I. Landman

发表

Principal physics developments evaluated in the ITER design review

Massimiliano Mattei, D. A. Humphreys, E. J. Strait, 2009 .

Experimental validation of 3D simulations of tungsten melt erosion under ITER-like transient loads

A. Loarte, M. Merola, J. Linke, 2009 .

DROPLET FORMATION AT THE W-MACROBRUSH TARGETS UNDER TRANSIENT EVENTS IN ITER

B. Bazylev, I. Landman, 2007 .

Simulation of residual thermostress in tungsten after repetitive ELM-like heat loads

I. Garkusha, S. Pestchanyi, I. Landman, 2011 .

Erosion of tungsten armor after multiple intense transient events in ITER

G. Janeschitz, B. Bazylev, S. Pestchanyi, 2005 .

Macroscopic erosion of divertor and first wall armour in future tokamaks

V. Safronov, H. Würz, B. Bazylev, 2002 .

Lateral deflection of the SOL plasma during a giant ELM

I. Landman, H. Wuerz, 2001 .

Development of an advanced magnetic equilibrium model for fusion reactor system codes

S. Pestchanyi, F. Franza, I. Landman, 2018, Fusion Engineering and Design.

Modelling of massive gas injection for ITER disruption mitigation

Y. Igitkhanov, R. Pitts, S. Pestchanyi, 2013 .

Analysis of energy cross-transport during MGI: JET experiments and TOKES simulations

Y. Igitkhanov, M. Lehnen, A. Huber, 2013 .

Verification of TOKES simulations against the MGI experiments in JET

M. Lehnen, A. Huber, S. Pestchanyi, 2012 .

Calculation of runaway electrons stopping power in ITER

Y. Igitkhanov, B. Bazylev, I. Landman, 2011 .

Effects of ELMs on ITER divertor armour materials

A. Loarte, M. Merola, J. Linke, 2007 .

Simulation of dust production in ITER transient events

S. Pestchanyi, I. Landman, 2008 .

Application of powerful quasi-steady-state plasma accelerators for simulation of ITER transient heat loads on divertor surfaces

V. I. Tereshin, O. V. Byrka, I. Garkusha, 2007 .

Improvement of the CFC structure to withstand high heat flux

S. Pestchanyi, I. Landman, 2006 .

Radiation losses from ITER SOL due to divertor material plasma

B. Bazylev, S. Pestchanyi, I. Landman, 2004 .

Estimation of carbon fibre composites as ITER divertor armour

V. Safronov, S. Pestchanyi, I. Landman, 2004 .

Vertical target and FW erosion during off-normal events and impurity production and transport during ELMs typical for ITER-FEAT

F. Kappler, H. Würz, B. Bazylev, 2001 .

Plasma Facing Materials Lifetime in Steady-State DEMO Operation

Y. Igitkhanov, B. Bazylev, I. Landman, 2013 .

Plasma/Surface Interaction in ITER Tokamak Disruption Simulation Experiments

V. Safronov, H. Würz, B. Bazylev, 1997 .

Simulation of W diaphragm efficiency for mitigation of RE beam in ITER

B. Bazylev, S. Pestchanyi, I. Landman, 2015 .

Optimization of MGI in JET using the TOKES code and mitigation of RE damage for the first wall

B. Bazylev, S. Pestchanyi, A. Boboc, 2014 .

Experimental study of PFCs erosion under ITER-like transient loads at plasma gun facility QSPA

A. Loarte, M. Merola, J. Linke, 2009 .

Integrated Modelling of ITER Plasma Dynamics and Wall Processes Following Type I ELMs and Consequences for Tokamak Operation

Y. Igitkhanov, G. Janeschitz, V. Safronov, 2008 .

Simulations of Material Damage to Divertor and First Wall Armour under ITER Transient Loads by Modelling and Experiments

A. Loarte, M. Merola, J. Linke, 2008 .

IT / P 6-12 Simulation of ITER Transient Heat Loads to the Divertor Surfaces with Using the High Power Quasi-Steady-State Plasma Accelerator

V. I. Tereshin, I. Garkusha, V. Chebotarev, 2008 .

Applicability of tungsten/EUROFER blanket module for the DEMO first wall

Y. Igitkhanov, B. Bazylev, L. Boccaccini, 2013 .

Behaviour of melted tungsten plasma facing components under ITER-like transient heat loads: Simulations and experiments

A. Loarte, M. Merola, J. Linke, 2008 .

Performance of deformed tungsten under ELM-like plasma exposures in QSPA Kh-50

A. V. Medvedev, V. I. Tereshin, J. Linke, 2011 .

Melt damage simulation of W-macrobrush and divertor gaps after multiple transient events in ITER

