Tarras Wanheim

发表

R. Balendra, K. Chodnikiewicz, Henrik Højborg Gjørtsvang, 1996 .

Review of research into the injection forging of tubular materials

Paulo A.F. Martins, R. Balendra, Tarras Wanheim, 1995 .

Verification of the component accuracy prediction obtained by physical modelling and the elastic simulation of the die/component interaction

Tarras Wanheim, Bjarne Gottlieb Ravn, C. B Andersen, 2001 .

Determination of six stiffnesses for a press

Tarras Wanheim, Morten Eriksen, Mogens Arentoft, 2000 .

Extrusion die design for in-process compensation of component errors

Yi Qin, Rajendram Balendra, Tarras Wanheim, 1996 .

Pressure contours on forming dies

Tarras Wanheim, Bjarne Gottlieb Ravn, C. B Andersen, 2001 .

Preparation machine heads on a shaft such as nails or screws

Tarras Wanheim, Ove Nielsen, Leif Nielsen, 1978 .

A new approach to determine press stiffness

Tarras Wanheim, M. Arentoft, T. Wanheim, 2005 .

MM96.85 Forging of Jet Engine Blades (Reference data): NETTFORM Rapport

W. Libura, W. Presz, Tarras Wanheim, 1996 .

The basis for a design support system to prevent defects in forging

Tarras Wanheim, Mogens Arentoft, 1997 .

Development of a commercial transducer for measuring pressure and friction on a model die surface

Tarras Wanheim, Bjarne Gottlieb Ravn, C. B Andersen, 2001 .

Integration of Engineering Functions/Disciplines in CIM

Leo Alting, Tarras Wanheim, 1986 .

The use of a square grid as an alternative to a circular grid in the determination of strains

Joachim Danckert, Tarras Wanheim, 1979 .

Extrusion die for in-process compensation of component-errors due to die-elasticity

Rajendram Balendra, Yi Qin, Tarras Wanheim, 1997 .

MM97.52 The application of physical modelling

Tarras Wanheim, Mogens Arentoft, Zbigniew Gronostajski, 1997 .

A new transducer for local load measurements of friction and roll pressure in cold flat rolling

Jonas Lagergren, Tarras Wanheim, Poul Henningsen, 2006 .

Deliverable 6.3 Measuring stiffness parameters

Tarras Wanheim, Mogens Arentoft, Bjarne Gottlieb Ravn, 2002 .

Simulation of defects in metal forming - an example

Niels Bay, Tarras Wanheim, Poul Henningsen, 1994 .

Geometrical analysis of 3-D bulk-forming processes by physical simulation

Tarras Wanheim, S. Glibbery, 1990 .

A new concept for the measurement of press stiffness

R. Balendra, K. Chodnikiewicz, Tarras Wanheim, 1994 .

The Simon project

Tarras Wanheim, T. Wanheim, 1985 .

Measurements of Normal and Frictional Forces in a Rolling Process

Tarras Wanheim, Poul Henningsen, Mogens Arentoft, 2004 .

A model for friction in metal forming processes

Niels Bay, Niels Bay, Tarras Wanheim, 1978 .

Deliverable 6.2 An analytical description of press deflections and a new set of stiffness parameters for production presses

Tarras Wanheim, Mogens Arentoft, Bjarne Gottlieb Ravn, 2002 .

What Can We Do About Chip Formation Mechanics

L. De Chiffre, Tarras Wanheim, 1985 .

A theoretically determined model for friction in metal working processes

Niels Bay, Tarras Wanheim, N. Bay, 1974 .

Asperities on asperities

Tarras Wanheim, T. Wanheim, H. Steffensen, 1977 .

The Method for the 3-D Strain and Strain Rate Analyses in Visioplasticity

Tarras Wanheim, F. Yoshida, 1988 .

The influence of the constitutive behaviour of materials on the formability in radial extrusion of tubular components

Tarras Wanheim, Mogens Arentoft, Henrik Bjerregaard, 1998 .

Simulation of cold-forging folding problems using model materials

Tarras Wanheim, J. Harnæs, 1985 .

Development of friction tests for lubrication in model-material experiments

Tarras Wanheim, T. Wanheim, N. Frederiksen, 1985 .

Lubrication Limits in Backward Can Extrusion at Low Reductions

Niels Bay, Tarras Wanheim, V. Maegaard, 1991 .

Strain History Curves and Simulative Materials Testing

Tarras Wanheim, M. Storgaard Nielsen, M. Lindegren, 2000 .

Real area of contact and friction stress — The role of trapped lubricant

Niels Bay, Tarras Wanheim, N. Bay, 1977 .

Bond strength in cold roll bonding

Niels Bay, Tarras Wanheim, N. Bay, 1985 .

Friction at high normal pressures

Tarras Wanheim, T. Wanheim, 1973 .

Combined Physical and Numerical Modelling of Metal Forming Processes

Joachim Danckert, Tarras Wanheim, 1987 .

Modelling and Prediction of Metal Forming

Joachim Danckert, Karl Brian Nielsen, Niels Bay, 1994 .

Physical and mathematical modelling of extrusion processes

Zbigniew Gronostajski, Tarras Wanheim, A. Niechajowicz, 2000 .

Low friction coefficient estimation for model material experiments

Tarras Wanheim, D. C. Fricker, T. Wanheim, 1974 .

Calibration and Industrial Application of Instrument for Surface Mapping based on AFM

Hans Nørgaard Hansen, L. De Chiffre, Tarras Wanheim, 2002 .

Analysis of the Ring Test Method for the Evaluation of Frictional Stresses in Bulk Metal Forming Processes

Joachim Danckert, Tarras Wanheim, T. Wanheim, 1988 .