Takashi Nishii

Tsuyoshi Koyama, Hideki Yoshikawa, Yoshinobu Sato, 2006, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.

Segmentation of pelvis and femur from 3D CT images

Hideki Yoshikawa, Yoshinobu Sato, Nobuhiko Sugano, 2001, Computer Assisted Radiology and Surgery - International Congress and Exhibition.

Shape-based acetabular cartilage segmentation: application to CT and MRI datasets

Yoshinobu Sato, Takashi Nishii, Reza Aghaeizadeh Zoroofi, 2016, International Journal of Computer Assisted Radiology and Surgery.

Segmentation of Acetabular Cartilage in CT Arthrography using Probabilistic Atlas Spatially Normalized by Pelvic Shape (パターン認識・メディア理解)

Hideki Yoshikawa, Yoshinobu Sato, Takashi Nishii, 2013 .

Accuracy of a 3D fluoroscopic navigation system using a flat-panel detector-equipped C-arm

Nobuhiko Sugano, Takashi Nishii, Masaki Takao, 2011, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.

MRI‐based surgical simulation of transtrochanteric rotational osteotomy for femoral head osteonecrosis

Tsuyoshi Koyama, Hideki Yoshikawa, Yoshinobu Sato, 2009, CARS.

Limits to the Accuracy of 3D Thickness Measurement in Magnetic Resonance Images

Yoshinobu Sato, Nobuhiko Sugano, Hironobu Nakamura, 2001, MICCAI.

Host bone coverage requirements for press-fit acetabular cup fixation. 3D-CT analysis

Tsuyoshi Koyama, Hideki Yoshikawa, Nobuhiko Sugano, 2004, Computer Assisted Radiology and Surgery - International Congress and Exhibition.

Automated segmentation of the hip bones and cartilages in multi-slice CT images (医用画像)

Takashi Nishii, Hisashi Tanaka, Reza A. Zoroofi, 2008 .

Three-Dimensional Reconstruction and Quantification of Hip Joint Cartilages from Magnetic Resonances Images

Yoshinobu Sato, Nobuhiko Sugano, Hironobu Nakamura, 1999, MICCAI.

Limits on the accuracy of 3-D thickness measurement in magnetic resonance images-effects of voxel anisotropy

Hideki Yoshikawa, Yoshinobu Sato, Nobuhiko Sugano, 2003, IEEE Transactions on Medical Imaging.

Comparison of rotational acetabular osteotomy performed with navigation by surgeons with different levels of experience of osteotomies

Nobuhiko Sugano, Takashi Nishii, Masaki Takao, 2017, International Journal of Computer Assisted Radiology and Surgery.

Automated knowledge-based segmentation and analysis of the hip bones and cartilages using multi-slice CT data

Yoshinobu Sato, Takashi Nishii, Hisashi Tanaka, 2011 .

Recovery of walking speed and symmetrical movement of the pelvis and lower extremity joints after unilateral THA.

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2004, Journal of biomechanics.

Acetabular cartilage segmentation in CT arthrography based on a bone-normalized probabilistic atlas

Yoshinobu Sato, Takashi Nishii, Reza Aghaeizadeh Zoroofi, 2014, International Journal of Computer Assisted Radiology and Surgery.

Accuracy Validation of Cone-Beam CT Based Registration

Takashi Ishikawa, Yoshikazu Nakajima, Yoshinobu Sato, 2001, MICCAI.

Effectiveness of the ROBODOC System during Total Hip Arthroplasty in Preventing Intraoperative Pulmonary Embolism

Hideki Yoshikawa, Nobuhiko Sugano, Takashi Nishii, 2002, MICCAI.

Effects of CT threshold value to make a surface bone model on accuracy of shape-based registration in a CT-based navigation system for hip surgery

Yoshikazu Nakajima, Yoshinobu Sato, Nobuhiko Sugano, 2001, CARS.

