P. Sai

发表

A Model for Residence Time Distribution of Solids in a Rotary Kiln

L. Dinesh, P. Sai, 2008 .

Kinetics and modeling of charge transfer polymerization of methyl methacrylate

R. Vijayaraghavan, K. Raghavan, P. G. Rao, 2009 .

Studies on segregation of binary mixture of solids in a continuous fast fluidized bed: Part I. Effect of particle density

K. G. Palappan, P. Sai, 2008 .

Heterogeneous azeotropic distillation for the separation of n-propanol + water mixture using n-propyl acetate as entrainer

A. R. Balakrishnan, P. Sai, V. Devi, 2017 .

Experimental studies and thermodynamic analysis of isobaric vapor-liquid-liquid equilibria of 2-propanol + water system using n-propyl acetate and isopropyl acetate as entrainers

A. R. Balakrishnan, P. Sai, V. Devi, 2017 .

Drying of Solids in a Rotary Dryer

P. S. T. Sai, P. Sai, 2013 .

Continuous segregation of homogeneous binary mixture of solids by a liquid fluidised bed classifier

P. Sai, S. Narasimha Reddy, 2020, Indian Chemical Engineer.

Continuous segregation of binary mixture of solids in liquid fluidised beds: influence of feed entry location

P. Sai, S. Narasimha Reddy, 2018, Indian Chemical Engineer.

Flow pattern of the phases and liquid saturation in gas‐liquid concurrent downflow through packed beds

Y. Varma, P. Sai, 1988 .

Kinetics of Esterification of Acetic Acid and Ethanol with a Homogeneous Acid Catalyst

P. Sai, C. Beula, P. Sai, 2015 .

Axial Solids Holdup Distribution in a Liquid–Solid Circulating Fluidized Bed: Effect of the Liquid Distributor, Method of Operation, and Viscosity of the Fluidizing Media

Vidyasagar Shilapuram, P. Sai, 2012 .

Fixed bed adsorption of fluoride by Artocarpus hirsutus based adsorbent

K. Gnanasekar, P. Sai, P. Dhanasekaran, 2017 .

PREPARATION OF ACTIVATED CARBON FROM PALM OIL SHELL BY CHEMICAL ACTIVATION WITH Na 2CO 3 AND ZnCl 2 AS IMPRENATED AGENTS FOR H 2 S ADSORPTION

P. Sai, 2014 .

Arsenic removal from groundwater by Anjili tree sawdust impregnated with ferric hydroxide and activated alumina

C. Babu, R. Prabhu, P. Sai, 2016 .

Study of Ionic Liquids as Entrainers for the Separation of Methyl Acetate–Methanol and Ethyl Acetate–Ethanol Systems Using the COSMO-RS Model

A. R. Balakrishnan, P. Sai, J. Dhanalakshmi, 2013 .

Screening of ionic liquids as entrainers for the separation of 1-propanol + water and 2-propanol + water mixtures using COSMO-RS model

A. R. Balakrishnan, P. Sai, V. K. P. Janakey Devi, 2018 .

Defluoridation of water by chemical impregnated Artocarpus hirsutus sawdust

C. Anandbabu, P. Sai, P. Dhanasekaran, 2016 .

Effect of C/N ratio on denitrification of high-strength nitrate wastewater in anoxic granular sludge sequencing batch reactors

Y. Nancharaiah, T. Mohan, P. Sai, 2016 .

Experimental studies and model validation for the optimization of electrodes configuration in a molten salt electrorefiner

P. Venkatesh, P. Sai, B. Srihari, 2016 .

Production of Activated Carbon from Coconut Shell Char in a Fluidized Bed Reactor

K. Krishnaiah, P. Sai, J. Ahmed, 1997 .

Denitrification of high strength nitrate bearing acidic waters in granular sludge sequencing batch reactors

Y. Nancharaiah, T. Mohan, P. Sai, 2017 .

Estimation of liquid phase mixing due to solids in a turbulent bed contactor

K. Krishnaiah, P. Sai, A. Bruce, 2006 .

Liquid phase mixing in turbulent bed contactor

K. Krishnaiah, P. Sai, A. Bruce, 2003 .

Effect of bivalent cation inorganic salts on isobaric vapor–liquid equilibrium of methyl acetate–methanol system

A. R. Balakrishnan, P. Sai, J. Dhanalakshmi, 2014 .

Effect of Inorganic Salts on the Isobaric Vapor–Liquid Equilibrium of the Ethyl Acetate–Ethanol System

A. R. Balakrishnan, P. Sai, J. Dhanalakshmi, 2013 .

Influence of Feed Entry on the Segregation of a Binary Mixture of Solids in a Continuous Fast Fluidized Bed

K. G. Palappan, P. Sai, 2011 .

Enrichment of titanium dioxide in red mud: a kinetic study

P. Sai, Pankaj K Kasliwal, 1999 .

Experimental Investigation and Numerical Modeling of a Joule-Heated Ceramic Melter for Vitrification of Radioactive Waste

P. Sai, C. Kaushik, J. Gayen, 2019, Journal of Hazardous, Toxic, and Radioactive Waste.

Esterification of ethanol with sulfuric acid: A kinetic study

P. Sai, S. Theodore, 2001 .

Pressure drop in gas‐liquid downflow through packed beds

P. S. T. Sai, Y. Varma, Y. B. G. Varma, 1987 .

Studies on segregation of binary mixture of solids in a continuous fast-fluidized bed. Part IV. Total solids holdup, axial solids holdup and axial solids concentration

K. G. Palappan, P. Sai, 2010 .

Studies on segregation of binary mixture of solids in continuous fast fluidized bed: Part III. Quantification of performance of the segregator

K. G. Palappan, P. Sai, 2008 .

Prediction of axial velocity profiles and solids hold‐up in a rotary kiln

A. D. Damodaran, G. D. Surender, P. Sai, 1992 .

Numerical simulation of the hydrodynamics of a liquid solid circulating fluidized bed

Sreenivas Jayanti, S. Roy, P.S.T. Sai, 2014 .

Modelling of hydrodynamics in a type I turbulent bed contactor

K. Krishnaiah, P. Sai, R. Balasubramanian, 2006 .

Liquid holdup in turbulent bed contactor

K. Krishnaiah, P. Sai, A. Bruce, 2004 .

Hydrodynamics and flow regimes in turbulent bed contactor with non‐Newtonian liquids

K. Krishnaiah, P. Sai, P. Swathi, 2012 .

Flow Regime Maps for Flow of Liquid Through Downcomer in a Turbulent Bed Contactor

K. Krishnaiah, P. Sai, A. Bruce, 2008 .

Characterization of liquid phase mixing in turbulent bed contactor through RTD studies

K. Krishnaiah, P. Sai, A. Bruce, 2004 .

Mathematical modeling of pneumatic char injection in a direct reduction rotary kiln

V. Ramakrishnan, V. Ramakrishnan, P. S. T. Sai, 1999 .

Comparison of macroscopic flow properties obtained by three methods of operation in a liquid–solid circulating fluidized bed

Vidyasagar Shilapuram, K. Krishnaiah, P. Sai, 2009 .

Hydrodynamics of a liquid–solid circulating fluidized bed: Effect of dynamic leak

K. Krishnaiah, P. Sai, S. Vidyasagar, 2008 .