I. Taib

发表

Biomechanical Modeling of Aneurysm Growth and Rupture Using Fluid Structure Interaction

M. M. Mahat, A. Juliawati, I. Taib, 2012 .

Risk of rupture analysis for advanced level of AAA under combined physiological and physical conditions

M. H. Padzillah, K. Osman, M. R. A. Kadir, 2009, 2009 International Conference on Biomedical and Pharmaceutical Engineering.

Evaluation System on Haemodynamic Parameters for Stented Carotid Artery: Stent Pictorial Selection Method

M. F. Mahmod, A. Ismail, A. Arifin, 2019, International Journal of Integrated Engineering.

Secondary flow vortices and flow separation of 2-D turning diffuser via particle image velocimetry

Normayati Nordin, A. Sapit, A. Mohammed, 2017 .

Effect of turning angle on performance of 2-D turning diffuser via Asymptotic Computational Fluid Dynamics

A. Sadikin, Normayati Nordin, A. Sapit, 2017 .

A Short Review on Biodiesel Production and Costing

N. F. Nasir, Normayati Nordin, A. Hariri, 2019 .

Thermal Properties of Polycaprolactone (PCL) Reinforced Montmorillonite (MMT) and Hydroxyapatite (HA) as an Alternate of FDM Composite Filament

Mohd Nasrull Abdol Rahman, M. U. Wahit, R. Haq, 2019 .

Numerical Simulation of Concentration Over-voltage in a Polymer Electrolyte Fuel Cell under Low-Hydrogen Conditions

K. Osman, I. Taib, Takahisa Yamamoto, 2018, International Journal of Integrated Engineering.

Flow behaviour in normal and Meniere’s disease of endolymphatic fluid inside the inner ear

Normayati Nordin, A. Khudzari, N. Darlis, 2017 .

Impact of Excessive Volume of Cerebrospinal Fluid (CSF) Due to Abnormality Morphologies in Brain and Spinal Cord

Siti Nur Mariani Mohd Yunos, Normayati Nordin, A. Arifin, 2019 .

Computational Fluid Dynamics Application in Reducing Complications of Patent Ductus Arteriosus Stenting

A. Khudzari, K. Osman, I. Taib, 2019, Cardiovascular Engineering.

Lumped Parameter Modelling in Femoral Popliteal Artery for Normal and Severe Conditions

A. Ismail, S. Chatpun, R. Haq, 2018, International Journal of Integrated Engineering.

A review of stent’s failure on patent ductus arteriosus

A. Ismail, I. Taib, Bainun Akmal Mohd Atan, 2017 .

Investigate Flow Characteristics of Metered-Dose Inhaler (MDI) Disposable Inhaler Spacer (AeroCup) for COVID-19 Patient by using Computational Fluid Dynamic (CFD)

N. Asmuin, I. Taib, Muhammad Faqhrurrazi Abd Rahman, 2020, CFD Letters.

Response Surface Methodology (RSM) Approach for Optimizing the Actuator Nozzle Design of Pressurized Metered-Dose Inhaler (pMDI)

N. Asmuin, I. Taib, S. Seri, 2021, CFD Letters.

Influence of Actuator Nozzle Angle on the Flow Characteristics in Pressurized-Metered Dose Inhaler Using CFD

Mohamad Nur Hidayat Mat, I. Taib, Riyadhthusollehan Khairulfuaad, 2020, CFD Letters.

Stent Classifications and Effect of Geometries on Stent Behaviour Using Finite Element Method

A. Ismail, M. N. Ibrahim, I. Taib, 2020 .

Computational Analysis on Stent Geometries in Carotid Artery: A Review

A. Ismail, I. Taib, Muhammad Sufyan Amir Paisal, 2018 .

Wall shear stress distributions on stented patent ductus arteriosus

A. Mohammed, K. Osman, I. Taib, 2017 .

Characterization, Thermal and Biological Properties of PCL/PLA/PEG/N-HA Composites

Mohd Fahrul Hassan, Mohd Nasrull Abdol Rahman, R. Haq, 2020 .

Improvement of haemodynamic stent strut configuration for Patent Ductus Arteriosus through computational modelling

Ishkrizat Taib, I. Taib, 2016 .

Finite element analysis for stent in patent ductus arteriosus (PDA)

K. Osman, I. Taib, N. S. Shafii, 2015, 2015 2nd International Conference on Biomedical Engineering (ICoBE).

A review on femoropopliteal arterial deformation during daily lives and nickel-titanium stent properties

I. R. Ali, A. K. Kareem, A. Ismail, 2022, Journal of medical engineering & technology.

Flow Analysis on Fusiform Aneurysm during Exercise Condition

H. Salleh, K. Osman, S. H. Amirnordin, 2012 .

Effect of Filler Loading on Properties of Polyurethane/Clay Composites

R. Haq, A. Arifin, S. Adzila, 2019, IOP Conference Series: Materials Science and Engineering.

An Analysis of Blood Pressure Waveform using Windkessel Model for Normotensive and Hypertensive Conditions in Carotid Artery

A. Ismail, N. Darlis, A. Arifin, 2019 .

Mechanical Properties of PCL/PLA Composite Sample Produced from 3D Printer and Injection Molding

Mohd Fahrul Hassan, Mohd Nasrull Abdol Rahman, R. Haq, 2019, International Journal of Integrated Engineering.

Shape Optimization of High-Speed Rail by Biomimetic

Ishkrizat Taib, Badrul Omar, Chin Toong Foo, 2017 .

Assessment of Turbulence Model Performance Adopted Near Wall Treatment for a Sharp 90° 3-D Turning Diffuser

Zainal Ambri Abdul Karim, Ishkrizat Taib, Yahaya Ramli, 2017, AsiaSim 2017.

Application of Design for Six Sigma (DFSS) In Sustainable Product Design: A Case Study on an Electric Kettle

John Mbogo Kafuku, Salwa Mahmood, Mohd Fahrul Hassan, 2019, IOP Conference Series: Materials Science and Engineering.

Design of a contactless body temperature measurement system using Arduino

Mohd Noor Abdullah, Ishkrizat Taib, M. N. Abdullah, 2020 .

Flow Characteristics Near to Stent Strut Configurations on Femoropopliteal Artery

S. F. S. Adnan, A. Ismail, N. Darlis, 2017 .

Numerical study of flow past a solid sphere at high Reynolds number

A. Sadikin, A. Sapit, A. Mohammed, 2017 .

Reconstruction of 3D Models Using Close-Range Photogrammetry Method for CFD Applications

Mohd Fahrul Hassan, Salwa, M. A. Thomas, 2019 .

A review on fracture prevention of stent in femoropopliteal artery

Zulfaqih Lazim, Al Emran Ismail, Ishkrizat Taib, 2017 .

The Effects of Air Flow in the Wake of a Large Vehicle on Trailing a Passenger Car

Ahmad Jais Alimin, Ishkrizat Taib, Shahrin Hisham Amirnordin, 2010 .

Computational fluid dynamics simulation of pressure and velocity distribution inside Meniere’s diseased vestibular system

A. Mohammed, I. Taib, N. F. Shamsuddin, 2017 .

Pulsatile flow simulation of patent ductus arteriosus to evaluate thrombosis factors on closure device

A. Khudzari, K. Osman, I. Taib, 2017 .