H. Saghafian

发表

The homogenizing of carbon nanotube dispersion in aluminium matrix nanocomposite using flake powder metallurgy and ball milling methods

H. Saghafian, S. Shabestari, F. Rikhtegar, 2015 .

Development of visible light activated TiO 2 thin films on stainless steel via sol spraying with emphasis on microstructural evolution and photocatalytic activity

F. Golestani-Fard, H. Saghafian, M. Momeni, 2015 .

Microstructural evolution of A380 aluminum alloy produced by gas-induced semi-solid technique (GISS)

H. Saghafian, S. Shabestari, H. Saghafian, 2015 .

Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods

H. Saghafian, S. Shabestari, F. Rikhtegar, 2017 .

The Effect of Laser Surface Compositing Using Nd : YAG Pulsed Laser with TiC Particles On Tribological behavior of H 13 Tool Steel

S. Kheirandish, H. Saghafian, Reza Soleimani Gilakjan, 2018 .

Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy

S. Shabestari, M. Ghoncheh, H. Saghafian, 2017 .

Effect of SiO 2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO 2 thin films applied on stainless steel by a sol gel method

F. Golestani-Fard, H. Saghafian, M. Momeni, 2017 .

Effect of electrodeposition conditions on the properties of Cu-Si3N4 composite coatings

M. Eslami, F. Golestani-Fard, H. Saghafian, 2014 .

Sliding wear behavior of a ferritic–pearlitic ductile cast iron with different nodule count

S. Kheirandish, Hamid Reza Abedi, H. Saghafian, 2010 .

Investigation on microstructure of Al–25 wt-%Mg2Si composite produced by slope casting and semi-solid forming

S. Shabestari, M. Ghoncheh, H. Saghafian, 2015 .

Wear Behavior of Thixoformed Al-25 wt% Mg2Si Composites Produced by Slope Casting Method

S. Shabestari, M. Ghoncheh, H. Saghafian, 2015 .

Study on tribological behavior of electrodeposited Cu–Si3N4 composite coatings

M. Eslami, F. Golestani-Fard, H. Saghafian, 2014 .

Effect of Bainite Morphology on Mechanical Properties of the Mixed Bainite-martensite Microstructure in D6AC Steel

H. Saghafian, S. Kheirandish, H. Saghafian, 2012 .

EFFECT OF AUSTEMPERING TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF D6AC STEEL

S. Kheirandish, H. Saghafian, khodamorad abbaszadeh, 2011 .

Thermochemical synthesis of nanostructured Cu-Al2O3 composite powder

Z. Seyedraoufi, S. Shabestari, H. Saghafian, 2014 .

Effect of Ablation Casting on the Microstructural Parameters and Tensile Properties of Aluminum Matrix Composite Reinforced by SiC Particles

H. Saghafian, S. M. A. Boutorabi, Mostafa Arabpour, 2022, Metallography, Microstructure, and Analysis.

Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy

H. Saghafian, F. Taghavi, Y. Kharrazi, 2009 .

Microstructural Evaluation of Semi-Solid and Thixoformed Parts of LM28 Aluminum Alloy

S. Shabestari, H. Saghafian, P. Ghaemmaghami, 2012 .

Studying the Wear Behavior of applied coats on Titanium by Chromium Electroplating and Plasma Nitriding Processes

H. Aghajani, H. Saghafian, A. T. Tabrizi, 2021 .

Correction of Archard equation for wear behavior of modified pure titanium

H. Aghajani, H. Saghafian, A. T. Tabrizi, 2020 .

Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon contents

A. Nouri, S. Kheirandish, H. Saghafian, 2010 .

Mild Oxidative Wear Behaviour of Plain Carbon Dual‐Phase Steel

S. Kheirandish, H. Saghafian, V. Abouei, 2007 .

Dry Sliding Oxidative Wear in Plain Carbon Dual Phase Steel

S. Kheirandish, H. Saghafian, V. Abouei, 2007 .

Effects of austempering and martempering processes on amount of retained austenite in Cr-Mo steels (FMU-226) used in mill liner

M. Shaeri, S. Shabestari, H. Saghafian, 2010 .

Effect of austempering process on microstructure and wear behavior of ductile iron containing Mn-Ni-Cu-Mo

H. Saghafian, HaMiD PourAsiabi, Hamed Pourasiabi, 2013, Metals and Materials International.

Effects of heat treatment on mechanical properties of modified cast AISI D3 tool steel

S. Kheirandish, H. Saghafian, M. Momeni, 2014 .

Effect of Heat Treatment on Microstructure of Modified Cast AISI D3 Cold Work Tool Steel

S. Kheirandish, H. Saghafian, Shahram Kheirandish, 2010 .

Study of the effects of lower bainite volume fraction on tensile and impact properties of D6AC medium carbon low alloy ultrahigh strength steel

S. Kheirandish, H. Saghafian, K. abbaszadeh, 2019 .

Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy

H. Saghafian, H. Saghafian, F. Taghavi, 2009 .

EFFECT OF SILICON CONTENT ON THE STRAIN HARDENING OF DUAL-PHASE STEELS

A. Nouri, H. Saghafian, 2008 .

Ablation Casting of High-Aluminum Ductile Cast Iron (Fe-C-Al-Mg)

S. Boutorabi, H. Saghafian, A. Fazeli, 2022, International Journal of Metalcasting.

Effect of Casting Thickness on the Solidification Characteristics and Microstructural Parameters of Near-Eutectic Al-Si Alloy Produced by Ablation Casting Process

H. Saghafian, Mostafa Arabpour, S. Boutorabi, 2022, Metallography, Microstructure, and Analysis.

EVALUATION OF THE MECHANICAL PROPERTIES OF NIOBIUM MODIFIED CAST AISI H 13 HOT WORK TOOL STEEL

S. Kheirandish, A. Noorian, H. Saghafian, 2010 .

Impact strength and structural refinement of A380 aluminum alloy produced through gas-induced semi-solid process and Sr addition

S. Shabestari, H. Saghafian, M. Honarmand, 2022, Transactions of Nonferrous Metals Society of China.

Synthesis of Carbon Nanotube-Reinforced Al2024 Matrix Nanocomposite Using Flake Powder Metallurgy Method

S. Shabestari, F. Rikhtegar, H. Saghafian, 2016, Metallurgical and Materials Transactions A.