Anna Reggio

发表

Shaking table tests on a passive equipment isolation system for earthquake protection

G. De Canio, M. De Angelis, Salvatore Perno, 2009 .

Feasibility of a passive isolation system with nonlinear hysteretic behaviour for the seismic protection of critical equipment

Anna Reggio, M. De Angelis, 2011 .

A Darwinian evolution of electrical power systems design for preventing seismic risks in sensitive buildings

Giuseppe Parise, Anna Reggio, Maurizio De Angelis, 2011, 2011 IEEE Industrial and Commercial Power Systems Technical Conference.

A passive isolation system with nonlinear hysteretic behaviour: modelling and numerical investigations

Anna Reggio, Maurizio De Angelis, 2011 .

State-space identification of non-viscously damped systems

Anna Reggio, M. De Angelis, A. Reggio, 2013 .

Seismic performance of exoskeleton structures

Anna Reggio, Luciana Restuccia, Giuseppe Andrea Ferro, 2019 .

Comparison between structure- and crowd-based mitigation strategies on vibrating footbridges

Anna Reggio, Fiammetta Venuti, 2018 .

Optimal design of an equipment isolation system with nonlinear hysteretic behaviour

Anna Reggio, Maurizio De Angelis, M. De Angelis, 2013 .

Stochastic Multi-objective Optimisation of Exoskeleton Structures

Anna Reggio, Giuseppe Carlo Marano, Giuseppe Andrea Ferro, 2020, Journal of Optimization Theory and Applications.

Dynamic response and optimal design of structures with large mass ratio TMD

Salvatore Perno, Anna Reggio, Maurizio De Angelis, 2012 .

Criteria for the Definition of the Equipment Seismic Levels: Comparisons Between USA and European Codes

Giuseppe Parise, Anna Reggio, Maurizio De Angelis, 2014, IEEE Transactions on Industry Applications.

Combined primary-secondary system approach to the design of an equipment isolation system with High-Damping Rubber Bearings

Anna Reggio, Maurizio De Angelis, A. Reggio, 2014 .

Seismic Qualification Categories (EQC) of electrical equipment

Luigi Martirano, Giuseppe Parise, Luigi Parise, 2013, 2013 IEEE Industry Applications Society Annual Meeting.

Optimization of a non-conventional TMD implemented via inter-storey isolation

Anna Reggio, M. De Angelis, 2014 .

Mitigation of human-induced vertical vibrations of footbridges through crowd flow control

Anna Reggio, Fiammetta Venuti, 2018, Structural Control and Health Monitoring.

Feasibility and effectiveness of exoskeleton structures for seismic protection

Anna Reggio, Luciana Restuccia, Giuseppe Andrea Ferro, 2018 .

Criteria for the definition of the Equipment Seismic Levels (ESL): Comparisons between USA and European codes

Giuseppe Parise, Anna Reggio, Maurizio De Angelis, 2013, 2013 IEEE Industry Applications Society Annual Meeting.

Optimal design of a passive nonlinear isolation system for the seismic protection of equipment

Anna Reggio, M. De Angelis, 2012 .

Optimal energy‐based seismic design of non‐conventional Tuned Mass Damper (TMD) implemented via inter‐story isolation

Anna Reggio, Maurizio De Angelis, A. Reggio, 2015 .

A state-space methodology to identify modal and physical parameters of non-viscously damped systems

Anna Reggio, Raimondo Betti, Maurizio De Angelis, 2013 .