Zhihong Li

发表

Effect of diamond additive on the properties of cBN composites with Al–Si as binder by HTHP sintering

Weiqi Wang, Zhihong Li, Yumei Zhu, 2022, Ceramics International.

Preparation and characterization of glass foams for artificial floating island from waste glass and Li2CO3

Tao Yang, Zhihong Li, Yumei Zhu, 2017 .

Effect of KNO3 on the microstruture and physical properties of glass foam from solid waste glass and SiC powder

B. Zhang, Xiangke Wang, Zhihong Li, 2016 .

Effect of PMMA pore former on microstructure and mechanical properties of vitrified bond CBN grinding wheels

Zhihong Li, Yumei Zhu, Xingfen Lv, 2013 .

Composition, microstructure and mechanical properties of cBN-based composites sintered with AlN- Al- Ni binder

H. Ji, Kun Sun, Zhihong Li, 2018, Ceramics International.

Enhancing microwave absorption by constructing core/shell TiN@TiO2 heterostructures through post-oxidation annealing

Xianwei Meng, Zhihong Li, Shiduo Liu, 2019 .

Influence investigation of CaF2 on the LAS based glass-ceramics and the glass-ceramic/diamond composites

Zhihong Li, Yumei Zhu, D. Feng, 2016 .

Ag3PO4@holmium phosphate core@shell composites with enhanced photocatalytic activity

Chen Chen, Yi Shen, Mingxi Zhang, 2017 .

Fabrication and evaluation of mechanical properties of polycrystalline diamond reinforced with carbon-nanotubes by HPHT sintering

Zhihong Li, Yumei Zhu, Zilin Jiang, 2020 .

A Widely Applicable Strategy for Coffee‐Ring Effect Suppression and Controllable Deposition of Nanoparticles Utilizing Ice Drying

Enqi He, Dan Guo, Zhihong Li, 2019, Advanced Materials Interfaces.

Enhanced mechanical properties of cBN-Al-Si3N4 composites by introducing diamond

Zhihong Li, Yumei Zhu, Xingyuan Wei, 2022, Diamond and Related Materials.

Performance evaluation of cBN-Ti3AlC2–Al composites fabricated by HTHP method

Zhihong Li, Yumei Zhu, Zilin Jiang, 2020 .

Effects of SiC whiskers on performances of cBN-SiCp-Al composites sintered by HTHP

Xing Wei, Kun Sun, Zhihong Li, 2020 .

Controlled synthesis of highly orientation-ordered single crystal Cd1−xZnxS nanorod array

X. Lv, Xiaofei Zeng, Zhihong Li, 2014 .

Photoluminescence Studies of Both the Neutral and Negatively Charged Nitrogen-Vacancy Center in Diamond

J. Steeds, Zhihong Li, Kaiyue Wang, 2016, Microscopy and Microanalysis.

Predicted structural evolution and detailed insight into configuration correlation, mechanical properties of silicon–boron binary compounds

Bo Zhang, Lailei Wu, Zhihong Li, 2017 .

Surface modification of silicon carbide with silane coupling agent and hexadecyl iodiele

Zhihong Li, Yumei Zhu, Shang Xujing, 2017 .

Effect of transition metal carbides on mechanical properties of polycrystalline diamond by HPHT sintering

P. Huang, Zhihong Li, Yumei Zhu, 2022, Ceramics International.

Effect of controllable decomposition of MAX phase (Ti3SiC2) on mechanical properties of rapidly sintered polycrystalline diamond by HPHT

H. Ji, Kun Sun, Zhihong Li, 2019, Ceramics International.

Effect of SiC whiskers on mechanical properties of thermally stable polycrystalline diamond prepared by HPHT sintering

H. Ji, Kun Sun, Zhihong Li, 2018, Diamond and Related Materials.

Twin Structure in BiVO4 Photoanodes Boosting Water Oxidation Performance through Enhanced Charge Separation and Transport

Changli Li, Li Zhang, Hongwei Zhu, 2018, Advanced Energy Materials.

