Azam Jalali‐arani

发表

In situ synthesis of silica/polyacrylate nanocomposite particles simultaneously bearing carboxylate and sulfonate functionalities via soap-free seeded emulsion polymerization

H. Riazi, F. A. Taromi, Azam Jalali‐arani, 2018 .

Effect of pre-devulcanization and temperature on physical and chemical properties of waste tire pyrolytic oil residue

Azam Jalali‐arani, K. Shams, A. Kebritchi, 2013 .

A Comparison of the Effect of Silk Fibroin Nanoparticles and Microfibers on the Reprocessing and Biodegradability of PLA/PCL Blends

Masoud Dadras Chomachayi, Azam Jalali‐arani, J. Martínez Urreaga, 2021, Journal of Polymers and the Environment.

CRYSTALLINE STRUCTURES AND α → β AND γ POLYMORPHS TRANSFORMATION INDUCED BY NANOCLAY IN PVDF-BASED NANOCOMPOSITE

M. M. Abolhasani, M. Naebe, Q. Guo, 2014 .

Influence of Miscibility Phenomenon on Crystalline Polymorph Transition in Poly(Vinylidene Fluoride)/Acrylic Rubber/Clay Nanocomposite Hybrid

M. M. Abolhasani, M. Naebe, Q. Guo, 2014, PloS one.

The effect of silk fibroin nanoparticles on the morphology, rheology, dynamic mechanical properties, and toughness of poly(lactic acid)/poly(ε‐caprolactone) nanocomposite

Masoud Dadras Chomachayi, Azam Jalali‐arani, J. M. Urreaga, 2020 .

Morphology and rheology of (styrene-butadiene rubber/acrylonitrile-butadiene rubber) blends filled with organoclay: The effect of nanoparticle localization

A. Monfared, Azam Jalali‐arani, 2015 .

Preparation of binary and hybrid epoxy nanocomposites containing graphene oxide and rubber nanoparticles: Fracture toughness and mechanical properties

Azam Jalali‐arani, Mahdi Mehrabi‐Kooshki, 2018, Journal of Applied Polymer Science.

Cold crystallization behavior of poly(lactic acid) in its blend with acrylic rubber; the effect of acrylic rubber content

Azam Jalali‐arani, M. Hesami, 2017 .

The use of gamma irradiation in preparation of polybutadiene rubber nanopowder; Its effect on particle size, morphology and crosslink structure of the powder

Azam Jalali‐arani, M. R. Abadchi, 2014 .

High performance graphene oxide/epoxy nanocomposites fabricated through the solvent exchange method

Azam Jalali‐arani, Mahdi Mehrabi Kooshki, 2018 .

Investigation of miscibility and phase structure of a novel blend of poly(lactic acid) (PLA)/acrylic rubber (ACM) and its nanocomposite with nanosilica

Azam Jalali‐arani, M. Hesami, 2017 .

Biodegradable Nanocomposites Developed from PLA/PCL Blends and Silk Fibroin Nanoparticles: Study on the Microstructure, Thermal Behavior, Crystallinity and Performance

Masoud Dadras Chomachayi, M. U. de la Orden, Azam Jalali‐arani, 2020, Journal of Polymers and the Environment.

High-performance bio-based poly(lactic acid)/natural rubber/epoxidized natural rubber blends: effect of epoxidized natural rubber on microstructure, toughness and static and dynamic mechanical properties

H. Modarress, Azam Jalali‐arani, M. Nematollahi, 2018, Polymer International.

Synergistic effects of nano-scale polybutadiene rubber powder (PBRP) and nanoclay on the structure, dynamic mechanical and thermal properties of polypropylene (PP)

Azam Jalali‐arani, M. Rezaei Abadchi, 2015, Iranian Polymer Journal.

Crystallization and melting behavior of polypropylene (PP) in (vulcanized nanoscale polybutadiene rubber powder/PP) polymer-nanocomposites

Azam Jalali‐arani, M. R. Abadchi, 2015 .

Morphology Development via Static Crosslinking of (Polylactic Acid/Acrylic Rubber) as an Immiscible Polymer Blend

Azam Jalali‐arani, M. Hesami, 2018 .

