature x-ray diffraction studies on physical vapour deposited TiN

S. Bull, A. Jones, D. Rickerby, 1989 .

Structure of Titanium Nitride coatings deposited by physical vapour deposition: A unified structure model

A. Perry, A. Jones, D. Rickerby, 1988 .

An Investigation of Process Parameters for Electrophoretic Deposition of Yttria‐Stabilized Zirconia Using Design of Experiments

P. Xiao, Hui Xu, Robert E. Jones, 2011 .

The Effect of High Temperature Thermal Cycling on Near-Surface Sulphur Partitioning in Gamma and Gamma Prime Phases and Its Implications on Sulphur Segregation in Coated Ni-Base Superalloys

N. D’Souza, D. Rickerby, I. Edmonds, 2016, Oxidation of Metals.

Comparative thermal stability characteristics and isothermal oxidation behavior of an aluminized and a Pt-aluminized Ni-base superalloy

H. M. Tawancy, N. Abbas, D. Rickerby, 1995 .

The influence of titanium interlayers on the adhesion of titanium nitride coatings obtained by plasma-assisted chemical vapour deposition

P. Chalker, S. Bull, D. Rickerby, 1991 .

Internal stress and adherence of titanium nitride coatings

D. Rickerby, 1986 .

The role of titanium in the abrasive wear resistance of physically vapour-deposited TiN☆

T. Robertson, S. Bull, D. Rickerby, 1990 .

New developments in the modelling of the hardness and scratch adhesion of thin films

S. Bull, D. Rickerby, 1990 .

Engineering with surface coatings: The role of coating microstructure

S. Bull, D. Rickerby, 1989 .

The hardness and elastic modulus of TiN films as determined by ultra-low load indentation

W. Oliver, C. McHargue, S. Bull, 1990 .

Market perspective and future trends

A. Matthews, D. Rickerby, 1991 .

Effect of superalloy substrate composition on the performance of a thermal barrier coating system

H. M. Tawancy, R. Jones, N. Abbas, 2003 .

The scratch adhesion test: An elastic-plastic indentation analysis

D. S. Rickerby, P. J. Burnett, D. Rickerby, 1988 .

Correlation of process and system parameters with structure and properties of physically vapour- deposited hard coatings

D. Rickerby, P. Burnett, 1988 .

Internal Stress and Microstructure of Titanium Nitride Coatings

A. Jones, D. Rickerby, B. Bellamy, 1987 .

Internal stress in titanium nitride coatings: modelling of complex stress systems

A. Jones, D. Rickerby, B. Bellamy, 1988 .

A review of the methods for the measurement of coating-substrate adhesion☆

D. Rickerby, 1988 .

The relationship between hardness and scratch adhession

D. S. Rickerby, P. J. Burnett, D. Rickerby, 1987 .

The use of scratch adhesion testing for the determination of interfacial adhesion: The importance of frictional drag

D. S. Rickerby, Juhani Valli, Steve Bull, 1988 .

A review of the methods for the evaluation of coating-substrate adhesion

P. Chalker, S. Bull, D. Rickerby, 1991 .

A comparison between the erosion behaviour of thermal spray and electron beam physical vapour deposition thermal barrier coatings

J. Nicholls, M. J. Deakin, D. Rickerby, 1999 .

COATINGS FOR GAS TURBINES

D. S. Rickerby, M. R. Winstone, D. Rickerby, 1992 .

Effect of substrate curvature on residual stresses and failure modes of an air plasma sprayed thermal barrier coating system

J. Nicholls, P. Flewitt, Dong Liu, 2013 .

The mechanical properties of wear-resistant coatings: I: Modelling of hardness behaviour

D. S. Rickerby, P. J. Burnett, D. Rickerby, 1987 .

The mechanical properties of wear-resistant coatings: II: Experimental studies and interpretation of hardness

D. Rickerby, P. Burnett, 1987 .

Low-temperature aging of nitrided FeTi alloys

K. Jack, D. Rickerby, A. Hendry, 1986 .

Strengthening of nitrided FeTi alloys

D. Rickerby, A. Hendry, 1986 .

Lattice parameters of iron–titanium solid solutions

D. Rickerby, 1982 .

Spontaneous formation and morphology of telephone cord blisters in thin films: The Ω formulae

R. Thomson, Simon Wang, C. Harvey, 2019, Composite Structures.

Evolution of interfacial toughness of a thermal barrier system with a Pt-diffused γ/γ′ bond coat

P. Xiao, Xiaofeng Zhao, D. Rickerby, 2011 .

Compositional, microstructural and morphological effects on the mechanical and tribological properties of chromium nitrogen films

S. Bull, D. Rickerby, 1990 .

The wear and erosion resistance of hard PVD coatings

D. Rickerby, P. Burnett, 1987 .

Assessment of Coating Hardness

D. Rickerby, P. Burnett, 1987 .

Advanced Surface Coatings: A Handbook of Surface Engineering

A. Matthews, D. Rickerby, 1991 .

Evaluation of coatings

S. Bull, D. Rickerby, 1989 .

The sliding wear of titanium nitride coatings

S. Bull, D. Rickerby, A. Jain, 1990 .

The use of titanium nitride as a diffusion barrier for MCrAlY coatings

J. Coad, D. Rickerby, B. C. Oberlander, 1985 .

Measurement of coating adhesion

D. Rickerby, 1996 .

Multi-pass scratch testing as a model for abrasive wear

D. S. Rickerby, Steve Bull, S. Bull, 1989 .

Coating techniques for metal matrix composites

D. Rickerby, 1988 .

Influence of cold work on mechanical properties of Fe–Ti–N alloys

K. Jack, D. Rickerby, A. Hendry, 1986 .

Creep of Plasma Sprayed CoNiCrAlY and NiCrAlY Bond Coats and its Effects on Residual Stresses During Thermal Cycling of Thermal Barrier Coating Systems

J. A. Thompson, T. Clyne, R. Reed, 2020 .

Three-dimensional displacement mapping of diffused Pt thermal barrier coatings via synchrotron X-ray computed tomography and digital volume correlation

M. Mostafavi, C. Reinhard, J. Marrow, 2016 .

Failure mechanism of a thermal barrier coating system on a nickel-base superalloy

H. M. Tawancy, N. Abbas, D. Rickerby, 1998 .