S. Moon

发表

Robust saturation controller for linear time-invariant system with structured real parameter uncertainties

Seok-Jun Moon, Chae-Wook Lim, Young-Jin Park, 2006 .

A Study on the Hybrid Mount against Vibration and Shock for Naval Ships

Seung-Bok Choi, Woo-Jin Jung, Yong-Jin Ji, 2010 .

Experimental Review on Dynamic Characteristics of the Commercial Mounts for Vibration Reduction

Seok-Jun Moon, Yun-Ho Shin, Jung-Hoon Chung, 2014 .

Development of Hybrid Vibration Isolator by Inertial-Type Actuator and Wire Mesh Mount

Jeung-Hoon Lee, S. Moon, Yun-ho Shin, 2019, IEEE/ASME Transactions on Mechatronics.

A Mathematical Model for a Non-Linear Pneumatic Actuation System to Control Dynamic Pressure

S. Moon, Yun-ho Shin, 2018 .

A new mount with moving-magnet type electromagnetic actuator for naval shipboard equipment

Woo-Jin Jung, Jae-Jin Jeon, Yun-Ho Shin, 2015 .

An inertia-type hybrid mount combining a rubber mount and a piezostack actuator for naval shipboard equipment

Seung-Bok Choi, Seok-Jun Moon, Jong-Seok Oh, 2013 .

Development of hybrid type pneumatic vibration isolation table by piezo-stack actuator and filtered-X LMS algorithm

Hyung-Jo Jung, Seok-Jun Moon, Yun-Ho Shin, 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Damage detection in beams using vibratory power estimated from the measured accelerations

Hyun Gwon Kil, Jae Kwan Kim, Young Cheol Huh, 2011 .

A piezostack-based active mount for broadband frequency vibration control: experimental validation

Seung-Bok Choi, Jung Woo Sohn, Sang-Min Choi, 2009 .

Sliding mode control of a vibrating system using a hybrid active mount

V-Q Nguyen, S-B Choi, S-M Choi, 2009 .

The design of a piezostack-based active mount and application to a vibration control system

Seung-Bok Choi, Young-Min Han, Sang-Min Choi, 2008 .

Experimental Investigation of MR Damper-based Semiactive Control Algorithms for Full-scale Five-story Steel Frame Building

Hyung-Jo Jung, Heon-Jae Lee, Sung-Kyung Lee, 2010 .

A Study on Conceptual Design of Anti-rolling Devices for 250 TEU Class Mobile Harbors

Seok-Jun Moon, Tae-Young Chung, J. M. Lew, 2010 .

Active Vibration Control of Structure Using LMI Optimization Design of Robust Saturation Controller

Youngjin Park, Seok-Jun Moon, Chae-Wook Lim, 2006 .

Vibration Control of Scanning Electron Microscopes with Experimental Approaches for Performance Enhancement

Seok-Jun Moon, Yong-Ju Kim, Ki-Yong Oh, 2020, Sensors.

Derivation of 4 degrees of freedom nonlinear wind turbine model using effective mass and stiffness for simulation of control algorithm

Seok-Jun Moon, Yun-Ho Shin, Jeong-Il Kwon, 2013 .

Assessment on shock pressure acquisition from underwater explosion using uncertainty of measurement

Seok-Jun Moon, Jeong-Il Kwon, Jin-Woo Park, 2017 .

Experimental Approach to Active Mounts Using Electromagnetic Actuator and Rubber with Consideration of Shock Resistance for Naval Shipboard Equipment

Woo-Jin Jung, Yun-Ho Shin, Soo-Ryong Bae, 2019, Shock and Vibration.

Phase II Benchmark Control Problem for Seismic Response of Cable-Stayed Bridges

Shirley J. Dyke, Lawrence A. Bergman, Juan M. Caicedo, 2003 .

A novel triple-actuating mechanism of an active air mount for vibration control of precision manufacturing machines: experimental work

Seung-Bok Choi, Cheol-Ho Kim, HyungTae Kim, 2014 .

Feasibility study on a hybrid mount system with air springs and piezo-stack actuators for microvibration control

Hyung-Jo Jung, Yun-Ho Shin, Jungkeun Oh, 2012 .

Structural vibration control using linear magnetostrictive actuators

Young-Jin Park, Seok-Jun Moon, Chae-Wook Lim, 2007 .

Vibration control of a beam using linear magnetostrictive actuators

Chae-Wook Lim, Byung-Hyun Kim, Seok-Jun Moon, 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.