Poly(vinylidene fluoride)-acrylic rubber partially miscible blends: Crystallization within conjugated phases induce dual lamellar crystalline structure

M. M. Abolhasani, H. Nazockdast, Q. Guo, 2013 .

The relationship of vulcanization and structural characteristics‐dispersion of organoclay‐mechanical properties in (butadiene rubber/natural rubber) based nanocomposite

A. Zarei, Azam Jalali‐arani, 2018 .

Rheological behavior and properties of bitumen modified with polymeric coated precipitated calcium carbonate

Azam Jalali‐arani, A. Kebritchi, A. Roghanizad, 2011 .

Effect of nanoparticle localization on the rheology, morphology and toughness of nanocomposites based on poly(lactic acid)/natural rubber/nanosilica

H. Modarress, Azam Jalali‐arani, M. Nematollahi, 2019, Polymer International.

Organoclay maleated natural rubber nanocomposite. Prediction of abrasion and mechanical properties by artificial neural network and adaptive neuro-fuzzy inference

Karim Golzar, Azam Jalali‐arani, M. Nematollahi, 2014 .

Nanocomposites based on natural rubber, organoclay and nano-calcium carbonate: Study on the structure, cure behavior, static and dynamic-mechanical properties

H. Ghari, Azam Jalali‐arani, 2016 .

The Effect of Epoxidized Natural Rubber and Two Kinds of Organoclay upon Molecular Interaction, Structure and Mechanical Properties of (Styrene-Butadiene Rubber/Acrylonitrile-Butadiene Rubber/Organoclay) Nanocomposites

N. Mohammadi, A. Monfared, Azam Jalali‐arani, 2014 .

Influence of addition of organic fillers on the properties of mechanically recycled PLA

Masoud Dadras Chomachayi, J. L. Cenis, Azam Jalali‐arani, 2020, Environmental Science and Pollution Research.

A morphological study on the migration and selective localization of graphene in the PLA/PMMA blends

Azam Jalali‐arani, A. Arefazar, Azin Paydayesh, 2016 .

Investigation of nanoparticle–polymer interaction in bio-based nanosilica-filled PLA/NR nanocomposites: molecular dynamics simulation

H. Modarress, Karim Golzar, Azam Jalali‐arani, 2020, Journal of Molecular Modeling.

High performance bio-based PLA / NR / ENR blend ; Effect of ENR on microstructure , toughness , static and dynamic mechanical properties Running Title : Microstructure and properties of PLA / NR / ENR blend

H. Modarress, Azam Jalali‐arani, M. Nematollahi, 2018 .

The use of waste rubber in natural rubber in the presence of maleic anhydride-grafted natural rubber (MA-g-NR): study on curing, rheology, morphology, and properties of the blend

Azam Jalali‐arani, M. Nematollahi, 2014 .

Rheological analysis of bitumen modified by reclaim rubber pyrolytic oil residue

Kayghobad Shams, Azam Jalali‐arani, A. Kebritchi, 2022, Journal of Petroleum Science and Engineering.

Double percolated MWCNTs loaded PC/SAN nanocomposites as an absorbing electromagnetic shield

H. Nazockdast, V. Nayyeri, Hasti Bizhani, 2018 .

A comparison between the effects of gamma radiation and sulfur cure system on the microstructure and crosslink network of (styrene butadiene rubber/ethylene propylene diene monomer) blends in presence of nanoclay

Azam Jalali‐arani, Aida Shoushtari Zadeh Naseri, 2015 .

Thermomechanical reactive blending of silicone rubber and LLDPE: Effects of processing parameters

H. Nazockdast, A. Katbab, Azam Jalali‐arani, 2005 .

Rheological Analysis of Bitumen Modified by Waste Tire Powder Pyrolytic Oil Residue

Kayghobad Shams, Azam Jalali‐arani, A. Kebritchi, 2022, International Journal of Pavement Research and Technology.

Study on the morphology, static and dynamic mechanical properties of (styrene butadiene rubber/ethylene propylene diene monomer/organoclay) nanocomposites vulcanized by the gamma radiation

Azam Jalali‐arani, Aida Shoushtari Zadeh Naseri, 2016 .

Statistical investigation on physical–mechanical properties of base and polymer modified bitumen using Artificial Neural Network

Karim Golzar, Karim Golzar, Azam Jalali-Arani, 2012 .

Electrical conductivity of graphene filled PLA/PMMA blends: Experimental investigation and modeling

Azam Jalali‐arani, A. A. Azar, Azin Paydayesh, 2019 .