Structural characterization and magnetic property of iron-platinum nanoparticles fabricated by pulse electrodeposition

Chunling Du, Xueyan Du, Zhihong Li, 2012, Rare Metals.

Effect of Si/Ti additive on the preparation and properties of cBN-diamond composite sintered by high-temperature and high-pressure

H. Ji, Kun Sun, Zhihong Li, 2019, Diamond and Related Materials.

Effect of MgO–TiO2–SiO2 additions on in-situ anisotropic grains growth and mechanical properties of corundum abrasive using pseudo-boehmite as raw material

Zhihong Li, Yumei Zhu, Yang Han, 2020 .

A novel low temperature synthesis technique of sol–gel derived nanocrystalline alumina abrasive

Zhihong Li, Yumei Zhu, Zicheng Li, 2011 .

Synthesis and two-step sintering behavior of sol–gel derived nanocrystalline corundum abrasives

Zhihong Li, Yumei Zhu, Zicheng Li, 2009 .

A thermochemical approach to enhance hydrophobicity of SiC/SiO 2 powder using γ-methacryloxypropyl trimethoxy silane and octylphenol polyoxyethylene ether (7)

Xiangke Wang, Zhihong Li, Yumei Zhu, 2016 .

Preparation and Characterization of Sulfated Cellulose Nanocrystalline and its Composite Membrane for Removal of Tetracycline Hydrochloride in Water

Jie Liu, Shisheng Liu, M. Guo, 2019, ENERGY & ENVIRONMENTAL MATERIALS.

Preparation of sol-gel derived microcrystalline corundum abrasives with hexagonal platelets

K. Gao, Zhihong Li, Yumei Zhu, 2013, International Journal of Minerals, Metallurgy, and Materials.

Synergistic effect of α-Al2O3 and (NH4)3AlF6 co-doped seed on phase transformation, microstructure, and mechanical properties of nanocrystalline alumina abrasive

Zhihong Li, Yumei Zhu, Zicheng Li, 2009 .

Synthesis Processes of Nano Alumina Abrasive

Y. M. Zhu, Zhihong Li, Zicheng Li, 2008 .

Synthesis and two-step sintering behavior of solution derived corundum abrasives with plate-like grains

Tao Yang, Zhihong Li, D. Feng, 2018, Ceramics International.

Effect of TiO2–SiO2 on microstructure and mechanical characteristics of zirconium corundum abrasives by sol-gel method

Jinsong Wang, Kun Sun, Zhihong Li, 2019, Journal of Alloys and Compounds.

Effect of ZnF2–TiO2–SiO2 additions on the two-step sintering behavior and mechanical properties of sol–gel derived corundum abrasive

Zhihong Li, Yumei Zhu, D. Hu, 2016 .

Effect of CuO–TiO2–SiO2 additions on the sintering behavior and mechanical properties of corundum abrasive synthesized through sol–gel method

M. Luo, Zhihong Li, Yumei Zhu, 2013 .

Influence of thermal treatment conditions on two-dimensional crystal growth of nanocrystal corundum abrasives

Zhihong Li, Yumei Zhu, Zicheng Li, 2009 .

Influence of diamond particle size on the thermal and mechanical properties of glass-diamond composites

H. Ji, Zhihong Li, Yumei Zhu, 2018 .

Effects of Cu on properties of vitrified bond and vitrified CBN composites

C. Zhai, Pengfei Wang, Weijie Wu, 2015 .

Effect of mullite particles on the mechanical strength and chemical durability of vitrified CBN composites

Baohui Zhao, Zhihong Li, Yumei Zhu, 2013 .

Effect of polycrystalline mullite fibers on the properties of vitrified bond and vitrified CBN composites

Baohui Zhao, Zhihong Li, Yumei Zhu, 2013 .

Influence of TiO2 on the physical properties of low-temperature ceramic vitrified bond and mechanical properties of CBN composites

Yanyan Yu, K. Gao, Zhihong Li, 2012 .