A. Loarte, G. Janeschitz, B. Bazylev, 2007 .

Impurity production and edge plasma pollution during ITER-FEAT ELMs

H. Würz, S. Pestchanyi, I. Landman, 2002 .

GDMT-T: Superconducting Linear Device for PMI Studies

M. Thumm, B. Unterberg, A. Kreter, 2013 .

Erosion simulation of first wall beryllium armour under ITER transient heat loads

A. Loarte, G. Janeschitz, B. Bazylev, 2009 .

Energy Threshold of Brittle Destruction for Carbon-Based Materials

J. Linke, B. Bazylev, S. Pestchanyi, 2004 .

Simulation of tokamak armour erosion and plasma contamination at intense transient heat fluxes in ITER

I. E. Garkusha, A. Loarte, B. N. Bazylev, 2005 .

Effects of ELMs and disruptions on ITER divertor armour materials

A. Loarte, M. Merola, V. Safronov, 2005 .

Residual stresses in tungsten under exposures with ITER ELM-like plasma loads

V. I. Tereshin, A. T. Pugachov, J. Linke, 2009 .

Simulation of multi-atomic interactions in H–O–W system with the MD code CADAC

I. Landman, 2005 .

Molecular dynamics simulations of the effect of deuterium on tungsten erosion by oxygen

I. Landman, H. Wuerz, 2003 .

Dust generation mechanisms under powerful plasma impacts to the tungsten surfaces in ITER ELM simulation experiments

A. T. Pugachov, N. N. Aksenov, I. Garkusha, 2013 .

Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation

W. Fundamenski, G. F. Counsell, A. Loarte, 2007 .

Repetitive Plasma Loads Typical for ITER Type‐I ELMS: Simulation in QSPA Kh‐50

V. I. Tereshin, I. Garkusha, V. Chebotarev, 2006 .

Simulation of iter transient heat loads to the divertor surfaces with using the powerful quasi-steady-state plasma accelerator

V. I. Tereshin, I. Garkusha, V. Chebotarev, 2006 .

Experimental study of PFCs erosion and eroded material deposition under ITER-like transient loads at the plasma gun facility QSPA-T

A. Loarte, M. Merola, J. Linke, 2011 .

The latest results from ELM-simulation experiments in plasma accelerators

V. I. Tereshin, V. Safronov, I. Garkusha, 2009 .

ITER-ELM control requirements, ELM control schemes and required R&D

Jochen Linke, A. Loarte, Peter Lang, 2010 .

Tungsten damage and melt losses under plasma accelerator exposure with ITER ELM relevant conditions

A. T. Pugachov, J. Linke, M. Sadowski, 2014 .

Simulation of tungsten plasma transport along magnetic field under ELM-like heat loads

V. Safronov, N. Arkhipov, S. Pestchanyi, 2013 .

Experimental study of plasma energy transfer and material erosion under ELM-like heat loads

V. I. Tereshin, N. N. Aksenov, I. Garkusha, 2009 .

Experimental verification of FOREV-2D simulations for the plasma shield

S. Pestchanyi, I. Landman, 2009 .

Evaporation and vapor shielding of CFC targets exposed to plasma heat fluxes relevant to ITER ELMs

V. Safronov, N. Arkhipov, S. Pestchanyi, 2009 .

Damage to preheated tungsten targets after multiple plasma impacts simulating ITER ELMs

V. I. Tereshin, I. Garkusha, V. Chebotarev, 2009 .

Tungsten melt layer erosion due to J × B force under conditions relevant to ITER ELMs

V. I. Tereshin, Y. Petrov, B. Bazylev, 2007 .

PLASMA-SURFACE INTERACTION AND MECHANISMS OF DUST PRODUCTION IN ITER ELM SIMULATION EXPERIMENTS WITH QSPA Kh-50

V. Makhlaj, I. Landman, 2012 .

Experimental and theoretical investigation of droplet emission from tungsten melt layer

A. Loarte, G. Janeschitz, V. Safronov, 2009 .

ITER AND FUSION REACTOR ASPECTS INVESTIGATION OF EROSION MECHANISMS AND EROSION PRODUCTS IN DIVERTOR ARMOUR MATERIALS UNDER CONDITIONS RELEVANT TO ELMS AND MITIGATED DISRUPTIONS IN ITER

V. Safronov, N. Arkhipov, S. Pestchanyi, 2008 .

Transient plasma loads to the ITER divertor surfaces : simulation experiments with QSPA Kh - 50

M. Sadowski, N. N. Aksenov, I. Garkusha, 2012 .

High power plasma interaction with tungsten grades in ITER relevant conditions

A. T. Pugachov, J. Linke, M. Sadowski, 2015 .

Specific Features of Mechanism for Dust Production from Tungsten Armor under Action of ELMs

