D. Chicet

发表

Experimental Equipment for Damping Capacity Analyze of High or Low Internal Friction Metallic Materials

R. Crăciun, N. Cimpoesu, S. Stanciu, 2017 .

APPLICATIONS OF CERAMIC COATINGS AS TBCs ON THE INTERNAL COMBUSTION ENGINE VALVES

C. Munteanu, B. Istrate, D. Chicet, 2018 .

AN EXPERIMENTAL UNSTANDARDIZED METHOD FOR TESTING THE SLURRY EROSIVE WEAR OF THERMAL SPRAYED COATINGS

Marius, C. Munteanu, B. Istrate, 2019 .

Structural aspects and chemical analyses on cutting process of metallic-ceramic materials

I. Ioniță, M. Coteaţă, N. Cimpoesu, 2021 .

Increasing Wear Resistance of Power Steering Pump Cam Using Ni-Cr-Fe and Ni-Cr-Fe-B Coatings

C. Munteanu, B. Istrate, M. Benchea, 2017 .

Zinc oxide-linen fibrous composites: morphological, structural, chemical and humidity adsorptive attributes

A. Pui, C. Hristodor, D. Coman, 2012 .

Thermal Behavior of Mechanically Alloyed Powders Used for Producing an Fe-Mn-Si-Cr-Ni Shape Memory Alloy

C. Munteanu, L. Bujoreanu, B. Pricop, 2012, Journal of Materials Engineering and Performance.

Influence of ZrO2-Y2O3 and ZrO2-CaO coatings on microstructural and mechanical properties on Mg-1,3Ca- 5,5Zr biodegradable alloy

Bogdan Istrate, Corneliu Munteanu, D L Chicet, 2016 .

Expanded glass spheres applications for low thermal transfer

B. Istrate, D. Chicet, C. Munteanu, 2021, IOP Conference Series: Materials Science and Engineering.

Obtaining of High Cr Content Cast Iron Materials

I. Carcea, C. Bejinariu, N. Cimpoesu, 2017 .

Preliminary Results on Microstructural, Chemical and Wear Analyze of New Cast Iron with Chromium Addition

I. Carcea, V. Paleu, C. Bejinariu, 2015 .

Investigation of thermal coating influence on the fire resistance of a multi-layer material

B. Istrate, D. Chicet, C. Micu, 2019, IOP Conference Series: Materials Science and Engineering.

Analysis of water jet cutting of metal-ceramic elements made through atmospheric plasma spraying technique

M. Cazacu, C. Munteanu, N. Cimpoesu, 2022, Materials Today: Proceedings.

Metallic materials for mechanical damping capacity applications

R. Crăciun, S. Stanciu, D. Chicet, 2016 .

3D Printer-Manufacturing of Complex Geometry Elements

D L Chicet, Mihai Axinte, A Ciubară, 2018, IOP Conference Series: Materials Science and Engineering.

Optimization of Alkaline Extraction of Xylan-Based Hemicelluloses from Wheat Straws: Effects of Microwave, Ultrasound, and Freeze–Thaw Cycles

M. Danu, E. Drăgoi, A. Puițel, 2023, Polymers.

Hard Alloys with High Content of WC and TiC—Deposited by Arc Spraying Process

V. Paleu, C. Bejinariu, D. Chicet, 2020 .

Expanded Foam Glass - an Application for Fire Resistant Multilayer Materials

C. Munteanu, B. Istrate, D. Chicet, 2020, IOP Conference Series: Materials Science and Engineering.

Study of the wear behavior of bronze coatings deposited by the EAS method

I. Doroftei, C. Munteanu, B. Istrate, 2022, Journal of Engineering Sciences and Innovation.

Synthesis of SnO2 by Sol-Gel Method

I. Carcea, D. Chicet, I. Palamarciuc, 2016 .

Influence of the Stand-off Distance and of the Layers Thickness on the Adhesion and Porosity of the 97MXC Deposits Obtained by Arc Spraying Process

C. Bejinariu, D. Chicet, S. Toma, 2020, IOP Conference Series: Materials Science and Engineering.

Microstructural analysis, evaluation of the adhesion and utilization properties of plasma coatings on alloy steel substrate

C. Munteanu, D. Chicet, C. Stescu, 2019, Materials Today: Proceedings.

Corrosion behavior aspects of Ni-base self-fluxing coatings

B. Istrate, D. Chicet, M. Panțuru, 2016 .

Microstructural aspects at coating-substrate interface for some thermal sprayed layers on valve discs

B. Istrate, D. Chicet, M. Panțuru, 2018, IOP Conference Series: Materials Science and Engineering.

The Simulation of Point Contact Stress State for APS Coatings

D. Chicet, M. Panțuru, A. Tufescu, 2017 .

Machining of thermal sprayed coatings – a case study for self-fluxing powder

C. Croitoru, D. Chicet, C. Stescu, 2019, IOP Conference Series: Materials Science and Engineering.

Comparative Rolling Contact Behavior of Two APS Coatings with Different Matrix

C. Bejinariu, D. Chicet, S. Toma, 2023, Archives of Metallurgy and Materials.

Contact stress simulation problem in case of thermal spray coatings

C. Munteanu, B. Istrate, D. Chicet, 2020, IOP Conference Series: Materials Science and Engineering.

Behavior of multilayer materials when exposed to open flame

C. Munteanu, B. Istrate, D. Chicet, 2019, Materials Today: Proceedings.

Wear aspects of internal combustion engine valves

Corneliu Munteanu, A Alexandru, Constantin Paulin, 2016 .

INNOVATIVE CHARACTER OF PLASMA SPRAY DEPOSITION METHOD

C. Munteanu, D. Chicet, Geanina Laura Pintilei, 2011 .

Chromium Addition Effect on Wear Properties of Cast-Iron Material

Costica Bejinariu, Viorel Paleu, D L Chicet, 2015 .

Substrate Texture Influence on the Dry Sliding Wear Behaviour of Co-Based Plasma Spray Coating

D. Chicet, C. Stescu, C. Paleu, 2023, Archives of Metallurgy and Materials.