A Knowledge Based Technique for Automatic Segmentation of the Hip Femoral Cartilage in CT Images

Hideki Yoshikawa, Yoshinobu Sato, Nobuhiko Sugano, 2007 .

Accuracy fo 3D-MR image registration to evaluate lesion size change in the femoral hesd osteonecrosis

Hideki Yoshikawa, Yoshinobu Sato, Nobuhiko Sugano, 2003, Computer Assisted Radiology and Surgery - International Congress and Exhibition.

Progress in Sizing Press for Hot Strip Mill Line

Takashi Nishii, Nobuhiro Tazoe, Yasushi Dodo, 2009 .

A high-performance computing service over the Internet for nonrigid image registration

Hideki Yoshikawa, Fumihiko Ino, Kenichi Hagihara, 2003, CARS.

A computer-assisted curved-bladed Tuke Saw for spherical osteotomy

Tsuyoshi Koyama, Yoshinobu Sato, Nobuhiko Sugano, 2003, CARS.

A Hybrid Technique for Automatic Quantification of the Hip Joint Cartilages in MR Images

Hironobu Nakamura, Takashi Nishii, Yoshinobu Sato, 2007 .

Automated visualization of femoral and acetabular cartilages in MR images of the hip (医用画像)

Yoshinobu Sato, Takashi Nishii, Hisashi Tanaka, 2008 .

Evaluation of the accuracy of computed tomography-based navigation for femoral stem orientation and leg length discrepancy.

Nobuhiko Sugano, Akihiro Kakimoto, Takashi Nishii, 2011, The Journal of arthroplasty.

Three-dimensional distribution of acetabular cartilage thickness in patients with hip dysplasia: a fully automated computational analysis of MR imaging.

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2004, Osteoarthritis and cartilage.

Does CT-Based Navigation Improve the Long-Term Survival in Ceramic-on-Ceramic THA?

Nobuhiko Sugano, Hidenobu Miki, Takashi Nishii, 2012, Clinical orthopaedics and related research.

Comparison of the fit and fill between the Anatomic Hip femoral component and the VerSys Taper femoral component using virtual implantation on the ORTHODOC workstation

Hideki Yoshikawa, Nobuhiko Sugano, Takashi Nishii, 2003, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

Preoperative templating of femoral components on plain X-rays

Hideki Yoshikawa, Mitsuyoshi Yamamura, Nobuhiko Sugano, 2007, Archives of Orthopaedic and Trauma Surgery.

Optimizing femoral anteversion and offset after total hip arthroplasty, using a modular femoral neck system: an experimental study

Nobuhiko Sugano, Takashi Nishii, Takahiro Ochi, 2000, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

Change in knee cartilage T2 in response to mechanical loading

Hideki Yoshikawa, Takashi Nishii, Kagayaki Kuroda, 2008, Journal of magnetic resonance imaging : JMRI.

Safety and Accuracy of Ct-Based Navigation for Rotational Acetabular Osteotomy

Hidenobu Miki, Takashi Nishii, Masaki Takao, 2015 .

Hip range‐of‐motion (ROM) is less than normal after rotational acetabular osteotomy for developmental dysplasia of the hip: A simulated ROM analysis

Nobuhiko Sugano, Takashi Nishii, Masaki Takao, 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Raman spectroscopy investigation of load-assisted microstructural alterations in human knee cartilage: Preliminary study into diagnostic potential for osteoarthritis.

Nobuhiko Sugano, Takashi Nishii, Masaki Takao, 2014, Journal of the mechanical behavior of biomedical materials.

Anatomic hip range of motion after implantation during total hip arthroplasty as measured by a navigation system.

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2007, The Journal of arthroplasty.

Computer Simulation Analysis on the Machinability of Alumina Dispersion Enforced Copper Alloy for High Performance Compact Heat Exchanger

Takashi Nishii, Shintaro Ishiyama, Yasushi Muto, 2001 .

