Hamid Jahed

发表

Fatigue life prediction of autofrettage tubes using actual material behaviour

Mohammad Hosseini, Hamid Jahed, Behrooz Farshi, 2006 .

Fatigue Life Prediction of an Automotive Chassis System with Combined Hardening Material Model

Daniel Gross, Hamid Jahed, John K. George, 2016 .

Actual Unloading Behavior and Its Significance on Residual Stress in Machined Autofrettaged Tubes

Hamid Jahed, Ghader Ghanbari, H. Jahed, 2003 .

Upper and lower fatigue life limits model using energy-based fatigue properties

Hamid Jahed, A. Varvani-Farahani, H. Jahed, 2006 .

Variable material property method in the analysis of cold-worked fastener holes

Hamid Jahed, S. B. Lambert, R. N. Dubey, 2000 .

Optimum Autofrettage and Shrink-Fit Combination in Multi-Layer Cylinders

Hamid Jahed, Behrooz Farshi, Morvarid Karimi, 2006 .

An asymmetric elastic–plastic analysis of the load-controlled rotating bending test and its application in the fatigue life estimation of wrought magnesium AZ31B

Hamid Jahed, E. Kalatehmollaei, Hassan Mahmoudi-Asl, 2014 .

Using Level Set Method in Order to Design Structures Against Buckling

Amir Khajepour, Hamid Jahed, Alireza Kasaiezadeh, 2010, DAC 2010.

Monotonic and Fatigue Behavior of Magnesium Extrusion Alloy AM30: An International Benchmark Test in the "Magnesium Front End Research and Development Project"

Lin Zhang, Mark F. Horstemeyer, Steve Lambert, 2010 .

Interactive Learning Applied in Undergraduate Mechanical and Mechatronics Courses at the University of Waterloo

Hamid Jahed, Gordon D. Stubley, J. Imbert, 2010 .

Minimum weight design of inhomogeneous rotating discs

Hamid Jahed, Jalal Bidabadi, Behrooz Farshi, 2005 .

Fatigue failure analysis of welded structures: An overview and A case study

Hamid Jahed, Elfaitori Ibrahim, Seyed Behzad Behravesh, 2016 .

A variable material property approach for elastic-plastic analysis of proportional and nonproportional loading

Hamid Jahed, 1997 .

Nondestructive Phase Variation-Based Chipless Sensing Methodology for Metal Crack Monitoring

Nasser Masoumi, Hamid Jahed, Maryam Norouzi, 2021, IEEE Transactions on Instrumentation and Measurement.

Cohesive zone modeling of ductile tearing process in brazed joints

Amir Khajepour, Hamid Jahed, A. Khajepour, 2013 .

Mechanical reliability characterization of low carbon steel brazed joints with copper filler metal

Amir Khajepour, Hamid Jahed, A. Khajepour, 2011 .

An Axisymmetric Method of Elastic-Plastic Analysis Capable of Predicting Residual Stress Field

Hamid Jahed, R. N. Dubey, R. Dubey, 1997 .

Loading and unloading behaviour of a thermoplastic disc

Hamid Jahed, H. Jahed, R. Shirazi, 2001 .

Optimum design of inhomogeneous non-uniform rotating discs

Hamid Jahed, Behrooz Farshi, B. Farshi, 2004 .

An energy-based fatigue life assessment model for various metallic materials under proportional and non-proportional loading conditions

Iman Khalaji, Hamid Jahed, M. Noban, 2007 .

Multiaxial effects on LCF behaviour and fatigue failure of AZ31B magnesium extrusion

Hamid Jahed, Jafar Albinmousa, H. Jahed, 2014 .

A numerical optimization technique for design of wheel profiles

Hamid Jahed, Behrooz Farshi, Asghar Nasr, 2008 .

Split sleeve cold expansion of AZ31B sheet: Microstructure, texture and residual stress

Hamid Jahed, S. K. Shaha, Seyed Behzad Behravesh, 2020, Materials & Design.

On the sensitivity and repeatability of fiber Bragg grating sensors used in strain and material degradation measurement of magnesium alloys under cyclic loads

Hamid Jahed, Ehsan Toyserkani, E. Toyserkani, 2016 .

Total deformation theory for non-proportional loading

Hamid Jahed, S. B. Lambert, R. N. Dubey, 1998 .

The actual unloading behavior effect on thermo-mechanical stress intensity factor and life of autofrettage tubes

Hamid Jahed, Behrooz Farshi, B. Farshi, 2007 .

Ratchetting strain prediction

Hamid Jahed, H. Jahed, M. Noban, 2007 .