A. Davis

发表

The evolution of abnormally coarse grain structures in β-annealed Ti-6Al%-4V% rolled plates, observed by in-situ investigation

P. Prangnell, J. Donoghue, N. Byres, 2021, Acta Materialia.

Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by wire-arc additive manufacture

P. Prangnell, Jialuo Ding, F. Martina, 2019, Materials Science and Engineering: A.

The effect of processing parameters on rapid-heating β recrystallization in inter-pass deformed Ti-6Al-4V wire-arc additive manufacturing

P. Prangnell, Jialuo Ding, A. Davis, 2020, Materials Characterization.

Analysis of the Development of Abnormal Grains Structures During Beta Annealing of Ti-64 Wrought Products

J. Q. D. Fonseca, J. Donoghue, N. Byres, 2020, MATEC Web of Conferences.

Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V Built With Inter-Pass Deformation

S. Williams, A. Davis, P. Prangnell, 2022, Metallurgical and Materials Transactions A.

Intrinsic mechanical and interfacial characteristics of precipitates contributing to the room and elevated temperature strength in Mg-Sn-Y alloys

Bo Jiang, Q. Yang, A. Davis, 2021, Journal of Materials Research and Technology.

Achieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloys

Ying Zeng, Xiaoying Qian, K. Sun, 2022, Journal of Alloys and Compounds.

Microstructural characterisation and mechanical properties of Ti-5Al-5V-5Mo-3Cr built by wire and arc additive manufacture

P. Prangnell, A. Davis, J. Fellowes, 2022, Philosophical Magazine.

Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis

P. Prangnell, F. Martina, J. Hönnige, 2020 .

The potential for grain refinement of Wire-Arc Additive Manufactured (WAAM) Ti-6Al-4V by ZrN and TiN inoculation

P. Prangnell, E. Pickering, A. Davis, 2021, Additive Manufacturing.

Microstructure transition gradients in titanium dissimilar alloy (Ti-5Al-5V-5Mo-3Cr/Ti-6Al-4V) tailored wire-arc additively manufactured components

E. Pickering, M. White, A. Davis, 2021, Materials Characterization.

CALPHAD-informed phase-field model for two-sublattice phases based on chemical potentials: η-phase precipitation in Al-Zn-Mg-Cu alloys

P. Prangnell, D. Raabe, P. Shanthraj, 2021, Acta Materialia.

On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing

Hao Zhao, Filomeno Martina, Philip B. Prangnell, 2019, Acta Materialia.

The effect of multiple precipitate types and texture on yield asymmetry in Mg-Sn-Zn(-Al-Na-Ca) alloys

J. Robson, A. Davis, M. Turski, 2018, Acta Materialia.

Preageing of magnesium alloys

J. Robson, D. Lunt, A. Davis, 2021 .

Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour

A. Davis, Joseph D. Robson, 2017 .

Discontinuous precipitation in Mg-Al alloy studied in 3-dimensions

J. Robson, J. Donoghue, A. Davis, 2023, Scripta Materialia.

In-situ observation of single variant α colony formation in Ti-6Al-4V

J. Donoghue, N. Byres, A. Davis, 2021, Acta Materialia.

β Grain Refinement by Yttrium Addition in Ti-6Al-4V Wire-Arc Additive Manufacturing

S. Williams, E. Pickering, N. Byres, 2021, Journal of Alloys and Compounds.

The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V

P. Prangnell, F. Martina, D. Lunt, 2020 .

Tailoring Equiaxed β-grain Structures in Ti-6Al-4V Coaxial Electron Beam Wire Additive Manufacturing

S. Porter, A. Davis, P. Prangnell, 2021 .

On the observation of annealing twins during simulating β-grain refinement in Ti–6Al–4V high deposition rate AM with in-process deformation

J. Quinta da Fonseca, J. Donoghue, J. Donoghue, 2020 .

The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V

P. Prangnell, S. Williams, J. Hönnige, 2020, Metallurgical and Materials Transactions A.

Isomorphic grain inoculation in Ti-6Al-4V during additive manufacturing

J. Zollinger, E. Pickering, E. Bouzy, 2020 .

Automated image mapping and quantification of microstructure heterogeneity in additive manufactured Ti6Al4V

Philip Prangnell, Hao Zhao, P. Prangnell, 2019, Materials Characterization.

Reducing yield asymmetry and anisotropy in wrought magnesium alloys – A comparative study

J. Robson, A. Davis, M. Turski, 2019, Materials Science and Engineering: A.

Modelling the Effect of Deformation on Discontinuous Precipitation in Magnesium—Aluminium Alloy

J. Robson, A. Davis, Jiaxuan Guo, 2022, Alloys.

Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading

F. Martina, J. Hönnige, D. Lunt, 2020, MATEC Web of Conferences.

β grain refinement during solidification of Ti-6Al-4V in Wire-Arc Additive Manufacturing (WAAM)

E. Pickering, A. Davis, P. Prangnell, 2023, IOP Conference Series: Materials Science and Engineering.

Effect of deposition strategies on fatigue crack growth behaviour of wire + arc additive manufactured titanium alloy Ti–6Al–4V

P. Prangnell, F. Martina, A. Davis, 2021 .