Kimiyuki Mitsui

发表

Measuring Method for Circular Movement of NC Machine Tools by Link Mechanism. Measuring Principle and Experimental Results.

Myeongseok Kang, Satoshi Hasegawa, Kimiyuki Mitsui, 1996 .

Measurement of Clearance in Micro Punch Press using Image Processing Techniques.

Kimiyuki Mitsui, Yusuke Okada, Yoshiyuki Kibe, 2004 .

A study on accuracy diagnosis (The relation ship between the error motion of a machine tool spindle and the roundness profile of finished parts)

Kimiyuki Mitsui, 1986 .

Development of a Measuring Apparatus for Shape and Dimension of Micro-components : Introduction of a Dual Servo Measurement System

Satoshi Yoshida, Kimiyuki Mitsui, Yuki Kinebuchi, 2004 .

Image Processings System for Expanding Depth of Focus of Optical Microscope. Composition of Expanded Depth of Focus Image and Three Dimensional Expression of Shape.

Kimiyuki Mitsui, Toshiharu Shiraishi, 1994 .

Effect of low-frequency vibration on workpiece in EDM processes

Kimiyuki Mitsui, Muslim Mahardika, Gunawan Setia Prihandana, 2011 .

Development of a new displacement-measuring ultrasonic sensor based on astigmatic focus error detection-measuring principle and its demonstration

Kimiyuki Mitsui, Makoto Koike, Tsukamoto Hidehiko, 1997 .

In-process measurement and workpiece-refered form accuracy control. (1st report). Concept of the method and preliminary experiment.

Yuichi Okazaki, Kimiyuki Mitsui, Tsuguo Kohno, 1988 .

Development of an Optical Measuring Device for Rotation Accuracy of Micro-Spindle

Kimiyuki Mitsui, Kengo Fujimaki, 2006 .

321 Development of a Measuring Method for Motion Accuracy of NC Machine Tools using Links and Rotary Encoders : Error Parameters Estimation and the Results of Measurement Experiments

Kimiyuki Mitsui, Hiroaki Iwai, Kenichiro Fujino, 2006 .

Machining accuracy for shearing process of thin-sheet metals—Development of initial tool position adjustment system

Kimiyuki Mitsui, Yoshiyuki Kibe, Yusuke Okada, 2007 .

Automatic Recognition for the Bearing of Scraped Surfaces by Image Processing Techniques

Kimiyuki Mitsui, Kazumasa Nomura, Takeshi Ohkuma, 1992 .

Effects of sensor noise in digital signal processing of the three-point method

Kimiyuki Mitsui, Kengo Fujimaki, Hiroshi Sase, 2008 .

Development of Measurement Method for Shape and Dimension of Micro-Components

Kimiyuki Mitsui, Toshiya Shiramatsu, Kenichi Kitano, 2004 .

Sensor Fusion Strategy in the Monitoring of Cutting Tool Wear

Hideki Aoyama, Zahari Taha, Djoko Suharto, 2006 .

A New Ultrasonic Sensor for Displacement Measurement Based on Astigmatic Focus Error Detection. Measuring Principle and Its Demonstration.

Kimiyuki Mitsui, Makoto Koike, Hidehiko Tsukamoto, 1995 .

On-Machine Optical Surface Profile Measuring System for Nano-Machining

Kimiyuki Mitsui, Hayato Yoshioka, Hidenori Shinno, 2011, Int. J. Autom. Technol..

Probe를 이용한 미세부품의 형상·치수 측정기술

Kimiyuki Mitsui, Jun Goda, 2008 .

Studies on fabrication system of ultra-precision metal mirrors. Workpiece fixturing methods for ultra-precision machining.

Kimiyuki Mitsui, Hidenori Shinno, 1985 .

Development of a Measuring Method for Motion Accuracy of NC Machine Tools Using Links and Rotary Encoders (Modification to the Measuring System, Error Parameters Estimation and the Results of Measurement Experiments)

Kimiyuki Mitsui, Akira Hayashi, Hiroaki Iwai, 2007 .

A new method for monitoring micro-electric discharge machining processes

Kimiyuki Mitsui, Muslim Mahardika, M. Mahardika, 2008 .

The Current Methods for Improving Electrical Discharge Machining Processes

Kimiyuki Mitsui, Muslim Mahardika, Gunawan Setia Prihandana, 2009 .

Development of a Roundness Profile Measurement System for Parallel Rollers based on a V-Block Method.

Kimiyuki Mitsui, Akira Hayashi, Kenji Goho, 1998 .

Development of an integrated apparatus of micro-EDM and micro-CMM

Kimiyuki Mitsui, Jun Goda, K. Mitsui, 2013 .

