J. M. Kauffmann

发表

New adjustment method of transformer taps in power flow

Chen Ken, Liu Xiaoqing, J. M. Kauffmann, 1998, POWERCON '98. 1998 International Conference on Power System Technology. Proceedings (Cat. No.98EX151).

Double-fed induction machine: converter optimisation and field oriented control without position sensor

J. M. Kauffmann, L. Morel, H. Godfroid, 1998 .

Study of an electrical differential motor for electrical car

J. M. Kauffmann, O. Crelerot, F. Bernot, 1993 .

EnergyManagement Strategy for EmbeddedFuelCellSystem using FuzzyLogic

Daniel Hissel, Marie-Cécile Péra, J. M. Kauffmann, 2004 .

Robustness of a double fed machine control law to load variation

S. Tnani, J. M. Kauffmann, H. Godfroid, 1999 .

Performance analysis of permanent magnet brushless DC motor

A. Miraoui, J. M. Kauffmann, Lin De Fang, 1993 .

Characteristics analysis of a transverse flux permanent magnet motor using two fast permeance models

A. Miraoui, J. M. Kauffmann, D. Hadjidj, 1999 .

De-synchronized generator using a synchronous turbo-generator and a matrix converter

J. M. Kauffmann, S. Turri, A. Lacaze, 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

Application of a new optimization approach to the design of electrical wheels

Jean Bigeon, Frédéric Wurtz, C. Espanet, 1997 .

Experimental Analysisof a Six Phase Permanent MagnetSynchronous Generator ina VariableSpeed Constant FrequencyGenerating System

M. Y. Ayad, J. M. Kauffmann, E. H. Miliani, 2007 .

Matrix converter with natural commutation

J. M. Kauffmann, S. Turri, A. Lacaze, 2002 .

Sparse Computation of Power System Fault Impedance Matrices

J. M. Kauffmann, M. Belkacemi, A. Mega, 2006 .

Methodological guidelines for the use of analytical and numerical models in a design process of an electromagnetic device

Jean Bigeon, Frédéric Wurtz, Jean-Louis Coulomb, 1998 .

A novel high-power-density hybrid reluctance motor with field concentration for vehicle direct drive

A. Miraoui, J. M. Kauffmann, D. Hadjidj, 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

Field Oriented Control of a Double Fed Asynchronous Machine: Modelling and Implementation.

J. M. Kauffmann, H. Godfroid, L. Morel, 1997 .

Simulation of power system stability by using superconducting magnet energy storage

J. M. Kauffmann, M. Moudjahed, 1996 .

Field oriented control for double fed induction machine : simulation and experimental results

J. M. Kauffmann, A. Mirzaian, L. Morel, 1996 .

Experimental validation of 5 kN model electromagnetic vibration damper and design of a real-size 120 kN machine

A. Berthon, J. M. Kauffmann, F. Bernot, 1998 .

Frequency change control in a de-synchronized generator

J. M. Kauffmann, S. Turri, A. Lacaze, 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

Experimental Analysis of a Six Phase Permanent Magnet Synchronous Generator in a Variable Speed Constant Frequency Generating System

D. Depernet, M. Y. Ayad, J. M. Kauffmann, 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

Fuzzy-logic-based control applied to a hybrid electric vehicle with four separate wheel drives

A. Berthon, J. M. Kauffmann, R. Pusca, 2004 .

Two Area Power Systems Economic Dispatch Problem Solving Considering Transmission Capacity Constraints

R. Kazemzadeh, J. M. Kauffmann, M. Zarei, 2007 .

Coupling of a 4*3 phases active systems via a natural commutated matrix converter

J. M. Kauffmann, R. Kazemzadeh, S. Turri, 2004 .

Thermal management of a PEMFC stack by 3D nodal modeling

R. Glises, J. M. Kauffmann, Hasna Louahlia-Gualous, 2006 .

Design and Validation of a 2 kW‐Fuel Cell Test Bench for Subfreezing Studies

Fabien Harel, J. M. Kauffmann, F. Harel, 2008 .

Thermal modelling for an induction motor

R. Glises, A. Miraoui, J. M. Kauffmann, 1993 .

Experimental Studies on the Influence of Operational Parameters on the Cold Start of a 2 kW Fuel Cell

Fabien Harel, J. M. Kauffmann, F. Harel, 2008 .

Computation of magnetic flux density and iron losses by Fourier-Bessel and Fourier-Laurent series in an electromagnetic vibration damper

J. M. Kauffmann, F. Bernot, M. T. Guichet, 1993 .

Modelling of a transverse Vernier hybrid reluctance motor

A. Miraoui, J. M. Kauffmann, D. Hadjidj, 2000 .

Equivalent Thermal Conductivities for Twisted Flat Windings

R. Glises, J. M. Kauffmann, D. Chamagne, 1996 .

Simplifications of formulas for calculating transmission losses and incremental transmission losses in rectangular coordinate impedance matrix method

Zhang Xiaofeng, J. M. Kauffmann, Chen Ken, 2000 .

Resolution of linear magnetostatic inverse problem using iterative regularization

P. Hiebel, J. M. Kauffmann, J. Kauffmann, 2000 .

Characterisation and modelling of a 5 kW PEMFC for transportation applications

Daniel Hissel, Denis Candusso, Xavier François, 2006 .

D-optimal experimental design applied to a linear magnetostatic inverse problem

P. Hiebel, J. M. Kauffmann, J. Kauffmann, 2002 .