Effects of different Ti-doping methods on the structure of pure-silica MCM-41 mesoporous materials

Zhihong Li, Yumei Zhu, Yiheng Shen, 2008 .

Crystal structure and luminescent property of flaky-shaped Sr4Al14O25:Eu2+, Dy3+ phosphor doped with Er3+ ions

Xiaomin Wang, Yi Shen, Mingxi Zhang, 2017 .

Bismaleimide Modified by Allyl Novolak for Superabrasives

Zhihong Li, Yumei Zhu, Hongfei Zheng, 2007 .

Two-step sintering behavior of sol–gel derived nanocrystalline corundum abrasive with MgO–CaO–SiO2 additions

Zhihong Li, Yumei Zhu, Zicheng Li, 2008 .

Synthesis of Zn0.2Ca0.8TiO3:Pr3+ via electrochemical assembly on ZSM-5 and its luminescent properties

Xiaomin Wang, Y. Meng, Yi Shen, 2015 .

Ag3PO4@LaPO4 core–shell composite with high photocatalytic activity

Xiaomin Wang, Chen Chen, Yi Shen, 2017 .

Fabrication and properties of silica/mullite porous ceramic by foam-gelcasting process using silicon kerf waste as raw material

Zhihong Li, Yumei Zhu, Yuxin Liang, 2020 .

Porous silica/mullite ceramics prepared by foam-gelcasting using silicon kerf waste as raw material

Zhihong Li, Yumei Zhu, Lingjie Zhou, 2019, Materials Letters.

The effect of graphene oxide on the mechanical properties of cBN composites fabricated by HTHP method

H. Ji, Kun Sun, Zhihong Li, 2020, Diamond and Related Materials.

Performance investigation of Li2O–Al2O3–4SiO2 based glass–ceramics with B2O3, Na3AlF6 and Na2O fluxes

Zhihong Li, Yumei Zhu, Qingbin Zhang, 2012 .

Structural and mechanical properties of cBN composites by regulating particle size distribution and holding time

H. Ji, Zhihong Li, Min Liu, 2021 .

Effect of Y2O3 additive on properties of cBN composites with Si3N4–Al2O3–Al as binder by high temperature and high pressure sintering

H. Ji, Kun Sun, Zhihong Li, 2019, Ceramics International.

Mechanical property enhancement of cubic boron nitride composites through additive diamond

H. Ji, Kun Sun, Zhihong Li, 2019, Diamond and Related Materials.

Preparation and characterization of SiO2–Al2O3–Na2O glass coated cBN abrasive particles via sol–gel route

Zhihong Li, Yumei Zhu, Zicheng Li, 2008 .

Assessment of the performance of TiB2 nanoparticles doped cBN-TiN-Al-Co composites by high temperature high pressure sintering

H. Ji, Kun Sun, Zhihong Li, 2019, Materials Chemistry and Physics.

Controllable HTHP sintering and property of cBN/diamond composites containing Ti3SiC2

H. Ji, Zhihong Li, Yumei Zhu, 2020 .

Effects of Two Different Cyclic Heat Treatments on Microstructure and Mechanical Properties of Ti-V Microalloyed Steel

M. Gao, X. Ren, Zhihong Li, 2015 .

Mechanical and X-band electromagnetic properties of vitrified bonded SiC composite ceramics

Tao Yang, Zhihong Li, Qie Li, 2017, Journal of Materials Science.

Mechanical and X-band dielectric properties of vitrified bonded SiC composites

H. Tan, Zhihong Li, Yumei Zhu, 2016 .

Effects of AlN on the thermal and mechanical properties of vitrified bond and vitrified CBN composites

Weijie Wu, Zhihong Li, Yumei Zhu, 2014 .

