Jiro Ishikawa

发表

Surface Temperature and Scoring Resistance of Heavy-Duty Gears

Jiro Ishikawa, Kunikazu Hayashi, Masaaki Yokoyama, 1974 .

New Measuring Method of Accumulative Pitch Error of Cylindrical Gears

Jiro Ishikawa, Hiroshi Kiuchi, Shigeo Sukigara, 1965 .

28 nm 50% Power-Reducing Contacted Mask Read Only Memory Macro With 0.72-ns Read Access Time Using 2T Pair Bitcell and Dynamic Column Source Bias Control Technique

Koji Nii, Jiro Ishikawa, Shinji Tanaka, 2014, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

Measurement of Transmission Error Including Backlash in Angle Transmission Mechanisms for Mechatronic Systems

Aiguo Ming, Chisato Kanamori, Makoto Kajitani, 2001 .

A Numerically Controlled Machine Tool Newly Built at Tokyo Institute of Technology

Jiro Ishikawa, Kazuo Nakano, Keikichi Ebihara, 1957 .

On the evaluation method for tooth profile error of gears.

Makoto Kajitani, Jiro Ishikawa, 1988 .

A Measuring Method of Gear Accuracy by Means of Two Feelers

Jiro Ishikawa, Hitoshi Ohmura, 1963 .

On the Analysis of Recorded Data in Two-flank Gear Roll Testing:Part 1 Pressure Angle Error

Jiro Ishikawa, Masao Tomii, 1964 .

A 28 nm 50% power reduced 2T mask ROM with 0.72 ns read access time using column source bias

Koji Nii, Kazumasa Yanagisawa, Jiro Ishikawa, 2011, 2011 IEEE Custom Integrated Circuits Conference (CICC).

On the Accuracy of Machine Tool Gears

Jiro Ishikawa, Mitsuo Arai, 1964 .

A Study on a Form Grinding of Gears (1st Report):On a Circular Arc which is a Fairly Good Approximation to an Involute Curve

Jiro Ishikawa, Nobuhiro Tsuda, Yasumasa Fukuda, 1974 .

On the Indexing Accuracy of Gear Type Condenser

Jiro Ishikawa, Masao Tomii, Konsyu Ma, 1960 .

On the Measurement of Gear Accuracy( Gear)

Jiro Ishikawa, 1976 .

Load Blancing Theory on a Planetary Gearing

Jiro Ishikawa, Teru Hayashi, Takashi Takahasi, 1970 .

On the Accuracy of Gears used in Machine Tools (the Journal and the Transactions of the Japan Society of Mechanical Engineers)

Jiro Ishikawa, Mitsuo Arai, 1965 .

On the Measurement of Gears

Jiro Ishikawa, Teru Hayashi, Masao Tomii, 1963 .

On the International Symposium on Gearing and Power Transmissions

Jiro Ishikawa, 1982 .

Present and Future of Gear Technology( Future Development of Mechanical Engineering and Industries)

Jiro Ishikawa, 1979 .

40-nm 64-kbit Buffer/Backup SRAM with 330 nW Standby Power at 65°C Using 3.3 V IO MOSs for PMIC less MCU in IoT Applications

Koji Nii, Jiro Ishikawa, Daisuke Nakamura, 2018, 2018 IEEE Asian Solid-State Circuits Conference (A-SSCC).

The Dressing Attachment forming a Grind Wheel along an Involute Curve Based on the Movement of the Circular Arc

Jiro Ishikawa, Nobuhiro Tsuda, Yasumasa Fukuda, 1974 .

A New Gear Accuracy Measuring System by Measuring the Coordinates of Gear Profile

Jiro Ishikawa, Yuichi Ishikawa, 1976 .

A Study on Internal Gear with Straight Line Tooth Profile (1st Report) : On Approximate Tooth Profile of Mating Pinion

Jiro Ishikawa, Yuichi Ishikawa, 1978 .

On the Deflection of Gear Teeth

Jiro Ishikawa, 1951 .

Effects of Contact Ratio and Profile Correction on Gear Rotational Vibration

Kiyohiko Umezawa, Jiro Ishikawa, Taichi Sato, 1983 .

Simulation of Rotational Vibration of Spur Gears

Kiyohiko Umezawa, Jiro Ishikawa, Taich Sato, 1984 .

Deflection Due to Contact between Gear Teeth with Finite Width

Kiyohiko Umezawa, Jiro Ishikawa, 1972 .

On Cylindrical Gears without Statical Behaviours of Driven Gears under any Load

Kiyohiko Umezawa, Jiro Ishikawa, 1974 .