J. Escobedo-Diaz

发表

Mechanical Properties and Behavior of Additive Manufactured Stainless Steel 316L

P. Hazell, A. Ameri, A. D. Brown, 2017 .

Microstructure Evolution of Additively Manufactured TiC Reinforced Graded Metal Matrix Composite

E. Morozov, Kun Yang, D. East, 2020 .

Tensile properties of ultra-high-molecular-weight polyethylene single yarns at different strain rates

P. Hazell, Hongxu Wang, E. Morozov, 2020, Journal of Composite Materials.

General methodology to estimate the dislocation density from microhardness measurements

M. Ashraf, A. Ameri, J. Escobedo-Diaz, 2017 .

Dimensional Quantification of Embedded Voids or Objects in Three Dimensions Using X-Ray Tomography

E. Cerreta, B. Patterson, J. Escobedo-Diaz, 2012, Microscopy and Microanalysis.

The mechanical response of commercially available bone simulants for quasi-static and dynamic loading.

M. Saadatfar, P. Hazell, P. Hazell, 2019, Journal of the mechanical behavior of biomedical materials.

Effect of initiator geometry on energy absorption of CFRP tubes under dynamic crushing

L. Ye, Yuan Chen, J. Escobedo-Diaz, 2020, International Journal of Crashworthiness.

Characterization of Minerals, Metals, and Materials 2018

J. Carpenter, D. Firrao, Y. E. Kalay, 2018 .

Estimation of Dislocation Density in Metals from Hardness Measurements

P. Hazell, M. Ashraf, A. Ameri, 2017 .

Effects of load partitioning and texture on the plastic anisotropy of duplex stainless steel alloys under quasi-static loading conditions

M. Ashraf, A. Ameri, C. Logos, 2019, Materials Science and Engineering: A.

Characterization of Minerals, Metals, and Materials 2020

J. Carpenter, Y. E. Kalay, Jiann-Yang Hwang, 2020 .

Microstructural Characterisation of a High Strength Steel Subjected to Localised Blast Loading

A. Ameri, H. Bornstein, S. Higgs, 2019, The Minerals, Metals & Materials Series.

Characterization of Minerals, Metals, and Materials 2017

J. Carpenter, D. Firrao, Y. E. Kalay, 2017 .

Effect of loading direction on grain boundary failure under shock loading

T. Germann, G. Gray, E. Cerreta, 2014 .

Microstructural Characterisation of AA5083 in AA5083/SiC Co-Continuous Ceramic Composites (C4) Fabricated by Gravity and Gas Pressure Infiltration

Jiansheng Wang, K. Shankar, V. Krishnaraj, 2022, Characterization of Minerals, Metals, and Materials.

Modified Green-Lindsay thermoelasticity wave propagation in elastic materials under thermal shocks

Masud Behnia, Maryam Ghodrat, Farshad Shakeriaski, 2020, J. Comput. Des. Eng..

Recent advances in generalized thermoelasticity theory and the modified models: a review

Masud Behnia, Maryam Ghodrat, Farshad Shakeriaski, 2021, J. Comput. Des. Eng..

Microstructure and hardness variation of additively manufactured Ti–Ni–C functionally graded composites

A. Seeber, E. Morozov, D. East, 2021 .

Study on inlet pressure and Reynolds number in pressure-swirl atomizer with spiral path

M. Ghodrat, Milad Heidari, Kiumars Khani Aminjan, 2022, International Communications in Heat and Mass Transfer.

Methodology for Determining Spall Damage Mode Preference in Shocked FCC Polycrystalline Metals from 3D X-Ray Tomography Data

Xianghui Xiao, E. Cerreta, P. Peralta, 2016 .

Effect of grain boundary structure on plastic deformation during shock compression using molecular dynamics

E. Cerreta, S. Valone, S. Fensin, 2012 .

Compressive Properties of Additively Manufactured Titanium-Carbide

A. Ameri, Hongxu Wang, J. Escobedo-Diaz, 2021 .

Stability of the two-phase (α/ω) microstructure of shocked zirconium

Levente Balogh, Bjørn Clausen, Thomas A. Sisneros, 2014 .

Characterization of Minerals, Metals, and Materials 2016

J. Carpenter, D. Firrao, Jiann-Yang Hwang, 2016 .

Ferrite phase transformation in dual-phase steel under shock loading

P. Hazell, A. Ameri, W. Rickard, 2021, Materials Science and Engineering: A.

Spall strength dependence on peak stress and deformation history in Lean Duplex Stainless Steel 2101

P. Hazell, A. Ameri, Hongxu Wang, 2021, Materials Science and Engineering: A.

Impact Resistance and Yarn Pull-Out Behaviour of Polymer Spray-Coated UHMWPE Fabrics

D. Mohotti, P. Hazell, Hongxu Wang, 2022, Materials Today Communications.

Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels

P. Hazell, Hongxu Wang, B. Aryal, 2019, Composite Structures.

Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations

D. Mohotti, P. Hazell, Hongxu Wang, 2022, Defence Technology.

Microstructural changes and in-situ observation of localization in OFHC copper under dynamic loading

G. Gray, E. Cerreta, G. Ravichandran, 2015 .

Numerical and experimental investigation to design a novel morphing airfoil for performance optimization

M. Ghodrat, Milad Heidari, J. Escobedo-Diaz, 2023, Propulsion and Power Research.

Effects of impactor mass on the low-velocity impact behaviour of thick GFRP pultruded laminates

P. Hazell, A. Ameri, Hongxu Wang, 2021 .

Quasi-static and dynamic progressive crushing of CF/EP composite sandwich panels under in-plane localised compressive loads

L. Ye, Kunkun Fu, Yuan Chen, 2019, Composite Structures.

Dynamic mechanical response and fracture behaviour of Ti–Ni–C composites fabricated by directed energy deposition

P. Hazell, Hongxu Wang, E. Morozov, 2023, Materials Science and Engineering: A.