Erik Serrano

发表

Prediction of timber bending strength and in-member cross-sectional stiffness variation on the basis of local wood fibre orientation

Anders Olsson, Jan Oscarsson, Erik Serrano, 2013, European Journal of Wood and Wood Products.

Finite element modelling of inclined screwed timber to timber connections with a large gap between the elements

Erik Serrano, Coralie Avez, Thierry Descamps, 2015, European Journal of Wood and Wood Products.

Contact-free measurements and numerical analyses of the strain distribution in the joint area of steel-to-timber dowel joints

Erik Serrano, Bertil Enquist, Johan Sjödin, 2006, Holz als Roh- und Werkstoff.

Long term in-situ measurements of displacement, temperature and relative humidity in a multistorey residential clt-building

Erik Serrano, Enquist Bertil, Johan Vessby, 2014 .

Assessment of a three-dimensional fiber orientation model for timber

Min Hu, Jan Oscarsson, Erik Serrano, 2016 .

Influence of Wooden Board Strength Class on the Performance of Cross‐laminated Timber Plates Investigated by Means of Full‐field Deformation Measurements

Erik Serrano, Josef Eberhardsteiner, Josef Füssl, 2014 .

Brittle Failure Modes in Nailed Steel Plate Connections

Erik Serrano, Henrik Danielsson, Per Johan Gustafsson, 2016 .

Rational modelling and design in timber engineering applications using fracture mechanics

Erik Serrano, E. Serrano, 2016 .

Integrative Research for an Enhanced Design of Dowel Connections

Erik Serrano, Michael Schweigler, Michael Dorn, 2015 .

Vertical relative displacements in a medium-rise CLT-building.

Erik Serrano, Bertil Enquist, Johan Vessby, 2010 .

A numerical study of methods to predict the capacity of multiple steel-timber dowel joints

Erik Serrano, Johan Sjödin, E. Serrano, 2008, Holz als Roh- und Werkstoff.

Fracture mechanics in timber engineering – Strength analyses of components and joints

Erik Serrano, Per Johan Gustafsson, P. Gustafsson, 2007 .

Fracture Analysis and Testing of Wood-adhesive Bonds for Timber Engineering Applications

Erik Serrano, Per Johan Gustafsson, 2002 .

Identification of weak sections in glulam beams using calculated stiffness profiles based on lamination surface scanning

Jan Oscarsson, Erik Serrano, Bertil Enquist, 2014 .

FBBB 4.3 Biobaserade skivmaterial : Experimentella undersökningar

Erik Serrano, Michael Dorn, Helena Tuvendal, 2018 .

Strengthening of timber structures with glued-in rods

Erik Serrano, Daniel McPolin, René Steiger, 2015 .

Glued-in rods for timber structures—An experimental study of softening behaviour

Erik Serrano, E. Serrano, 2001 .

Dowel deformations in multi-dowel LVL-connections under moment loading

Erik Serrano, Bertil Enquist, Michael Schweigler, 2015 .

Corrigendum to “Cross laminated timber at in-plane beam loading – Comparison of model predictions and FE-analyses” [Eng. Struct. 179 (2019) 246–254]

Erik Serrano, Henrik Danielsson, Vlatka Rajčić, 2019 .

Experimental characterization of the global and local behavior of multi-dowel LVL-connections under complex loading

Erik Serrano, Bertil Enquist, Michael Schweigler, 2016 .

Characteristic Value of the Modulus of Elasticity (MOE) for Natural and Planted Larch in Northeast China

Erik Serrano, Junhua Xu, Yingchun Gong, 2021, Forests.

Adhesive Joints in Timber Engineering. Modelling and Testing of Fracture Properties

Erik Serrano, E. Serrano, 2000 .

Enhanced design approach for reinforced notched beams

Andrea Frangi, Erik Serrano, Robert Jockwer, 2013 .

Joint study on material properties of adhesives to be used in load-bearing timber-glass composite elements

Bernhard Weller, Erik Serrano, Michael Dorn, 2014 .

Strength grading of narrow dimension Norway spruce side boards in the wet state using first axial resonance frequency

Anders Olsson, Jan Oscarsson, Erik Serrano, 2011 .

