Yuzo Mori

发表

Photoconductivity of all trans-beta-carotene and all-trans-beta-apo-8'-carotenal crystals

Yuzo Mori, Hideki Hashimoto, Katsunobu Hosokawa, 1995, Other Conferences.

Noncritically phase-matched frequency conversion in GdxY1-xCa4O(BO3)3 crystal

Yuzo Mori, Masashi Yoshimura, Takatomo Sasaki, 1998, Other Conferences.

Figuring of fused silica optical surface with thin parts by plasma chemical vaporization machining

Yuzo Mori, Yasuhisa Sano, Hideo Takino, 2019, Security + Defence.

New nonlinear optical crystals CLBO and YCOB for UV generation

Yuzo Mori, Masashi Yoshimura, Toru Sasaki, 1999, Other Conferences.

Nonlinear optical crystal for near-ultraviolet generation: gadolinium yttrium calcium oxyborate GdxY1-xCa4O(BO3)3

Yuzo Mori, Masashi Yoshimura, Takatomo Sasaki, 1999, Other Conferences.

Ultrahigh-resolution optical coherence tomography imaging of protein crystals using gel inclusion technique

Yuzo Mori, Kazuyoshi Itoh, Norihiko Nishizawa, 2013, Photonics West - Biomedical Optics.

Fabrication technology of hard x-ray aspherical mirror optics and application to nanospectroscopy

Hidekazu Mimura, Yuzo Mori, Akira Saito, 2004, SPIE Optics + Photonics.

Time Variations of Organic Compound Concentrations in a Newly Constructed Cleanroom

Yuzo Mori, Satoshi Ogura, Katsuyoshi Endo, 2001 .

Development of a figure correction method having spatial resolution close to 0.1 mm

Hidekazu Mimura, Yuzo Mori, Akira Saito, 2004, SPIE Optics + Photonics.

Special issue on approach to the technological limits. 1. scale. Atomic order machining.

Yuzo Mori, 1985 .

Microstitching interferometry for nanofocusing mirror optics

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2004, SPIE Optics + Photonics.

Fabrication technology of ultraprecise mirror optics to realize hard x-ray nanobeam

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2004, SPIE Optics + Photonics.

Precision science and technology for perfect surfaces : proceedings of the 9th International Conference on Production Engineering (9th ICPE), Senri Life Science Center, Osaka, Japan, August 29-September 1, 1999

Yuzo Mori, 古川勇二, 古川勇二, 1999 .

Design of a new technique for alleviating thermal dephasing of nonlinear optical crystal

Yuzo Mori, Yoke Khin Yap, Toru Sasaki, 1999, Other Conferences.

Wave-optical and ray-tracing analysis to establish a compact two-dimensional focusing unit using K-B mirror arrangement

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2004, SPIE Optics + Photonics.

Wave-optical analysis of submicron focus of hard x-ray beams by reflective optics

Hidekazu Mimura, Yuzo Mori, Akira Saito, 2002, SPIE Optics + Photonics.

Special issue on globalization. Extreme precision machining techniques.

Yuzo Mori, Kazuto Yamauchi, Katsuyoshi Endo, 1991 .

Development of plasma chemical vaporization machining and elastic emission machining systems for coherent x-ray optics

Hidekazu Mimura, Yuzo Mori, Akira Saito, 2001, SPIE Optics + Photonics.

Method for Machining of Free Formed Surface by Using an Optical Profile NC Machining. (2nd Report). Application for Dental CAD/CAM System.

Yuzo Mori, Yasuhiro Kawahara, Hiroshi Kimura, 1991 .

Aspheric Surface Fabrication in nm-level Accuracy by Numerically Controlled Plasma Chemical Vaporization Machining (CVM) and Elastic Emission Machining (EEM)

Hidekazu Mimura, Yuzo Mori, Akira Saito, 2002, SPIE Optics + Photonics.

Outlook on the Advanced Mechanical Engineering

Mitsuo Umezu, Yuzo Mori, Sueo Matsubara, 1986 .

Influence of fabrication precision on laser beam forming by fabricated optics

Yuzo Mori, Takashi Fujii, Hideo Takino, 1996, Other Conferences.

Hard x-ray nano-focusing at 40nm level using K-B mirror optics for nanoscopy/spectroscopy

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2005, SPIE Optics + Photonics.