Structural evolution, mechanical properties, and electronic structure of Al–Mg–Si compounds from first principles

H. Gou, Lailei Wu, Zhihong Li, 2015, Journal of Materials Science.

Combined Electron and Structure Manipulation on Fe-Containing N-Doped Carbon Nanotubes To Boost Bifunctional Oxygen Electrocatalysis.

Qichen Wang, Y. Lei, C. Deng, 2018, ACS applied materials & interfaces.

Effect of CaO on the surface morphology and strength of water soaked Na2O–B2O3–Al2O3–SiO2 vitrified bond

Pengfei Wang, Zhihong Li, Yumei Zhu, 2008 .

Afterglow photocatalysis of Ag3PO4 through different afterglow coatings and photocatalysis mechanism

Yi Shen, Zhihong Li, Fengfeng Li, 2017 .

Li-ion conductivity and stability of hot-pressed LiTa2PO8 solid electrolyte for all-solid-state batteries

Yutao Li, Biyi Xu, Bing Huang, 2020, Journal of Materials Science.

Annealing and lateral migration of defects in IIa diamond created by near-threshold electron irradiation

J. Steeds, Zhihong Li, Hongxing Wang, 2017 .

Photoluminescence studies of 515.8 nm, 533.5 nm and 580 nm centres in electron irradiated type IIa diamond

J. Steeds, Zhihong Li, Kaiyue Wang, 2012 .

Effect of Y2O3 on the properties of vitrified bond and vitrified diamond composites

C. Zhai, Zhihong Li, Yumei Zhu, 2014 .

Preparation and Characterization of Carbide Particle-Toughened Si–B System of High Thermostability Polycrystalline Diamond by HPHT Sintering

Yunqi Zhang, Zhihong Li, Yumei Zhu, 2023, Materials.

Effect of CoO–NiO additives on the microstructure and mechanical properties of microcrystalline corundum abrasives with in-situ formed needle-shaped LaAl11O18

Xueling Li, Zhihong Li, Yumei Zhu, 2022, Ceramics International.

Effect of CaO-TiO2-SiO2 on the Microstructure and Mechanical Properties of Ceramic Corundum Abrasives

Zhihong Li, Yumei Zhu, Quanbao Zhao, 2023, Inorganics.

Photoluminescence studies of growth-sector dependence of nitrogen distribution in synthetic Ib diamond

J. Steeds, Zhihong Li, Kaiyue Wang, 2014 .

Photoluminescence studies of the 523.7nm optical centre in HPHT synthetic diamond

J. Steeds, Zhihong Li, Kaiyue Wang, 2012 .

Synthesis and structure of α-Al2O3 with a truncated rhombohedron grain morphology

Tao Yang, Zhihong Li, Qie Li, 2017, Journal of Sol-Gel Science and Technology.

Preparation and cutting performance study of YSZ-toughened PcBN superhard tools

Zhihong Li, Yumei Zhu, Yuxiao Yue, 2023, RSC advances.

Raw materials selection applied to glass bonding for vitrified CBN grinding wheels

Zhihong Li, Yumei Zhu, Zicheng Li, 2008, Journal of Materials Science.

Effect of Bi2O3 on physical properties of vitrified bond and mechanical properties of diamondcomposites

Zhihong Li, Yumei Zhu, Xingfen Lv, 2013 .

Surface Coating on a Separator with a Reductive Solid Li-Ion Conductor for Dendrite-Free Li-Metal Batteries

Yutao Li, Biyi Xu, Zhihong Li, 2021, ACS Applied Energy Materials.

Comparison of Cu and Zn on properties of vitrified diamond composites

H. Tan, Zhihong Li, Yumei Zhu, 2016 .

Combined Electron and Structure Manipulation on Fe-Containing N-Doped Carbon Nanotubes To Boost Bifunctional Oxygen Electrocatalysis.

Qichen Wang, Y. Lei, C. Deng, 2018, ACS applied materials & interfaces.

Comparison of rare earth oxides on properties of vitrified diamond composites

Tao Yang, Zhihong Li, Qie Li, 2017 .