Bo Källsner

发表

Prediction of timber bending strength and in-member cross-sectional stiffness variation on the basis of local wood fibre orientation

Anders Olsson, Jan Oscarsson, Erik Serrano, 2013, European Journal of Wood and Wood Products.

Wooden floor structures with high transverse stiffness

Bo Källsner, Anders Olsson, Kirsi Jarnerö, 2008 .

Tests and Analyses of Slotted-In Steel-Plate Connections in Composite Timber Shear Wall Panels

Bo Källsner, Ulf Arne Girhammar, 2017 .

Elasto-plastic model for analysis of influence of imperfections on stiffness of fully anchored light-frame timber shear walls

Bo Källsner, Ulf Arne Girhammar, 2009 .

Influence of structural stability and material property variations on bending strength of solid timber

Bo Källsner, Hans Petersson, Sigurdur Ormarsson, 2015 .

A unified design method for the racking resistance of timber framed walls for inclusion in Eurocode 5

Bo Källsner, B Griffiths, B Enjily, 2005 .

Influence of initial gap between timber members on stiffness and capacity of shear walls

Anders Olsson, Bo Källsner, Johan Vessby, 2008 .

Ny handbok för horisontalstabilisering av skivbeklädda träregelstommar

Bo Källsner, Ulf Arne Girhammar, Sverker Andreasson, 2010 .

Horisontalstabilisering av träregelstommar : Plastisk dimensionering av väggar med träbaserade skivor

Bo Källsner, Ulf Arne Girhammar, 2009 .

Masonite flexible buildning system for multistorey timber buildnings

Bo Källsner, Ulf Arne Girhammar, Per-Anders Daerga, 2012 .

Nytt paradigm för hållfasthetssortering av konstruktionsvirke: Projektrapport ett

Anders Olsson, Jan Oscarsson, Bo Källsner, 2013 .

Modelling resistance of wooden I-joists exposed to fire

Bo Källsner, Jürgen König, 2006 .

Splitting capacity of bottom rail in partially anchored timber frame shear walls with single-sided sheathing

Bo Källsner, Ulf Arne Girhammar, Helena Lidelöw, 2014 .

Bending strength and stiffness of aspen sawn timber

Anders Olsson, Bo Källsner, Harald Säll, 2007 .

Design aspects on anchoring the bottom rail in partially wood-framed shear walls : CIB-W18/42-15-1

Bo Källsner, Ulf Arne Girhammar, 2009 .

Recommendations for design of anchoring devices for bottom rails in partially anchored timber frame shear walls

Bo Källsner, Ulf Arne Girhammar, Per Anders Daerga, 2010 .

Analysis of influence of imperfections on stiffness of fully anchored light-frame timber shear walls—elastic model

Bo Källsner, Ulf Arne Girhammar, 2008 .

An easy-to-use model for the design of wooden I-joists in fire

Bo Källsner, Jürgen König, 2006 .

Brittle Failures in Timber Beams Loaded Perpendicular to Grain by Connections

Pierre Quenneville, Bo Källsner, Ulf Arne Girhammar, 2015 .

Horizontal Stabilisation of Sheathed Timber Frame Structures Using Plastic Design Methods – Introducing a Handbook Part 3: Basics of the Plastic Design Method

Bo Källsner, Ulf Arne Girhammar, 2016 .

Splitting of beams loaded perpendicular to grain by connections – simple fracture mechanics models

Pierre Quenneville, Bo Källsner, Ulf Arne Girhammar, 2012 .

Högre värdeutbyte genom våt- och torrlimning av sågade sidobrädor till egenskapsoptimerade träprodukter för byggmarknaden

Jan Oscarsson, Bo Källsner, Bertil Enquist, 2009 .

Green-glued laminated beams : High performance and added value

Jan Oscarsson, Bo Källsner, Bertil Enquist, 2010 .

Horizontal Stabilisation of Sheathed Timber Frame Structures Using Plastic Design Methods – Introducing a Handbook : Part 4: Design in Ultimate Limit State

Bo Källsner, Ulf Arne Girhammar, 2016 .

Modelling the bending strength of timber components – Implications to test standards : CIB-W18/42-6-3

Bo Källsner, Jochen Köhler, Tord Isaksson, 2009 .

Influence of contact stress between sheets on strength and stiffness of timber frame shear walls

Bo Källsner, Ulf Arne Girhammar, Johan Vessby, 2010 .

Tests on the splitting failure capacity of the bottom rail due to uplift in partially anchored shear walls

Bo Källsner, Ulf Arne Girhammar, Helena Johansson, 2012 .

Analytical and experimental evaluation of the capacity of the bottom rail in partially anchored timber shear walls

Bo Källsner, Ulf Arne Girhammar, Johan Vessby, 2012 .

Suspended floor element connections for the Masonite flexible building system

Bo Källsner, Ulf Arne Girhammar, Per-Anders Daerga, 2012 .

Analytical models for splitting capacity of bottom rails in partially anchored timber frame shear walls based on fracture mechanics

Bo Källsner, Ulf Arne Girhammar, Giuseppe Caprolu, 2017 .

Some comments on the Sugiyama opening coefficient method and lower-bound solutions for shear walls (Technical note)

Pierre Quenneville, Bo Källsner, Ulf Arne Girhammar, 2012 .

A plastic design procedure for wood frame wall diaphragms

Bo Källsner, Ulf Arne Girhammar, 2008 .

Plastic design of wood frame wall diaphragms in low and medium rise buildings

Bo Källsner, Ulf Arne Girhammar, 2008 .

Plastisk dimensionering av horisontalbelastade skiv-regelstommar i trä

Bo Källsner, Ulf Arne Girhammar, Sverker Andreasson, 2010 .

