Sanjib Kumar Acharyya

发表

Effect of Microstructure Degradation on Fracture Toughness of 20MnMoNi55 Steel in DBT Region

Prasanta Sahoo, Sumit Bhowmik, Sankar Dhar, 2016, Int. J. Manuf. Mater. Mech. Eng..

GA-Optimized Fuzzy-Feedforward-Bias Control of Motion by a Rugged Electrohydraulic System

Rana Saha, Dipankar Sanyal, Bikash Kumar Sarkar, 2015, IEEE/ASME Transactions on Mechatronics.

Fractional polynomial mod traps for optimization of jerk and hertzian contact stress in cam surface

Sanjib Kumar Acharyya, Tarun Kanti Naskar, 2008 .

Optimum design of mounting components of a mass property measurement system

Nripen Mondal, Rana Saha, Dipankar Sanyal, 2016 .

Evaluation of critical fracture energy parameter Gfr and assessment of its transferrability

Sanjib Kumar Acharyya, Jayanta Chattopadhyay, S. Dhar, 2008 .

Measuring cam-follower performance

Sanjib Kumar Acharyya, Tarun Kanti Naskar, 2010 .

Static-Performance Based Computer-Aided Design of a DDV and its Sensitivity Analysis

S. Mookherjee, Dipankar Sanyal, Sanjib Kumar Acharyya, 2001 .

Elastic–plastic J and COD estimation schemes for 90° elbow with throughwall circumferential crack at intrados under in-plane opening moment

H. S. Kushwaha, Sanjib Kumar Acharyya, Jayanta Chattopadhyay, 2007 .

Optimization of Primary Loop Pump Power of a Loop-type Liquid Metal Fast Breeder Reactor with Annular Fuel Using Genetic Algorithm

Sanjib Kumar Acharyya, Swarnendu Sen, Shubhajit Karmakar, 2014, SocProS.

Estimation of fracture toughness of 20MnMoNi55 steel in the ductile to brittle transition region using master curve method

Prasanta Sahoo, Jayanta Chattopadhyay, Sumit Bhowmik, 2011 .

A complete GTN model for prediction of ductile failure of pipe

Sanjib Kumar Acharyya, S. Dhar, S. Dhar, 2008 .

Material characterization of SS 316 in low-cycle fatigue loading

Sanjib Kumar Acharyya, S. Dhar, S. Dhar, 2010 .

The effect of non-crack component on critical fracture energy of ductile material

Jayanta Chattopadhyay, Sanjib Kumar Acharyya, S. Dhar, 2004 .

Application and comparative study of the master curve methodology for fracture toughness characterization of 20MnMoNi55 steel

Prasanta Sahoo, Jayanta Chattopadhyay, Sumit Bhowmik, 2012 .

Performance of EAs for four-bar linkage synthesis

Sanjib Kumar Acharyya, S. Acharyya, M. Mandal, 2009 .

Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel

Sanjib Kumar Acharyya, Debasis Datta, Sankar Dhar, 2015 .

Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling

Arunanshu S. Kuar, Bappa Acherjee, Souren Mitra, 2012 .