K. Lederer

发表

Small angle X-ray scattering measurements with dilute solutions of bovine fibrinogen☆

K. Lederer, 1972 .

Hydrodynamic study of fibrinogen molecular models to test their compatibility with data from the ultracentrifuge and viscosity measurements.

K. Lederer, A. Finkelstein, 1970, Biopolymers.

Thermal degradation of copolymers of 2-hydroxyethyl methacrylate and alkyl methacrylates

M. S. Choudhary, K. Lederer, 1982 .

Accelerated ageing experiments with crosslinked and conventional ultra-high molecular weight polyethylene (UHMW-PE) stabilised with α-tocopherol for total joint arthroplasty

K. Lederer, C. Wolf, C. Macho, 2006, Journal of materials science. Materials in medicine.

Size and shape of fibrinogen, 1. Electron microscopy of the hydrated molecule

L. Bachmann, K. Lederer, R. Hammel, 1975 .

SEC of Ultra-high Molar Mass Polymers: Optimization of Experimental Conditions to Avoid Molecular Degradation in the Case of Narrow Polystyrene Standards

N. Aust, K. Lederer, M. Parth, 2001 .

Molecular Characterization of Polyolefins

N. Aust, K. Lederer, 1996 .

High shear rate viscosity measurements with dilute solutions of bovine fibrinogen.

J. Schurz, K. Lederer, 1972, Biopolymers.

Determination of the Distribution of Molar Mass and Comonomer Content of Medium Density Polyethylene: Comparison of Procedures with Alternative Sequence of Fractionation

N. Aust, K. Lederer, I. Beytollahi-Amtmann, 1995 .

Molecular Characterization of Ultrahigh Molar Mass and Soluble Fractions of Partially Cross-Linked Polyethylenes

N. Aust, K. Lederer, M. Parth, 2003 .

Gel point determination for the copolymerization system of cardanyl acrylate and styrene and its critical conversion

H. Koerner, L. H. Nguyen, K. Lederer, 2003 .

The role of β-hydrogen in the degradation of polyesters

P. Sivasamy, C. Vijayakumar, M. Palaniandavar, 1992 .

Synthesis and characterization of polypropylene reinforced with cellulose I and II fibers

K. Lederer, G. Riess, Yara Borja, 2006 .

Molecular characterization of commercial polypropylene with narrow and broad distribution of molar mass (Technical Report)

K. Lederer, I. Mingozzi, 1997 .

Primary processes of the thermal degradation of HET acid containing unsaturated polyester cured with styrene

J. Fink, K. Lederer, C. Vijayakumar, 1983 .

Rheometry and Structure-Rheology of Biopolymers

J. Schurz, E. Gruber, K. Lederer, 1974 .

Preparation and Characterization of Partially Degraded High-Density Polyethylene in an Internal Mixer

A. Mahendran, C. Vijayakumar, N. Aust, 2008 .

Studies on the effect of electron beam radiation on the molecular structure of ultra-high molecular weight polyethylene under the influence of α-tocopherol with respect to its application in medical implants

N. Aust, K. Lederer, M. Parth, 2002, Journal of materials science. Materials in medicine.

Biocompatibility of ultra-high molecular weight polyethylene (UHMW-PE) stabilized with α-tocopherol used for joint endoprostheses assessed in vitro

E. Ingolič, K. Schauenstein, R. Pfragner, 2007, Journal of materials science. Materials in medicine.

Animal experiments with ultra-high molecular weight polyethylene (UHMW-PE) stabilised with α-tocopherol used for articulating surfaces in joint endoprostheses

H. Bergmeister, U. Losert, P. Böck, 2006, Journal of materials science. Materials in medicine.

Stabilisation of crosslinked ultra-high molecular weight polyethylene (UHMW-PE)-acetabular components with α-tocopherol

R. Marr, T. Gamse, K. Lederer, 2006, Journal of materials science. Materials in medicine.

Tests of biocompatibility of α-tocopherol with respect to the use as a stabilizer in ultrahigh molecular weight polyethylene for articulating surfaces in joint endoprostheses

K. Lederer, U. Müller, C. Wolf, 2002, Journal of materials science. Materials in medicine.

Examination of the suitability of α-tocopherol as a stabilizer for ultra-high molecular weight polyethylene used for articulating surfaces in joint endoprostheses

K. Lederer, W. Schneider, C. Wolf, 2002, Journal of materials science. Materials in medicine.

Experimental Analysis of Nano and Engineering Materials and Structures

Reinhold W. Lang, Klaus Lederer, Zoltan Major, 2007 .

