Yuna Wu

发表

Divorced Eutectic Solidification in Hypereutectic Al–Si Alloys

H. Liao, Yuna Wu, Hao Chen, 2022, Metallurgical and Materials Transactions A.

Hot deformation behavior and processing map of Al–Si–Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation

H. Liao, J. Yang, Yuna Wu, 2015 .

Joint effect of micro-sized Si particles and nano-sized dispersoids on the flow behavior and dynamic recrystallization of near-eutectic Al–Si based alloys during hot compression

H. Liao, A. Ma, Jinghua Jiang, 2021 .

Divorced Eutectic Solidification in Hypereutectic Al–Si Alloys

H. Liao, Yuna Wu, Hao Chen, 2022, Metallurgical and Materials Transactions A.

Effect of Quenching Wait Time on Microstructure and Mechanical Properties of As‐extruded AA6063 Alloy

H. Liao, J. Yang, Yuna Wu, 2012 .

Recent progress of novel biodegradable Zinc alloys: from the perspective of strengthening and toughening

Hua-nan Liu, J. Bai, F. Xue, 2022, Journal of Materials Research and Technology.

Developing a high-strength Al–11Si alloy with improved ductility by combining ECAP and cryorolling

Edwin Eyram Klu, D. Song, Jiapeng Sun, 2020 .

Enhanced high-cycle fatigue strength of Al–12Si–4Cu-1.2Mn-T6 cast aluminum alloy at room temperature and 350 C

H. Liao, Yuna Wu, Yunyi Tang, 2021 .

Promoted Anodizing Reaction and Enhanced Coating Performance of Al–11Si Alloy: The Role of an Equal-Channel-Angular-Pressed Substrate

D. Song, Jiapeng Sun, Y. Qiao, 2019, Materials.

Developing an industrial-scale ECAP Mg-Al-Zn alloy with multi-heterostructure for synchronously high strength and good ductility

Hua-nan Liu, D. Song, Jing Han, 2020, Materials Characterization.

Microstructure and anisotropic mechanical behavior of the high-strength and ductility AZ91 Mg alloy processed by hot extrusion and multi-pass RD-ECAP

Lirong Xiao, Hua-nan Liu, Hao Zhou, 2020 .

Hardening response and precipitation behavior of Al–7%Si–0.3%Mg alloy in a pre-aging process

H. Liao, K. Ding, Yuna Wu, 2013 .

Corrosion Behavior of Extruded near Eutectic Al–Si–Mg and 6063 Alloys

H. Liao, Yuna Wu, 2013 .

Significant Enhancement in Tensile Strength of Room-Temperature Rolled Al-8zn-1mg Alloy Induced by Profuse Microbands

Hua-nan Liu, A. Ma, Jinghua Jiang, 2022, SSRN Electronic Journal.

Effect of equal-channel angular pressing and post-aging on impact toughness of Al-Li alloys

D. Song, A. Ma, Jinghua Jiang, 2018, Materials Science and Engineering: A.

Dynamic precipitation and recrystallization in Al-12.5 wt%Si-0.6 wt%Mg-0.1 wt%Ti alloy during hot-rolling and their impacts on mechanical properties

H. Liao, Yuna Wu, C. Lü, 2019, Journal of Alloys and Compounds.

Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al–Si–Mg alloy

H. Liao, Yuna Wu, K. Zhou, 2014 .

Developing high-strength ultrafine-grained pure Al via large-pass ECAP and post cryo-rolling

D. Song, A. Ma, Jinghua Jiang, 2021, Journal of Materials Research and Technology.

Microstructural control and mechanical properties of a high Li-containing Al-Mg-Li alloy

Jinghua Jiang, Yuna Wu, Y. Liang, 2021 .

Recent progress of Mg-Sn based alloys: the relationship between aging response and mechanical performance

Hua-nan Liu, Peng Zhang, A. Ma, 2022, Journal of Materials Research and Technology.

A bimodal grain structured Zn-0.4Mg-0.02Mn alloy with superior strength-ductility synergy

Hua-nan Liu, A. Ma, Jinghua Jiang, 2022, Materials Science and Engineering: A.

Effect of Si Content on Dynamic Recrystallization of Al-Si-Mg Alloys During Hot Extrusion

H. Liao, J. Yang, Yuna Wu, 2014 .

Achieving excellent ductility in high-strength Mg-10.6Gd-2 Ag alloy via equal channel angular pressing

Hua-nan Liu, Hao Zhou, D. Song, 2020 .

Preparation of a high strength and high ductility Mg-6Zn alloy wire by combination of ECAP and hot drawing

Hua-nan Liu, Zhao-yang Jin, Jiapeng Sun, 2019, Materials Science and Engineering: A.

Tailoring Strength and Ductility of Mg97y2zn1 Alloy Through the Architecture of Heterogeneous Lamellar Structure by Large-Ratio Hot Extrusion

Hua-nan Liu, Chao Sun, J. Bai, 2023, SSRN Electronic Journal.

