S. K. Nayak

发表

Multi-Stage Recycling Induced Morphological Transformations in Solid-State Microcellular Foaming of Polystyrene

S. Mohanty, M. Biswal, Indrajeet Singh, 2018 .

Cold crystallization kinetics of biodegradable polymer blend; controlled by reactive interactable and nano nucleating agent

S. Mohanty, P. J. Jandas, S. K. Nayak, 2018, Advanced Composites and Hybrid Materials.

Decomposed Copper(II) Acetate Over Expanded Graphite (EG) as Hybrid Filler to Fabricate Epoxy Based Thermal Interface Materials (TIMs)

S. Mohanty, S. Nayak, S. K. Nayak, 2019, Journal of Electronic Materials.

Fundamental and innovative approaches for filler design of thermal interface materials based on epoxy resin for high power density electronics application: a retrospective

S. Mohanty, S. Nayak, S. K. Nayak, 2020, Multiscale and Multidisciplinary Modeling, Experiments and Design.

Two-different ways of synthesis for EG: Study of mechanical, thermal, and electrical properties of epoxy composite for TIMs

S. K. Nayak, Jyoti Agarwal, Arjyama Mishra, 2020 .

Fabrication of high thermal conductive epoxy composite by adding hybrid of expanded graphite, iron (III) oxide, and silver flakes

Rajesh Kumar, S. K. Nayak, 2020, Journal of Materials Science: Materials in Electronics.

Silver (Ag) nanoparticle-decorated expanded graphite (EG) epoxy composite: evaluating thermal and electrical properties

S. Mohanty, S. Nayak, S. K. Nayak, 2019, Journal of Materials Science: Materials in Electronics.

Investigation on the Structural and Magnetic Properties of a Polymer Composite: Polyaniline/Cr2O3

K. Bhuvana, K. Palanivelu, S. K. Nayak, 2012 .

A new way synthesis of expanded graphite as a thermal filler to enhance the thermal conductivity of DGEBA resin as thermal interface material

S. Nayak, S. K. Nayak, S. Mohanty, 2020, High Performance Polymers.

Silver nanoparticles decorated α-alumina as a hybrid filler to fabricate epoxy-based thermal conductive hybrid composite for electronics packaging application

S. K. Nayak, D. Mohanty, 2020 .

Evaluation of intercalation and interaction in in-situ polymerized PLA-HNT bionanocomposites:

S. Nayak, S. K. Nayak, P. S. G. Krishnan, 2020 .

Thermal, Electrical and Mechanical Properties of Expanded Graphite and Micro-SiC Filled Hybrid Epoxy Composite for Electronic Packaging Applications

S. Mohanty, S. Nayak, S. K. Nayak, 2019, Journal of Electronic Materials.

Study on thermal conductive epoxy adhesive based on adopting hexagonal boron nitride/graphite hybrids

R. Kumar, S. Mohanty, S. Nayak, 2018, Journal of Materials Science: Materials in Electronics.

Thermal Conductivity Enhancement of Epoxy Composite Based on Hybrid BN and Graphite Particulate Conductive Fillers and Effect of Hybrid Sample Thickness ( t ) and Filler Fraction on Thermal Resistance ( R ) and Thermal Conductivity ( k )

R. Kumar, S. Mohanty, S. Nayak, 2018 .

Nucleation effect of surface treated TiO2 on Poly(trimethylene terephthalate) (PTT) nanocomposites

S. Mohanty, V. Ramesh, B. P. Panda, 2013 .

State of the art and future prospectives of poly(lactic acid) based blends and composites

H. Deka, T. Varghese, S. K. Nayak, 2018 .

Zeolite Synthesis from Waste and its Applications: A Retrospective

S. K. Nayak, S. Mohanty, 2019 .

Recent development and future trends in coir fiber reinforced green polymer composites: Review and evaluation

H. Deka, S. Nayak, T. Varghese, 2016 .

Effect of morphology and hydroxyl groups of different nanoparticles on the properties of PLA bionanocomposites

S. K. Nayak, P. S. G. Krishnan, M. P, 2020 .

In-situ polymerised PLA-SEP bionanocomposites: effect of silanol groups on the properties of PLA

S. K. Nayak, P. S. G. Krishnan, P. Manju, 2020, Journal of Polymer Research.

Synthesis of dialkyl 2-(Methacryloyloxyethyl) phosphonates, their characterization and polymerization

K. Rajalakshmi, S. K. Nayak, P. S. G. Krishnan, 2015, Polymer Science Series B.

Novel low‐cost jute–polyester composites. III. Weathering and thermal behavior

B. Dash, A. K. Rana, H. Mishra, 2000 .

Studies on thermal degradation and flame retardant behavior of the sisal fiber reinforced unsaturated polyester toughened epoxy nanocomposites

S. Mohanty, S. Nayak, S. K. Nayak, 2015 .

Influence of addition of vapor grown carbon fibers on mechanical, thermal and biodegradation properties of lignin nanoparticle filled bio-poly(trimethylene terephthalate) hybrid nanocomposites

S. Mohanty, A. Gupta, S. K. Nayak, 2015 .

Morphological evaluation of ultra low-density poly (methyl methacrylate) microcellular plastic developed through cyclic foaming technique

S. Mohanty, A. Gandhi, S. K. Nayak, 2019, International Journal of Materials Engineering Innovation.

Poly(lactic acid) and layered silicate nanocomposites prepared by melt mixing: Thermomechanical and morphological properties

S. Mohanty, S. Nayak, S. K. Nayak, 2012 .

Polypropylene nanocomposite film: A critical evaluation on the effect of nanoclay on the mechanical, thermal, and morphological behavior

S. Sharma, S. K. Nayak, A. Nema, 2010 .

Mechanical properties and thermal conductivity of epoxy composites enhanced by h-BN/RGO and mh-BN/GO hybrid filler for microelectronics packaging application

S. Mohanty, S. Nayak, S. K. Nayak, 2019, SN Applied Sciences.

Synthesis and characterizations of sustainable polyester polyols from non-edible vegetable oils: Thermal and structural evaluation

S. Nayak, T. Varghese, S. Sunanda, 2017 .

Mechanical Behavior and Fracture Toughness Evaluation of Multiphase Polymer Nanocomposites Using Impact and -Integral via Locus Method

S. Mohanty, S. Nayak, B. P. Panda, 2013 .

Effect of Nano Sepiolite Fiber on the Properties of Poly(ethyl lactate acrylate): Hydrophilicity and Thermal Stability

M. Purushothaman, S. K. Nayak, P. S. G. Krishnan, 2018 .

Tunable Hydrophilicity of Poly(ethyl lactate acrylate-co-acrylic acid)

M. Purushothaman, S. K. Nayak, P. S. G. Krishnan, 2015 .

Preparation and characterization of porous polyethersulfone (PES) membranes with improved biocompatibility by blending sulfonated polyethersulfone (SPES) and cellulose acetate (CA) – A comparative study

S. Mohanty, S. K. Nayak, V. B. Athira, 2020 .

Fundamental and innovative approaches for filler design of thermal interface materials based on epoxy resin for high power density electronics application: a retrospective

S. K. Nayak, S. Mohanty, S. K. Nayak, 2019, Multiscale and Multidisciplinary Modeling, Experiments and Design.

Development of Hybrid Composites and Joining Technology for Lightweight Structures

K. Bhuvana, S. K. Nayak, S. Deepak, 2018 .

Evaluation of properties of industrial waste filled polymer composites for automobile applications

S. Kumar Nayak, S. K. Nayak, S. Bonda, 2015 .