Glass, timber and adhesive joints - Innovative load bearing building components

Erik Serrano, Karin Lundstedt, Maria Lang, 2014 .

Cross laminated timber at in-plane beam loading – Prediction of shear stresses in crossing areas

Erik Serrano, Henrik Danielsson, 2018, Engineering Structures.

Simulation of bottom rail fracture in partially anchored shear walls using XFEM

Anders Olsson, Erik Serrano, Bo Källsner, 2012 .

Green-Glued Products for Structural Applications

Jan Oscarsson, Erik Serrano, Bertil Enquist, 2014 .

Strength grading of wet Norway spruce side boards for use as laminations in wet-glued laminated beams

Anders Olsson, Jan Oscarsson, Erik Serrano, 2010 .

Design of Bottom Rails in Partially Anchored Shear Walls Using Fracture Mechanics

Anders Olsson, Erik Serrano, Bo Källsner, 2011 .

Influence of bondline brittleness and defects on the strength of timber finger-joints

Erik Serrano, Per Johan Gustafsson, P. Gustafsson, 1999 .

Glued-in rods

Erik Serrano, René Steiger, Vlatka Rajčić, 2015 .

A numerical study of the shear-strength-predicting capabilities of test specimens for wood-adhesive bonds

Erik Serrano, E. Serrano, 2004 .

Timber/Glass adhesively bonded I-beams

Erik Serrano, Louise Blyberg, 2011 .

An experimental and numerical study of the effect of friction in single dowel joints

Erik Serrano, Bertil Enquist, Johan Sjödin, 2008, Holz als Roh- und Werkstoff.

On the Mechanical Behaviour of Test Specimens for Wood-Adhesive Bonds

Erik Serrano, E. Serrano, 2002 .

Integrative experimental characterization and engineering modeling of single-dowel connections in LVL

Erik Serrano, Bertil Enquist, Michael Schweigler, 2016 .

Mechanical Performance and Modelling of Glulam

Erik Serrano, E. Serrano, 2003 .

Effective stiffness prediction of GLT beams based on stiffness distributions of individual lamellas

Erik Serrano, Josef Eberhardsteiner, Josef Füssl, 2015, Wood Science and Technology.

Finger jointing of freshly sawn Norway Spruce side boards : a comparative study of fracture properties of joints glued with phenol-resorcinol and one-component polyurethane adhesive

Erik Serrano, Bertil Enquist, Magdalena Sterley, 2014 .

Experimental testing of load-bearing timber–glass composite shear walls and beams

Erik Serrano, Michael Dorn, Marcin Kozłowski, 2015 .

In-plane loaded CLT beams - Tests and analysis of element lay-up

Erik Serrano, Vlatka Rajčić, Mario Jeleč, 2017 .

An experimental study of the effects of moisture variations and gradients in the joint area in steel-timber dowel joints

Erik Serrano, Johan Sjödin, E. Serrano, 2008 .

Experimental investigation on timber-glass composite I-beams

Erik Serrano, Bertil Enquist, Marcin Kozłowski, 2014 .

Glued-in rods for timber structures - a 3D model and finite element parameter studies

Erik Serrano, E. Serrano, 2001 .

Experimental investigation of the axial strength of glued-in rods in cross laminated timber

Erik Serrano, Boris Azinović, Miha Kramar, 2018, Materials and Structures.

Structural analysis of in-plane loaded CLT beam with holes: FE-analyses and parameter studies

Erik Serrano, Vlatka Rajčić, Mario Jeleč, 2016 .

Adhesive joints for structural timber/glass applications: Experimental testing and evaluation methods

Erik Serrano, Bertil Enquist, Magdalena Sterley, 2012 .

Strength grading of wet Norway spruce side boards by use of axial dynamic excitation

Anders Olsson, Jan Oscarsson, Erik Serrano, 2010 .

Glued-in rods in cross laminated timber – Numerical simulations and parametric studies

Erik Serrano, Boris Azinović, Miha Kramar, 2019, Construction and Building Materials.

Contact-free measurement and non-linear finite element analyses of strain distribution along wood adhesive bonds

Erik Serrano, Bertil Enquist, E. Serrano, 2005 .