Comparative Study of Two Aging Treatments on Microstructure and Mechanical Properties of an Ultra-Fine Grained Mg-10Y-6Gd-1.5Zn-0.5Zr Alloy

Hua-nan Liu, Jiapeng Sun, A. Ma, 2018, Metals.

Effect of texture evolution on mechanical properties of near eutectic Al–Si–Mg alloy with minor addition of Zr/V during hot extrusion

H. Liao, J. Yang, Yuna Wu, 2014 .

Managing strength and ductility in AZ91 magnesium alloy through ECAP combined with prior and post aging treatment

Hua-nan Liu, D. Song, Jiapeng Sun, 2019, Materials Characterization.

Enhanced quasi-isotropic ductility in bi-textured AZ91 Mg alloy processed by up-scaled RD-ECAP processing

Hua-nan Liu, D. Song, Jing Han, 2019, Journal of Alloys and Compounds.

Simultaneously improving the strength and ductility of an Al-5.5Mg-1.6Li-0.1Zr alloy via warm multi-pass ECAP

A. Ma, Jinghua Jiang, Yuchun Yuan, 2019, Materials Characterization.

Effect of Si content on microstructure and mechanical properties of Al–Si–Mg alloys

H. Liao, Yongjin Wang, J. Yang, 2014 .

Microstructure Evolution of Al-0.35%Si-0.2%Mg-0.3%Ce Alloy During Hot Extrusion and Its Contributions to Performances

H. Liao, Yongjin Wang, Yuna Wu, 2015, Journal of Materials Engineering and Performance.

Investigation on Formation Mechanism of Irregular Shape Porosity in Hypoeutectic Aluminum Alloy by X-Ray Real Time Observation

H. Liao, Ye Pan, Yuna Wu, 2012, Metallurgical and Materials Transactions A.

Development of high performance near eutectic Al–Si–Mg alloy profile by micro alloying with Ti

Jianfeng Zhang, H. Liao, Yuping Wu, 2016 .

Dynamic precipitation of Mg2Si induced by temperature and strain during hot extrusion and its impact on microstructure and mechanical properties of near eutectic Al–Si–Mg–V alloy

H. Liao, Yabing Liu, Yuna Wu, 2014 .

Tension-compression asymmetry of the AZ91 magnesium alloy with multi-heterogenous microstructure

Hua-nan Liu, D. Song, Jing Han, 2019, Materials Science and Engineering: A.

Enhanced tensile strength and ductility of an Al-6Si-3Cu alloy processed by room temperature rolling

Quan Zhang, Hua-nan Liu, A. Ma, 2021, Journal of Alloys and Compounds.

Contributions to high temperature strengthening from three types of heat-resistant phases formed during solidification, solution treatment and ageing treatment of Al-Cu-Mn-Ni alloys respectively

H. Liao, Yuna Wu, Hua-long Li, 2020 .

Effect of eutectic Si size on the flow behavior and hot processing map of near eutectic Al-Si alloys

Haichao Xu, A. Ma, Jinghua Jiang, 2021, Journal of Materials Research and Technology.

Shrinking tension-compression asymmetry of Au nanowires by designed nanotwin boundaries

Hua-nan Liu, Jing Han, Jiapeng Sun, 2020 .

Cooperative Effect of Li Content and Equal-Channel Angular Pressing on Microstructure and Mechanical Properties of Al-Mg-Li Alloy

Zhipeng Yuan, A. Ma, Yuchun Yuan, 2019, Metals.

Grain refinement mechanism and mechanical properties of wrought Zn-0.1Mg-0.02Mn alloys by rolling at different reductions

Hua-nan Liu, J. Yin, J. Bai, 2023, Journal of Materials Research and Technology.

A bimodal grain structured Zn-0.5Ag-0.2Mg alloy with high strength and ductility achieved through combined ECAP and cold rolling

P. Zhang, Hua-nan Liu, A. Ma, 2023, Journal of Materials Research and Technology.

Refining 18R-LPSO phase into sub-micron range by pre-kinking design and its prominent strengthening effect on Mg97Y2Zn1 alloy

Ziyue Xu, Hua-nan Liu, J. Bai, 2023, Journal of Materials Science & Technology.

RT ECAP and rolling bestow high strength and good ductility on a low lithium aluminum alloy

Y. Li, Hua-nan Liu, A. Ma, 2023, Journal of Materials Research and Technology.

Comparative study of the microstructure evolution and mechanical properties of Zn-0.1Mg-0.02Ca alloy under cold rolling and ECAP

Yuna Wu, J. Ju, Jinghua Jiang, 2024, Materials Science and Engineering: A.

Pre-precipitating promoted by microshear bands effectively circumvents strength-ductility trade-off of RT-rolled Al–6Zn–1Mg alloy

D. Song, A. Ma, Jinghua Jiang, 2024, Journal of Materials Research and Technology.

An overview of microstructure regulation treatment of Cu-Fe alloys to improve strength, conductivity, and electromagnetic shielding

A. Ma, Yuna Wu, Jinghua Jiang, 2024, Journal of Alloys and Compounds.