Jingjing Liang

发表

Computational Design of Novel Ni Superalloys with Low Crack Susceptibility for Additive Manufacturing

Jinguo Li, Z. Bi, Hao Yu, 2022, Metallurgical and Materials Transactions A.

Influence of debinding holding time on mechanical properties of 3D-printed alumina ceramic cores

Q. Zeng, Jinguo Li, Yongsheng Liu, 2020 .

Enhanced 3D printed Al2O3 core via in-situ mullite

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Additive Manufacturing.

Stereolithography 3D printing of ceramic cores for hollow aeroengine turbine blades

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Journal of Materials Science & Technology.

Balancing flexural strength and porosity in DLP-3D printing Al2O3 cores for hollow turbine blades

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2021, Journal of Materials Science & Technology.

Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum

Yongsheng Liu, Zhi-Gang Lu, He Li, 2020 .

Manufacturing of ceramic cores: From hot injection to 3D printing

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Journal of Materials Science & Technology.

Controlling the anisotropy behaviour of 3D printed ceramic cores: From intralayer particle distribution to interlayer pore evolution

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Additive Manufacturing.

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Jinguo Li, Xiuyuan Zhang, Jingjing Liang, 2022, Ceramics International.

Defect control in digital light processing of high-solid-loading ceramic core

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Ceramics International.

High-temperature oxidation performance of Ni-based GH3536 superalloy fabricated by laser powder bed fusion

Hui Liu, A. Huang, Huawei Zhang, 2022, npj Materials Degradation.

Compositional optimization of high-solid-loading ceramic cores via 3D printing

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Additive Manufacturing.

Effect of synergism of solid loading and sintering temperature on microstructural evolution and mechanical properties of 60 vol% high solid loading ceramic core obtained through stereolithography 3D printing

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Journal of the European Ceramic Society.

Effect of Rejuvenation Heat Treatment on the Creep Property and Microstructural Evolution of a Ni-Base Superalloy

Yuan Liu, Linning Wang, Jingjing Liang, 2020, Applied Sciences.

Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores

Q. Zeng, Yongsheng Liu, Zhi-Gang Lu, 2020, Journal of Advanced Ceramics.

Silica strengthened alumina ceramic cores prepared by 3D printing

Yongsheng Liu, He Li, Yansong Liu, 2020 .

Recent advances in the stereolithographic three-dimensional printing of ceramic cores: Challenges and prospects

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Journal of Materials Science & Technology.

Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics

Q. Zeng, Yongsheng Liu, Zhi-Gang Lu, 2020 .

In-situ synthesis of high-performance Al2O3-based ceramic cores reinforced with core-shell structures

Jinguo Li, Jiaqi Liu, Xiuyuan Zhang, 2022, Ceramics International.

Influence of zircon on cristobalite crystallization of silicabased ceramic cores

C. Jo, Xiao-feng Sun, T. Jin, 2016 .

Ceramic composites toughened by vat photopolymerization 3D printing technology

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Journal of Materials Science & Technology.

Effect of burying sintering on the properties of ceramic cores via 3D printing

Q. Zeng, Yongsheng Liu, Zhi-Gang Lu, 2020 .

Effect of heat treatment on the microstructure and tensile properties of a new superalloy designed for additive manufacturing

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Materials Science and Engineering: A.

3D printed ceramic slurries with improved solid content through optimization of alumina powder and coupling agent

Yongsheng Liu, He Li, Yansong Liu, 2021 .

Crack initiation and propagation in a high-solid-loading ceramic core fabricated through stereolithography 3D printing

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2022, Open Ceramics.

Thermal and Mechanical Variation Analysis on Multi-Layer Thin Wall during Continuous Laser Deposition, Continuous Pulsed Laser Deposition, and Interval Pulsed Laser Deposition

Xiangwei Kong, Jinguo Li, Cong Sun, 2022, Materials.

Pt-Al bond coat dependence on the high-cycle fatigue rupture and deformation mechanisms of a fourth-generation single crystal superalloy at various temperatures

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2023, Materials & Design.

Influence of sintering temperature and CVI time on mechanical properties of 3D-printed alumina ceramics

Jinguo Li, Yongsheng Liu, He Li, 2021 .

Investigation on tensile deformation and fracture behavior of a Ni-based superalloy specially designed for additive manufacturing

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2023, Materialia.

Slurry flow characteristics control of 3D printed ceramic core layered structure: Experiment and simulation

H. Mei, Yi-zhou Zhou, Xiao-feng Sun, 2023, Journal of Materials Science & Technology.

Effect of Zr on microstructure and hot cracking susceptibility of ZGH451 superalloy fabricated by Direct energy deposition

Yi-zhou Zhou, Xiao-feng Sun, Jinguo Li, 2023, Journal of Alloys and Compounds.

High solid loading, low viscosity stereolithography 3D printing ceramic cores slurry

Jingjing Liang, Qiaolei Li, Yuxiang Qiu, 2023, Ceramics International.

Cyclic oxidation-induced deleterious effects of Ru on the surface rumpling of a Pt-modified aluminide coating

Yi-zhou Zhou, Xinguang Wang, Jingjing Liang, 2024, Surface and Coatings Technology.

Effect of coatings on oxidation behavior of a fourth generation Ni-based single crystal superalloys at ultra high temperature

Yi-zhou Zhou, Jingjing Liang, X. Tao, 2024, Surface and Coatings Technology.

A new approach to design advanced superalloys for additive manufacturing

Yi-zhou Zhou, Jinguo Li, Jingjing Liang, 2024, Additive Manufacturing.

The effect of carbon content on the printability and mechanical properties of Ni-based superalloy in laser additive manufacturing

Jinguo Li, Jingjing Liang, Yahang Mu, 2024, Materials Science and Engineering: A.

The influence of additive manufacturing on Portevin-Le Châtelier (PLC) effect in Ni-Co-based superalloy

Jinguo Li, Jingjing Liang, Xiaofeng Sun, 2024, Journal of Materials Research and Technology.