Flow-rate dependent degradation of high-molecular-weight polyisobutylene in GPC

C. Huber, K. Lederer, 1980 .

Analysis of aromatic antioxidants and ultraviolet stabilizers in polyethylene using high‐temperature extraction with low boiling solvent

T. Macko, K. Lederer, B. Furtner, 1996 .

Pyrolysis studies on an unsaturated polyester based on HET-acid, maleic anhydride and 1,2-propanediol: Qualitative analysis of the products of degradation and mechanistic aspects

J. Fink, C. Vijayakumar, K. Lederer, 1986 .

The ene reaction between N‐isobutylallylnadimide and N‐isobutylmaleimide as a model for the cross‐linking reaction in bis(allyl)nadimide polymerization

C. Vijayakumar, K. Lederer, A. Kramer, 1990 .

Free radical Co‐ and terpolymerization of styrene, hydrogenated cardanyl acrylate, and cardanyl acetate

H. Koerner, L. H. Nguyen, K. Lederer, 2003 .

Calibration of Separation and Instrumental Peak Broadening in Sec Coupled with Light Scattering of Simple Polymers

K. Lederer, T. Mayr, J. Billiani, 1990 .

Polypropylene Characterization by High Temperature Sec Coupled with Lalls

K. Lederer, J. Billiam, 1990 .

Simultaneous calibration of separation and axial dispersion in size exclusion chromatography coupled with light scattering

K. Lederer, M. Dunky, G. Imrich‐Schwarz, 1986 .

Distribution of molar mass and branching index of natural rubber from hevea brasiliensis trees of different age by size exclusion chromatography coupled with online viscometry

N. Aust, K. Lederer, M. Parth, 2002 .

Supercritical CO2 impregnation of polyethylene components for medical purposes

R. Marr, T. Gamse, K. Lederer, 2007 .

A comparative study of the thermal degradation of unsaturated polyester resins containing various chlorinated norbornene dicarboxylic acid units in the backbone: Part II. The fate of the styrene moiety

C. Vijayakumar, K. Lederer, G. H. Irzl, 1988 .

A comparaive study of the thermal degradation of unsaturated polyester resins containing various chlorinated norbornene dicarboxylic acid units in the backbone

J. Fink, C. Vijayakumar, K. Lederer, 1987 .

Thermal degradation aspects of model copolymers based on styrene, maleic anhydride, diethyl maleate and diethyl fumarate

J. Fink, C. Vijayakumar, K. Lederer, 1989 .

An insight into the degradation aspects of 1,4,5,6,7,7-hexachlorobicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid based two component polyesters

C. Vijayakumar, K. Lederer, 1990 .

Mechanisms of the thermal degradation of polyesters based on 1,2‐propanediol, phthalic anhydride, maleic anhydride and 1,4,5,6,7,7‐hexachlorobicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxylic acid

C. Vijayakumar, K. Lederer, 1988 .

Pyrolysis studies on polyalkylene phthalates

J. Fink, C. Vijayakumar, K. Lederer, 1987 .

The Shape of the Fibrinogen Molecule: Sausage or Banana?

K. Lederer, 1979, Thrombosis and Haemostasis.

Characterization of Polyvinylchloride by Size Exclusion Chromatography. I. Concentration Dependence of Axial Dispersion Observed in Size Exclusion Chromatography Coupled With Light Scattering

K. Lederer, S. Vijayakumar, J. Billiani, 1990 .

A new procedure for simultaneous calibration of separation and axial dispersion in SEC

K. Lederer, J. Billiani, G. Rois, 1988 .

HPLC Quantification of Thioether Antioxidants in Polyethylene after Dissolution of the Polymer under Pressure in an Aliphatic Solvent

T. Macko, K. Lederer, B. Furtner, 1997 .

Molecular characterization of commercial polypropylene with narrow and broad distribution of molar mass (Technical Report)

K. Lederer, I. Mingozzi, 1997 .