V. Makhlaj, S. Pestchanyi, I. Landman, 2014 .

Tungsten Melt Losses under QSPA Kh-50 Plasma Exposures Simulating ITER ELMs and Disruptions

M. Sadowski, B. Bazylev, V. Makhlai, 2014 .

Estimation of the dust production rate from the tungsten armour after repetitive ELM-like heat loads

I. Garkusha, V. Makhlaj, S. Pestchanyi, 2011 .

Simulation of ITER edge-localized modes' impacts on the divertor surfaces within plasma accelerators

J. Linke, M. Sadowski, N. N. Aksenov, 2011 .

Effect of preheating on the damage to tungsten targets after repetitive ITER ELM-like heat loads

V. I. Tereshin, I. Garkusha, V. Chebotarev, 2007 .

Tungsten erosion under plasma heat loads typical for ITER type I ELMs and disruptions

V. I. Tereshin, S. A. Trubchaninov, I. Garkusha, 2005 .

Experiments and modeling of droplet emission from tungsten under transient heat loads

A. Loarte, V. Safronov, B. Bazylev, 2009 .

Tokamak Code TOKES Models and Implementation

I. Landman, 2009 .

The magnetic vapour shield effect at divertor plates during plasma disruptions

G. Piazza, H. Würz, B. Goel, 1995 .

Erosion simulation of first wall beryllium armour after ITER transient heat loads and runaway electrons action

A. Loarte, Y. Igitkhanov, S. Pestchanyi, 2011 .

Experimental study of divertor plasma-facing components damage under a combination of pulsed and quasi-stationary heat loads relevant to expected transient events at ITER

A. Loarte, M. Merola, J. Linke, 2011 .

ITER transient consequences for material damage: modelling versus experiments

Jochen Linke, A. Loarte, G. Janeschitz, 2007 .

Material Surface Damage under High Pulse Loads Typical for ELM Bursts and Disruptions in ITER

I. E. Garkusha, B. N. Bazylev, V. Safronov, 2004 .

Erosion of macrobrush tungsten armor after multiple intense transient events in ITER

G. Janeschitz, B. Bazylev, S. Pestchanyi, 2005 .

Modelling of SOL transport and radiation losses for ITER with the integrated tokamak code TOKES

G. Janeschitz, I. Landman, 2009 .

Modelling of radiation impact on ITER Beryllium wall

G. Janeschitz, I. Landman, 2009 .

Possibility of decreasing the electron heat flux from open traps

I. Landman, I. Konkashbaev, F. R. Ulinich, 1978 .

Damage of target edges in brush-like geometry in the course of ELM-like plasma pulses in QSPA Kh-50

S. Herashchenko, N. N. Aksenov, I. Garkusha, 2015 .

A 2-D Numerical Simulation of ITER-FEAT Disruptive Hot Plasma-Wall Interaction and Model Validation against Disruption Simulation Experiments

F. Kappler, V. Tolkach, H. Würz, 2001 .

Two-dimensional modeling of disruption mitigation by gas injection

Y. Igitkhanov, R. Pitts, S. Pestchanyi, 2011 .

Simulation of tungsten armour cracking due to small ELMs in ITER

I. Garkusha, S. Pestchanyi, I. Landman, 2010 .

Modelling of wall and SOL processes and contamination of ITER plasma after impurity injection with the tokamak code TOKES

Y. Igitkhanov, R. Pitts, S. Pestchanyi, 2010 .

Numerical simulations of plasma wall interactions for ITER

G. Janeschitz, I. Landman, 2007 .

Calculation of poloidal magnetic field in Tokamak code TOKES

G. Janeschitz, I. Landman, 2008 .

Radiation loads on the ITER first wall during massive gas injection

G. Saibene, M. Sugihara, S. Putvinski, 2013 .

Experimental simulation and numerical modeling of vapor shield formation and divertor material erosion for ITER typical plasma disruptions

V. Safronov, H. Würz, N. Arkhipov, 1995 .

Hot plasma target interaction and quantification of erosion of the ITER slot divertor during disruptions and ELMs

V. I. Tereshin, F. Kappler, V. Tolkach, 1999 .

Final case for a stainless steel diagnostic first wall on ITER

Victor Udintsev, D. Loesser, Jochen Linke, 2015 .

Modelling of Material Damage and High Energy Impacts on Tokamak PFCs during Transient Loads

J. Contributors, G. Saibene, S. Brezinsek, 2012 .

Contamination of ITER core by impurities of tungsten and carbon

G. Janeschitz, I. Landman, 2008 .

Experimental assessment of the effects of ELMs and disruptions on ITER divertor armour materials

A. Loarte, V. Safronov, G. Federici, 2004 .

Effective Thermal Conductivity of Graphite Materials with Cracks

S. Pestchanyi, I. Landman, 2004 .