J. Hwang

发表

Water-matrix interaction at the drop-drop interface during drop-on-demand printing of hydrogels

G. Chiu, Yong‐Cheol Jeong, B. Han, 2020 .

Temperature effect on physical properties and surface morphology of printed silver ink during continuous laser scanning sintering

S. Moon, Kyongtae Ryu, Y. Moon, 2017 .

Rapid sintering of copper nano ink using a laser in air

Sang-Ho Lee, J. Yu, Heuiseok Kang, 2014 .

Effects of tube diameter and submergence ratio on bubble pattern and performance of air-lift pump

C. Sohn, J. Hwang, Seung Hwan Kim, 2014 .

Experimental Study of Performance and Bubble Pattern of Air-Lift Pumps with Various Tube Diameters and Submergence Ratios

C. Sohn, J. Hwang, Seung Hwan Kim, 2013 .

Dropwise gelation-dehydration kinetics during drop-on-demand printing of hydrogel-based materials

G. Chiu, Kinam Park, J. Boley, 2016 .

Sintering process of inkjet-printed silver patterns using a heated inert gas

K. Shin, Sang-Ho Lee, K. Kang, 2018, Microelectronic Engineering.

Laser Curing of the Silver/Copper Nanoparticle Ink via Optical Property Measurement and Calculation

S. Moon, J. Hwang, Tae-Young Kim, 2010 .

Study of Specific Resistance of Conductive Ink According to Temperature During Laser Sintering Process

S. Moon, Ji-Young Park, Heuiseok Kang, 2013 .

Modification of Surface Properties for Industrial Ink-jet Printing

Sang-Ho Lee, K. Kang, J. Hwang, 2008, 2008 International Conference on Smart Manufacturing Application.

A study of the gasification of carbon black with molten salt of Li2CO3 and K2CO3 for application in the external anode media of a direct carbon fuel cell

J. Yu, K. Kang, J. Hwang, 2015 .

A Study on Reactions of Carbon-Carbonate Mixture at Elevated Temperature: As an Anode Media of SO-DCFC

J. Yu, K. Kang, J. Hwang, 2014 .

Experimental Study on Fabrication of AZO Transparent Electrode for Organic Solar Cell Using Selective Low-Temperature Atomic Layer Deposition

K. Yoo, Sang-Ho Lee, Heuiseok Kang, 2013 .

Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics

Kangmin Kim, Woochul Kim, Jungho Hwang, 2011 .

Soot and PAH Formation in Counterflow Diffusion Flames of Ethylene-Propane

S. M. Lee, S. Chung, J. Hwang, 2002 .

Tomographic reconstruction of asymmetric soot structure from multi-angular scanning

Sang Min Lee, Jun Young Hwang, Suk Ho Chung, 2004, J. Vis..

Effect of contact angle and drop spacing on the bulging frequency of inkjet-printed silver lines on FC-coated glass

Jun Young Hwang, Kyung-Tae Kang, Heuiseok Kang, 2014 .

A parametric study of the performance of a planar membrane humidifier with a heat and mass exchanger model for design optimization

Kook-Young Ahn, Sangseok Yu, Young-Duk Lee, 2011 .

A scaling law of particle transport in inkjet-printed particle-laden polymeric drops.

G. Chiu, B. Han, Y. Moon, 2022, International journal of heat and mass transfer.

Bulk-like Al/Ag bilayer film due to suppression of surface plasmon resonance for high transparent organic light emitting diodes

Sang-Ho Lee, Heuiseok Kang, K. Kang, 2016 .

Effects of insertion of blunt body on bubble pattern and pumping performance in air-lift pump

C. Sohn, J. Hwang, Seung Hwan Kim, 2018 .

Effects of insertion of blunt body on bubble pattern and pumping performance in air-lift pump

C. Sohn, J. Hwang, Seung Hwan Kim, 2018, Journal of Mechanical Science and Technology.

Inkjet Printing of High Aspect Ratio Silver Lines via Laser-Induced Selective Surface Wetting Technique

S. Moon, Heuiseok Kang, J. Hwang, 2023, Coatings.

Fabrication of organic light emitting display using inkjet printing technology

Jun Young Hwang, Heuiseok Kang, Sang-Ho Lee, 2009, 2009 International Symposium on Optomechatronic Technologies.

Effect of pulse overlapping on temperature field and physical characteristics in pulsed laser sintering of inkjet-printed silver nanoparticles

S. Moon, A. Hussain, Y. Moon, 2023, International Journal of Heat and Mass Transfer.

Temperature Estimation during Pulsed Laser Sintering of Silver Nanoparticles

S. Moon, Heuiseok Kang, Y. Moon, 2022, Applied Sciences.

Effect of laser intensity on the characteristic of inkjet-printed silver nanoparticles during continuous laser sintering.

S. Moon, Jae-Heon Lee, Heuiseok Kang, 2014, Journal of Nanoscience and Nanotechnology.

The characteristic variations of inkjet-printed silver nanoparticle ink during furnace sintering.

S. Moon, J. Hwang, 2013, Journal of Nanoscience and Nanotechnology.

Electrical Property and Surface Morphology of Silver Nanoparticles After Thermal Sintering

S. Moon, Kyongtae Ryu, Y. Moon, 2015, Journal of Electronic Materials.

Analytical alignment for repairing micro patterns on transparent film in roll-to-roll process

Jun Young Hwang, Heuiseok Kang, HyungTae Kim, 2018, 2018 IEEE International Conference on Industrial Technology (ICIT).

Fabrication of a paper-based analytical device for multiple colorimetric analysis via inkjet-printing and paper-cutting

Sang-Ho Lee, Chang-Soo Lee, J. Yu, 2015, BioChip Journal.

Electrical sintering of inkjet-printed silver electrode for c-Si solar cells

Heuiseok Kang, K. Kang, Y. Moon, 2011, 2011 37th IEEE Photovoltaic Specialists Conference.

Periodic fuel supply to a micro-DMFC using a piezoelectric linear actuator

Sang-Ho Lee, Jae-Hyuk Lee, Kwon-Yong Shin, 2010 .

Rapid sintering of copper nano ink using a laser in air

Sang-Ho Lee, J. Yu, Heuiseok Kang, 2014, International Journal of Precision Engineering and Manufacturing.