210102 Development of an integrated apparatus of μEDM and μ3D-CMM

Kimiyuki Mitsui, Jun Goda, 2011 .

Radial error measuring device based on auto-collimation for miniature ultra-high-speed spindles

Kimiyuki Mitsui, Kengo Fujimaki, K. Mitsui, 2007 .

210103 Development of Measuring Device for Motion Accuracy of NC Machine Tools by Rotary Encoders and Link Mechanisms(RELM)

Kimiyuki Mitsui, Hiroki Miyake, Kiyofumi Kato, 2011 .

Precision machining by discharge pulse counting methods in micro EDM processes

Kimiyuki Mitsui, Muslim Mahardika, Gunawan Setia Prihandana, 2012 .

A Circular Profile Measurement Method Using Software Techniques

Kimiyuki Mitsui, Eiki Okuyama, 2005 .

Profile Measurement of Parallel Rollers based on a V-Block Method. Mass Measurement and Evaluation of 1200 rollers.

Kimiyuki Mitsui, Akira Hayashi, Kenji Goho, 1999 .

Miniature tilting mechanism using piezoelectric actuators

Kimiyuki Mitsui, Takayuki Goto, Satoshi Tawara, 1995, Other Conferences.

Development of a measuring method for motion accuracy of NC machine tools using links and rotary encoders

Kimiyuki Mitsui, Hiroaki Iwai, 2009 .

Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes—Taguchi approach

Kimiyuki Mitsui, Yoke San Wong, Mohd Hamdi, 2009 .

Study of workpiece vibration in powder-suspended dielectric fluid in micro-EDM processes

Norihisa Miki, Kimiyuki Mitsui, Mohd Hamdi, 2013 .

Study on a Stylus Profiling Instrument Based on a Fine and Coarse Dual-Servo Mechanism. Measuring Principle and a Few Measurement Results.

Kimiyuki Mitsui, K. Mitsui, Takeshi Kumada, 1997 .

Development of an in-Process Sensor for Surface Roughness by Laser Beam

Hisayoshi Sato, Kimiyuki Mitsui, 1976 .

Development of an Optical Measuring Device for Rotation Accuracy of Micro-Spindle —Application to Measurements of a High-Speed Spindle—

Kimiyuki Mitsui, Kengo Fujimaki, K. Mitsui, 2007 .

Development of Three Dimensional Profile Measuring Apparatus for Microparts. Measuring Principle and Measuring Results.

Kimiyuki Mitsui, Toshiharu Shiraisiii, 1998 .

The parameters evaluation and optimization of polycrystalline diamond micro-electrodischarge machining assisted by electrode tool vibration

Kimiyuki Mitsui, Takayuki Tsujimoto, Gunawan Setia Prihandana, 2012 .

Fabrication of Probes for Profile Measurement of Microcomponents by Micro-EDM (Microprobe Fabrication Methods and Effect of Vibration Assisted Micro-EDM on Machining Time)

Kimiyuki Mitsui, Masayoshi Kawada, Takashi Endo, 2005 .

FABRICATION OF MICRO-COMPONENTS USING VIBRATION-ASSISTED MICRO-EDM

Kimiyuki Mitsui, Takayuki Tsujimoto, Takashi Endo, 2006 .

A New Measuring Method for Spindle Error Motion Using a Cube-Corner Prism and Laser Interferometers

Kimiyuki Mitsui, Y. Okazaki, Norimitu Ozawa, 1990 .

A new approach on the determination of ease of machining by EDM processes

Kimiyuki Mitsui, Takayuki Tsujimoto, Muslim Mahardika, 2008 .

Effect of micro MoS 2 powder mixed dielectric fluid on surface quality and material removal rate in micro-EDM processes

Kimiyuki Mitsui, Mohd Hamdi, Gunawan Setia Prihandana, 2009 .

New analytical method for V-block three-point method

Kimiyuki Mitsui, Eiki Okuyama, Kenji Goho, 2003 .

Development of a new measurement system for straightness error by a heterodyne interferometer with a grating

Kimiyuki Mitsui, Shin Asano, Takayuki Goto, 2002 .

Development of Dual Servo STM.

Kimiyuki Mitsui, Takayuki Goto, Akinobu Nakamura, 1996 .

Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes

Kimiyuki Mitsui, Mohd Hamdi, Y. S. Wong, 2011 .

Development Of A High Resolution Sensor For Surface Roughness

Kimiyuki Mitsui, Yoshitsugu Kizuka, M. Sakai, 1988 .

The Application of Powder Suspended Dielectric Fluid in Micro-EDM Processes to Reduce Machining Time

Kimiyuki Mitsui, Mohd Hamdi, Gunawan Setia Prihandana, 2009 .