Y. Onuki

发表

Texture Memory in Si-Mn and ODS Steels Observed In Situ by Pulsed Neutron and Synchrotron X-Ray Diffractions and Prediction by Double Kurdjumov-Sachs Relation: A Concept for Intense Variant Selection

Shigeo Sato, M. François, A. Hoshikawa, 2021, Metallurgical and Materials Transactions A.

Local stress development in polycrystalline Fe-17mol%Ga alloy under tensile loading – In situ measurement using synchrotron X-ray micro-beam

Shigeo Sato, K. Kajiwara, Shigeru Suzuki, 2015 .

In-plane low thermal expansion of NiTi via controlled cross rolling

Qingping Sun, Laifeng Li, Qiao Li, 2021 .

Texture Memory in Hexagonal Metals and Its Mechanism

Shigeo Sato, S. Vogel, T. Tomida, 2021, Metals.

In Situ Observation for Deformation-Induced Martensite Transformation (DIMT) during Tensile Deformation of 304 Stainless Steel Using Neutron Diffraction. PART I: Mechanical Response

Shigeo Sato, Y. Onuki, S. Sato, 2020, Quantum Beam Science.

Anomalous Twinning as the Macroscopic Deformation Mechanism for AZ31 Magnesium Alloy

Shigeo Sato, Y. Onuki, S. Sato, 2019, Key Engineering Materials.

In Situ Observation of Bainite Transformation and Simultaneous Carbon Enrichment in Austenite in Low-Alloyed TRIP Steel Using Time-of-Flight Neutron Diffraction Techniques

Shigeo Sato, A. Hoshikawa, T. Tomida, 2019, Metallurgical and Materials Transactions A.

Strain-Induced Martensitic Transformation and Texture Evolution in Cold-Rolled Co–Cr Alloys

A. Chiba, K. Yamanaka, M. Mori, 2018 .

Grain-orientation-dependent of γ–ε–α′ transformation and twinning in a super-high-strength, high ductility austenitic Mn-steel

M. A. Mohtadi-Bonab, J. Szpunar, A. Zarei‐Hanzaki, 2016 .

Austenite stabilization kinetics in early stages of austempering treatment in TRIP-aided steel using in-situ neutron diffraction technique

M. Koyama, Shigeo Sato, Tomohiko Hojo, 2022, Materialia.

In Situ Observation for Deformation-Induced Martensite Transformation during Tensile Deformation of SUS 304 Stainless Steel by Using Neutron Diffraction PART II: Transformation and Texture Formation Mechanisms

Shigeo Sato, Y. Onuki, S. Sato, 2021, Quantum Beam Science.

Tailoring thermal expansion of shape memory alloys through designed reorientation deformation

Qingping Sun, Qiao Li, Y. Onuki, 2021 .

Rapid measurement scheme for texture in cubic metallic materials using time‐of‐flight neutron diffraction at iMATERIA

M. Hayashi, Shigeo Sato, H. Todoroki, 2016 .

The significance of thermomechanical processing on the cellular response of biomedical Co-Cr-Mo alloys.

A. Chiba, K. Yamanaka, M. Mori, 2022, Journal of the mechanical behavior of biomedical materials.

Demonstrating a duplex TRIP/TWIP titanium alloy via the introduction of metastable retained β-phase

D. Fabrègue, A. Chiba, K. Yamanaka, 2022, Materials Research Letters.

Microstructure, Dislocation Density and Microhardness of 1%C-Doped Cocrfeni Complex Concentrated Alloys During Isochronal Annealing

Y. Onuki, P. Thirathipviwat, S. Sato, 2023, SSRN Electronic Journal.

Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy

J. Han, Y. Onuki, G. Song, 2022, Journal of Alloys and Compounds.

Characterization of Dislocation Rearrangement in FCC Metals during Work Hardening Using X-ray Diffraction Line-Profile Analysis

Shigeru Suzuki, Y. Onuki, K. Maki, 2020 .

Large tunable thermal expansion in ferroelastic alloys by stress

Qiao Li, Y. Onuki, A. Ahadi, 2022, Acta Materialia.

Elinvar property of cold-rolled NiTi alloy

Kangjie Chu, Qiao Li, Y. Onuki, 2020 .

Multifunctional nanostructured NiTi alloy with Invar, Elinvar and Rinvar properties

Qiao Li, Y. Onuki, Zhongzheng Deng, 2022, Journal of Alloys and Compounds.

