C. Poblano-Salas

发表

Flame Sprayed LaNi5-Based Mischmetal Alloy: Building-up Negative Electrodes for Potential Application in Ni-Based Batteries

J. Porcayo-Calderón, M. Navarro, J. Henao, 2021, Journal of Thermal Spray Technology.

Bio-active glass coatings manufactured by thermal spray: a status report

J. Henao, C. Poblano-Salas, J. Corona-Castuera, 2019, Journal of Materials Research and Technology.

Principles and Applications of Thermal Spray Coatings

J. Henao, C. Poblano-Salas, O. Sotelo-Mazón, 2021 .

Effect of HVOF Processing Parameters on the Properties of NiCoCrAlY Coatings by Design of Experiments

J. Alvarado-Orozco, J. Muñoz-Saldaña, F. Espinoza-Beltrán, 2014, Journal of Thermal Spray Technology.

Corrosion of Biomaterials

J. Henao, C. Poblano-Salas, O. Sotelo-Mazón, 2020, New Challenges and Industrial Applications for Corrosion Prevention and Control.

Laser Cladding Deposition of a Fe-based Metallic Glass on 304 Stainless Steel Substrates

J. Alvarado-Orozco, J. Henao, C. Poblano-Salas, 2022, Journal of Thermal Spray Technology.

Stress relaxation study of water atomized Cu–Cr–Zr powder alloys consolidated by inverse warm extrusion

C. Poblano-Salas, J. Barceinas-Sánchez, 2009 .

Descriptive and inferential study of hardness, fatigue life, and crack propagation on PLA 3D-printed parts

C. Poblano-Salas, V. H. Mercado-Lemus, J. Betancourt-Cantera, 2022, Materials Today Communications.

Evaluation of Corrosion Inhibition of 1018 Carbon Steel using an Avocado Oil-Based Green Corrosion Inhibitor

J. Porcayo-Calderón, J. Henao, L. Martinez-Gomez, 2020, Protection of Metals and Physical Chemistry of Surfaces.

Characterization of a C-Based Coating Applied on an AA6063 Alloy and Developed by a Novel Electrochemical Synthesis Route

J. C. Díaz-Guillén, G. Trápaga-Martínez, C. Poblano-Salas, 2020 .

Effect of the modification of spray drying parameters on the fabrication of bovine-derived hydroxyapatite microspheres for biomedical applications

J. Henao, C. Poblano-Salas, D. G. Espinosa-Arbeláez, 2022, Materials Today Communications.

HVOF Hydroxyapatite/Titania-Graded Coatings: Microstructural, Mechanical, and In Vitro Characterization

J. Alvarado-Orozco, J. Henao, C. Poblano-Salas, 2018, Journal of Thermal Spray Technology.

Exploring hydroxyapatite/graphene oxide/zinc oxide composite powders for the preparation of bioactive-antibacterial coatings by HVOF

Gabriela Martínez, J. Henao, C. Poblano-Salas, 2022, Applied Physics A.

Study of HVOF-sprayed hydroxyapatite/titania graded coatings under in-vitro conditions

J. Henao, L. Martinez-Gomez, C. Poblano-Salas, 2020 .

Characterization of Yb2Si2O7–Yb2SiO5 composite environmental barrier coatings resultant from in situ plasma spray processing

S. Sampath, G. Trápaga, C. Poblano-Salas, 2020 .

Surface oxidation of Ni20Cr/Cr 3 O 2 composite processed by ball milling and HVOF thermal spraying

E. Martínez-Franco, I. López-Báez, C. Poblano-Salas, 2017 .

Parameter Studies on High-Velocity Oxy-Fuel Spraying of CoNiCrAlY Coatings Used in the Aeronautical Industry

F. Almeraya-Calderón, C. Gaona-Tiburcio, G. K. Pedraza-Basulto, 2014 .

The effect of cobalt additions on the mechanical and electrical properties of Cu–Cr–Zr melt-spun ribbons

C. Poblano-Salas, 2008 .

Control Parameters Correlation by Multiple Linear Robust Regression for the Design of Heat Treatments For Al-6063 Alloy

S. Serna, C. Poblano-Salas, V. H. Mercado-Lemus, 2018, Experimental Techniques.

Effects of VC additions on the mechanical properties of bimodal WC–Co HVOF thermal sprayed coatings measured by nanoindentation

G. Trápaga-Martínez, J. Muñoz-Saldaña, H. Ruiz-Luna, 2015 .

Design and Fabrication of a Customized Partial Hip Prosthesis Employing CT-Scan Data and Lattice Porous Structures

J. Henao, C. Poblano-Salas, J. Corona-Castuera, 2021, ACS omega.

Nozzle Geometry and Particle Size Influence on the Behavior of Low Pressure Cold Sprayed Hydroxyapatite Particles

J. Henao, C. Poblano-Salas, J. Corona-Castuera, 2022, Coatings.

On the manufacturability of Inconel 718 thin-walled honeycomb structures by laser powder bed fusion

J. Henao, C. Poblano-Salas, J. Corona-Castuera, 2021, Rapid Prototyping Journal.

High temperature properties of Cu–Cr–Zr alloys processed by conventional inverse extrusion of atomised powders and comparison with Conform consolidated powders

C. Poblano-Salas, 2009 .

Corrosion Behavior of AISI 409Nb Stainless Steel Manufactured by Powder Metallurgy Exposed in H2SO4 and NaCl Solutions

P. Zambrano-Robledo, F. Almeraya-Calderón, J. Chacón-Nava, 2013, International Journal of Electrochemical Science.

Additive manufactured gyroid-based cell structures under compression: design, testing and simulation for biomedical applications.

J. Henao, C. Poblano-Salas, J. Corona-Castuera, 2023, Computer methods in biomechanics and biomedical engineering.

Thermal Spray Deposition, Phase Stability and Mechanical Properties of La2Zr2O7/LaAlO3 Coatings

J. Alvarado-Orozco, J. Muñoz-Saldaña, H. Ruiz-Luna, 2017, Journal of Thermal Spray Technology.

On the deposition of cold-sprayed hydroxyapatite coatings

J. Henao, C. Poblano-Salas, J. Corona-Castuera, 2024, Surface and Coatings Technology.

On the formation of porosity in hydroxyapatite/polyester high-velocity oxygen-fuel sprayed coatings and their electrochemical behavior in simulated body fluid

Jorge Corona Castuera, J. Henao, C. Poblano-Salas, 2023, Applied Physics A.

HVOF-sprayed HAp/S53P4 BG composite coatings on an AZ31 alloy for potential applications in temporary implants

J. Henao, C. Poblano-Salas, D. G. Espinosa-Arbeláez, 2024, Journal of Magnesium and Alloys.