A complete timber building system for multi-storey buildings

Bo Källsner, Ulf Arne Girhammar, Per-Anders Daerga, 2014 .

Beams loaded perpendicular to grain by connections : Combined effect of edge and end distance

Pierre Quenneville, Bo Källsner, Ulf Arne Girhammar, 2012 .

The Masonite flexible building system for multi-storey timber buildings

Bo Källsner, Ulf Arne Girhammar, Per-Anders Daerga, 2012 .

Design against brittle failure of bottom rails in shear walls

Bo Källsner, Ulf Arne Girhammar, 2016 .

Analysis of fully anchored light-frame timber shear walls—elastic model

Bo Källsner, Ulf Arne Girhammar, U. Girhammar, 2009 .

Design of Bottom Rails in Partially Anchored Shear Walls Using Fracture Mechanics

Anders Olsson, Erik Serrano, Bo Källsner, 2011 .

Horizontal Stabilisation of Sheathed Timber Frame Structures Using Plastic Design Methods – Introducing a Handbook Part 2: Design of Joints and Anchoring Devices

Bo Källsner, Ulf Arne Girhammar, 2016 .

Strength grading of structural timber based on buckling analysis and scanning techniques

Bo Källsner, Hans Petersson, Sigurdur Ormarsson, 2016 .

Evaluation of two analytical plastic design models for light-frame shear walls

Bo Källsner, Ulf Arne Girhammar, Johan Vessby, 2012 .

Plastic models for analysis of fully anchored light-frame timber shear walls

Bo Källsner, Ulf Arne Girhammar, 2009 .

Comparison of models and tests on bottom rails in timber frame shear walls experiencing uplift

Bo Källsner, Ulf Arne Girhammar, Giuseppe Caprolu, 2015 .

SLOTTED-IN STEEL-PLATE CONNECTIONS FOR PANEL WALL ELEMENTS - EXPERIMENTAL AND ANALYTICAL STUDY

Bo Källsner, Ulf Arne Girhammar, Per-Anders Daerga, 2012 .

Dynamic excitation and higher bending modes for prediction of timber bending strength

Anders Olsson, Jan Oscarsson, Bo Källsner, 2010 .

Stiffness model for inclined screws in shear-tension mode in timber-to-timber joints

Bo Källsner, Ulf Arne Girhammar, Nicolas Jacquier, 2017 .

A plastic design method for incompletely anchored wood-framed wall diaphragms

Bo Källsner, Ulf Arne Girhammar, 2006 .

Horizontal Stabilisation of Sheathed Timber Frame Structures Using Plastic Design Methods – Introducing a Handbook Part 1: Design Principles for Horizontal Stabilisation

Bo Källsner, Ulf Arne Girhammar, 2016 .

Directional dependency in an OSB sheathing-to-framing mechanical connection

Bo Källsner, Bertil Enquist, Johan Vessby, 2014 .

Evaluation of softening behaviour of timber light-frame walls subjected to in-plane forces using simple FE models

Anders Olsson, Bo Källsner, Ulf Arne Girhammar, 2014 .

Wet glued laminated beams using side boards of Norway spruce

Jan Oscarsson, Bo Källsner, Bertil Enquist, 2011 .

Vibrations of wooden floor elements on supporting steel framework

Bo Källsner, Hans Petersson, Kirsi Salmela, 2004 .

Fire exposed light-frame timber walls : A study on the effect of geometrical reduction of a vertically loaded I-section stud

Bo Källsner, Anders Olsson, Louise Blyberg, 2009 .

Shape stability of laminated planks made of green-glued pairs of side boards

Bo Källsner, Hans Petersson, Sigurdur Ormarsson, 2005 .

Some design aspects on anchoring of timber frame shear walls by transverse walls

Bo Källsner, Ulf Arne Girhammar, Johan Vessby, 2010 .

Predicting the strength of sawn wood products : a comparison between x-ray scanning of logs and machine strength grading of lumber

Bo Källsner, Johan Oja, Stig Grundberg, 2005 .

Plastic design of partially anchored wood-framed wall diaphragms with and without openings

Bo Källsner, Ulf Arne Girhammar, U. Girhammar, 2005 .

Bending strength of timber beams made of green glued pairs of side boards

Bo Källsner, Hans Petersson, 2005 .

Simulation of bottom rail fracture in partially anchored shear walls using XFEM

Anders Olsson, Erik Serrano, Bo Källsner, 2012 .

Lengthwise Bending Strength Variation of Structural Timber Paper prepared for IUFRO / S

Bo Källsner, Ove Ditlevsen, .

Shear modulus of structural timber evaluated by means of dynamic excitation and FE analysis

Anders Olsson, Bo Källsner, A. Olsson, 2015 .

Effect of transverse walls on capacity of wood-framed wall diaphragms - Part 2

Bo Källsner, Ulf Arne Girhammar, 2009 .

Numerical analysis of failure modes and force distribution in a pitched roof structure of wood

Bo Källsner, Sigurdur Ormarsson, Johan Vessby, 2016 .

Experimental verification of a weak zone model for timber in bending

Bo Källsner, O. Ditlevsen, Ove Dalager Ditlevsen, 1997 .

Design aspects on anchoring the bottom rail in partially anchored wood-framed shear walls

Bo Källsner, Ulf Arne Girhammar, 2009 .

Prediction of timber bending strength on basis of bending stiffness and material homogeneity assessed from dynamic excitation

Anders Olsson, Jan Oscarsson, Bo Källsner, 2011, Wood Science and Technology.

Effect of transverse walls on capacity of wood-framed wall diaphragms without tie-downs

Bo Källsner, Ulf Arne Girhammar, 2006 .