Submicron focusing of hard x-ray beam by elliptically figured mirrors for scanning x-ray microscopy

Hidekazu Mimura, Yuzo Mori, Akira Saito, 2002, SPIE Optics + Photonics.

Improvement of thickness uniformity of quartz crystal wafer by numerically controlled plasma CVM

Yuzo Mori, Yasuhisa Sano, Katsuyoshi Endo, 2005, SPIE Optics + Photonics.

Creation of perfect surfaces

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2005 .

The study of fabrication of the x-ray mirror by numerically controlled plasma chemical vaporization machining: Development of the machine for the x-ray mirror fabrication

Yuzo Mori, Yasuhisa Sano, Kazuya Yamamura, 2000 .

Fabrication of elliptically figured mirror for focusing hard x rays to size less than 50 nm

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2005 .

Fabrication of ultrathin and highly uniform silicon on insulator by numerically controlled plasma chemical vaporization machining.

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2007, The Review of scientific instruments.

Image quality improvement in a hard X-ray projection microscope using total reflection mirror optics.

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2004, Journal of synchrotron radiation.

Preparation of ultrasmooth and defect-free 4H-SiC(0001) surfaces by elastic emission machining

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2005 .

Motion Analysis of Fluid and Distribution of Film Thickness

Yuzo Mori, Kazuto Yamauchi, Naoya Ikawa, 1983 .

Nearly diffraction-limited line focusing of a hard-X-ray beam with an elliptically figured mirror.

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2002, Journal of synchrotron radiation.

Development of Plasma CVM(Chemical Vaporization Machining).

Yuzo Mori, Kazuto Yamauchi, Yasuhisa Sano, 2000 .

Characterization of intrinsic amorphous silicon layers for solar cells prepared at extremely high rates by atmospheric pressure plasma chemical vapor deposition

Yuzo Mori, Hiroaki Kakiuchi, Kumayasu Yoshii, 2005 .

Photoyield measurements of CVD diamond

Yuzo Mori, Akio Hiraki, Akimitsu Hatta, 1995 .

Plasma‐CVM (Chemical Vaporization Machining)

Yuzo Mori, Yasuhisa Sano, Kazuya Yamamura, 2004 .

Two-dimensional Submicron Focusing of Hard X-rays by Two Elliptical Mirrors Fabricated by Plasma Chemical Vaporization Machining and Elastic Emission Machining

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2003 .

Atomic-Scale Evaluation of Si ( 111 ) Surfaces Finished by the Planarization Process Utilizing SiO2 Particles Mixed with Water

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2006 .

Evaluation of elastic emission machined surfaces by scanning tunneling microscopy

Yuzo Mori, Kazuto Yamauchi, Hiromichi Toyota, 1990 .

Improvement of the thickness distribution of a quartz crystal wafer by numerically controlled plasma chemical vaporization machining

Yuzo Mori, Yasuhisa Sano, Katsuyoshi Endo, 2005 .

Shape correction of optical surfaces using plasma chemical vaporization machining with a hemispherical tip electrode.

Yuzo Mori, Yasuhisa Sano, Hideo Takino, 2012, Applied optics.

First-principles simulations of removal process in EEM (Elastic Emission Machining)

Yuzo Mori, Kazuto Yamauchi, Yasuhisa Sano, 1999 .

Removal characteristics of plasma chemical vaporization machining with a pipe electrode for optical fabrication.

Yuzo Mori, Yasuhisa Sano, Hideo Takino, 2010, Applied optics.

Ultraprecision Machining Utilizing Numerically Controlled Scanning of Localized Atmospheric Pressure Plasma

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2006 .

Numerically controlled elastic emission machining - Consideration of machining property by motion analysis of powder particle in fluid.

Yuzo Mori, Kazuto Yamauchi, Kazuhisa Sugiyama, 1985 .

Investigation of the Surface Removal Process of Silicon Carbide in Elastic Emission Machining

Hidekazu Mimura, Yuzo Mori, Kazuto Yamauchi, 2007 .

Surface gradient integrated profiler for X-ray and EUV optics

Yuzo Mori, Kazuhiro Enami, Yasuhisa Sano, 2007 .

Thinning of silicon-on-insulator wafers by numerically controlled plasma chemical vaporization machining

Yuzo Mori, Yasuhisa Sano, Kazuya Yamamura, 2004 .

Development of plasma chemical vaporization machining

Yuzo Mori, Kazuto Yamauchi, Yasuhisa Sano, 2000 .