Serious metallosis of a metal head due to fragmented ceramic screws in a cemented THA

Hideki Yoshikawa, Mitsuyoshi Yamamura, Nobuhiko Sugano, 2006, Archives of Orthopaedic and Trauma Surgery.

Stem length and canal filling in uncemented custom-made total hip arthroplasty

Nobuhiko Sugano, Takashi Nishii, Takahiro Ochi, 1999, International Orthopaedics.

Application of computed tomography-based navigation for revision total hip arthroplasty.

Nobuhiko Sugano, Takashi Nishii, Nobuo Nakamura, 2013, The Journal of arthroplasty.

Comparison between hand rasping and robotic milling for stem implantation in cementless total hip arthroplasty.

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2006, The Journal of arthroplasty.

Loaded cartilage T2 mapping in patients with hip dysplasia.

Nobuhiko Sugano, Takashi Nishii, Hisashi Tanaka, 2010, Radiology.

Volume Increases of the Gluteus Maximus, Gluteus Medius, and Thigh Muscles After Hip Arthroplasty.

Nobuhiko Sugano, Takashi Nishii, Masaki Takao, 2016, The Journal of arthroplasty.

Fat-suppressed 3D spoiled gradient-echo MRI and MDCT arthrography of articular cartilage in patients with hip dysplasia.

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2005, AJR. American journal of roentgenology.

Application of three-dimensional magnetic resonance image registration for monitoring hip joint diseases.

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2005, Magnetic resonance imaging.

Comparison of mini-incision total hip arthroplasty through an anterior approach and a posterior approach using navigation.

Nobuhiko Sugano, Hidenobu Miki, Takashi Nishii, 2009, The Orthopedic clinics of North America.

Measurements of Pelvic Flexion Angle Using Three-Dimensional Computed Tomography

Hideki Yoshikawa, Nobuhiko Sugano, Takashi Nishii, 2003, Clinical orthopaedics and related research.

Influence of component positions on dislocation: computed tomographic evaluations in a consecutive series of total hip arthroplasty.

Tsuyoshi Koyama, Hideki Yoshikawa, Nobuhiko Sugano, 2004, The Journal of arthroplasty.

Application of 3D‐MR image registration to monitor diseases around the knee joint

Tsuyoshi Koyama, Hideki Yoshikawa, Nobuhiko Sugano, 2005, Journal of magnetic resonance imaging : JMRI.

Clinical accuracy evaluation of femoral canal preparation using the ROBODOC system

Hideki Yoshikawa, Nobuhiko Sugano, Takashi Nishii, 2004, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

Automated segmentation of necrotic femoral head from 3D MR data.

Hideki Yoshikawa, Nobuhiko Sugano, Takashi Nishii, 2004, Computerized medical imaging and graphics : the official journal of the Computerized Medical Imaging Society.

Comparison of navigation accuracy in THA between the mini‐anterior and ‐posterior approaches

Hideki Yoshikawa, Nobuhiko Sugano, Hidenobu Miki, 2009, The international journal of medical robotics + computer assisted surgery : MRCAS.

Iliosacral screw insertion using CT-3D-fluoroscopy matching navigation.

Hideki Yoshikawa, Nobuhiko Sugano, Takashi Nishii, 2014, Injury.

A Novel Combined Acetabular and Femoral Computer Navigation System

Nobuhiko Sugano, Takashi Nishii, Shinichi Tamura, 2001 .

The results of a press-fit-only technique for acetabular fixation in hip dysplasia.

Nobuhiko Sugano, Takashi Nishii, Masaki Takao, 2011, The Journal of arthroplasty.

A Comparison between Robotic-assisted and Manual Implantation of Cementless Total Hip Arthroplasty

Nobuhiko Sugano, Hidenobu Miki, Akihiro Kakimoto, 2010, Clinical orthopaedics and related research.

A novel system of four‐dimensional motion analysis after total hip arthroplasty

Naoki Suzuki, Hideki Yoshikawa, Nobuhiko Sugano, 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.