High-Speed Rolling of AZ31 Magnesium Alloy Having Different Initial Textures

J. Szpunar, H. Utsunomiya, Y. Onuki, 2015, Journal of Materials Engineering and Performance.

Formation of {001} Fiber Texture in Fe-3mass%Si Alloy during Uniaxial Compression Deformation at Elevated Temperatures

Y. Onuki, H. Fukutomi, K. Okayasu, 2011 .

Texture development in Fe–3.0 mass% Si during high-temperature deformation: Examination of the preferential dynamic grain growth mechanism

Y. Onuki, H. Fukutomi, K. Okayasu, 2013 .

Grain growth in soft magnetic ferritic stainless steels under compressive stresses at high temperatures

T. Sato, M. Uchida, Y. Onuki, 2021 .

In-situ neutron diffraction investigation on the martensite transformation, texture evolution and martensite reversion in high manganese TRIP steel

P. Yang, Y. Onuki, Xinfu Gu, 2020 .

Microstructure Formation and Carbon Partitioning with Austenite Decomposition during Isothermal Heating Process in Fe-Si-Mn-C Steel Monitored by In Situ Time-of-Flight Neutron Diffraction

K. Fujiwara, T. Tomida, Y. Onuki, 2022, Metals.

In Situ Neutron Diffraction Measurement during Bainite Transformation and Accompanying Carbon Enrichment in Austenite at iMATERIA, J-PARC MLF

T. Tomida, Y. Onuki, T. Hirano, 2021 .

In-situ neutron diffraction study on a dislocation density in a correlation with strain hardening in Al–Mg alloys

M. Hasegawa, Y. Onuki, K. Matsumoto, 2022, Materials Science and Engineering: A.

Surface evolution and corrosion behaviour of Cu-doped carbide-reinforced martensitic steels in a sulfuric acid solution

A. Chiba, K. Yamanaka, M. Mori, 2021, npj Materials Degradation.

Nanocomposite NiTi shape memory alloy with high strength and fatigue resistance

P. Hua, Y. Onuki, Minglu Xia, 2021, Nature Nanotechnology.

Dislocation Density of Electron Beam Powder Bed Fusion Ti−6Al−4V Alloys Determined via Time-Of-Flight Neutron Diffraction Line-Profile Analysis

A. Chiba, K. Yamanaka, M. Mori, 2022, Metals.

Analysis of hierarchical microstructural evolution in electron beam powder bed fusion Ti–6Al–4V alloys via time-of-flight neutron diffraction

A. Chiba, K. Yamanaka, M. Mori, 2022, Additive Manufacturing Letters.

Rietveld Texture Analysis for Metals Having Hexagonal Close‐Packed Phase by Using Time‐of‐Flight Neutron Diffraction at iMATERIA

A. Hoshikawa, T. Ishigaki, Y. Onuki, 2018 .

Quantitative phase fraction analysis of steel combined with texture analysis using time-of-flight neutron diffraction

A. Hoshikawa, T. Ishigaki, T. Tomida, 2017, Journal of Materials Science.

Transformation textures in pure titanium: Texture memory vs surface effect

P. Yang, Y. Onuki, Xinfu Gu, 2020 .

In Situ Neutron Diffraction Investigating Microstructure and Texture Evolution upon Heating of Nanostructured CoCrFeNi High‐Entropy Alloy

K. Liss, S. Evlashin, M. Kawasaki, 2022, Advanced Engineering Materials.

In Situ Heating Neutron and X‐Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive‐Manufactured 316L Stainless Steel

K. Liss, S. Evlashin, Xiaojing Liu, 2021, Advanced Engineering Materials.

Depletion of Manganese in the Surface Layers of Fe-Mn-Si Shape Memory Alloys by Annealing

Shigeru Suzuki, K. Shinoda, S. Fujieda, 2015 .

Impact of Dislocation Density and Mobility on Yielding Behavior in Quenched Medium-carbon Martensitic Steel Tempered at Low Temperature

M. Kumagai, Y. Onuki, A. Tanabe, 2022 .

Improvement of Magnetostrictive Properties of Fe-15mol%Ga Alloy by Texture Formation during High Temperature Uniaxial Compression Deformation

Shigeru Suzuki, S. Fujieda, Y. Onuki, 2017 .

Development and verification of simultaneous measurement system for texture and phase fraction by time-of-flight neutron diffraction at iMATERIA

A. Hoshikawa, T. Ishigaki, T. Tomida, 2018, IOP Conference Series: Materials Science and Engineering.

Effect of matrix dislocation strengthening on deformation-induced martensitic transformation behavior of metastable high-entropy alloys

K. Yamanaka, M. Mori, Y. Onuki, 2023, Materials Research Letters.