J. Qin

发表

Application of Color Metallography on As-cast Al-Mg-Si-Cu-Mn Alloy during Heat Treatment

H. Nagaumi, Xiaoguo Wang, J. Qin, 2022, Journal of Physics: Conference Series.

Quantitative analysis of influence of α-Al(MnFeCr)Si dispersoids on hot deformation and microstructural evolution of Al-Mg-Si alloys

H. Nagaumi, Xiaoguo Wang, J. Qin, 2022, Transactions of Nonferrous Metals Society of China.

Sub-grain Boundary Mobility of 6XXX Alloys during Annealing

H. Nagaumi, Xiaoguo Wang, J. Qin, 2022, Journal of Physics: Conference Series.

Mechanisms of extrusion-ratio dependent ultrafine-grain fabrication in AZ31 magnesium alloy by continuous squeeze casting-extrusion

Weisi Guo, S. Lü, Shusen Wu, 2022, Journal of Materials Processing Technology.

Microstructure and strengthening mechanism of boride in-situ reinforced titanium matrix composites prepared by plasma activated sintering

Q. Shen, G. Luo, Jian Zhang, 2021, Ceramics International.

Mechanical Properties and Strengthening Mechanisms of Al-15 Pct B4C Composites with Sc and Zr at Elevated Temperatures

Zhan Zhang, J. Qin, X.-Grant Chen, 2016, Metallurgical and Materials Transactions A.

Improved Distribution and Uniformity of α-Al(Mn,Cr)Si Dispersoids in Al-Mg-Si-Cu-Mn (6xxx) Alloys by Two-Step Homogenization

H. Nagaumi, Zhen Li, Xiaoguo Wang, 2021, Metallurgical and Materials Transactions A.

The Effect of α-Al(MnCr)Si Dispersoids on Activation Energy and Workability of Al-Mg-Si-Cu Alloys during Hot Deformation

H. Nagaumi, Xiaoguo Wang, J. Qin, 2020 .

Hot Deformation and Processing Maps of Al-15%B4C Composites Containing Sc and Zr

Zhan Zhang, J. Qin, X.-Grant Chen, 2017, Journal of Materials Engineering and Performance.

Coarsening behavior of Mg2Si precipitates during post homogenization cooling process in Al-Mg-Si alloy

H. Nagaumi, J. Qin, Yifeng Li, 2021, Journal of Alloys and Compounds.

Evolution of activation energy during hot deformation of Al–15% B4C composites containing Sc and Zr

Zhan Zhang, J. Qin, X.-Grant Chen, 2019, AIMS Materials Science.

Effect of Mn/Cr ratio on precipitation behaviors of α-Al(FeMnCr)Si dispersoids and mechanical properties of Al–Mg–Si–Cu alloys

Qi-peng Dong, Wei Zhou, H. Nagaumi, 2022, Materials Science and Engineering: A.

Hydrostatic pressure–volumetric strain relationship of steel fiber-reinforced concrete under different stress conditions

Long Meng, J. Qin, Huang Ruiyuan, 2020 .

Study on impact damage mechanisms and TAI capacity for the composite scarf repair of the primary load-bearing level

Bin Liu, Fei Xu, J. Qin, 2017 .

Fatigue crack growth behavior of NBR, HNBR, HNBR ZSC compounds

A. S. Béranger, J. Qin, P. Heuillet, 2018 .

Effect of Free Water on the Mechanical Properties and Blast Resistance of Concrete

Ruiyuan Huang, J. Qin, Liangliang Hu, 2021, KSCE Journal of Civil Engineering.

Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature

Zhan Zhang, J. Qin, X.-Grant Chen, 2017 .

Effect of Hot Deformation on Microstructure and Mechanical Properties of Al-B4C Composite Containing Sc

Zhan Zhang, X. Chen, J. Qin, 2014 .

Precipitation of dispersoids in Al–Mg–Si alloys with Cu addition

H. Nagaumi, Zhen Li, J. Qin, 2021 .

Effect of floating grains on the deformed microstructure of Mn- and Cr-containing Al-Mg-Si-Cu alloys

Qi-peng Dong, H. Nagaumi, J. Qin, 2022, Materials Letters.