T. Couvant

发表

Corrosion and Hydrogen Fatigue at Different Scales

N. Saintier, G. Odemer, Mohamed El May, 2019, Mechanics - Microstructure - Corrosion Coupling.

Intergranular oxidation of 316L stainless steel in the PWR primary water environment

J. Westraadt, T. Couvant, R. Matthews, 2017 .

Adaptation of the point defect model to simulate oxidation kinetics of 316L stainless steel in the pressurised water reactor environment

R. Knutsen, J. Westraadt, T. Couvant, 2021 .

Mechanical Tests in Corrosive Environments and Under Gaseous Hydrogen

L. Briottet, M. Frégonèse, A. Oudriss, 2019, Mechanics - Microstructure - Corrosion Coupling.

Energy ordering of grain boundaries in Cr2O3: insights from theory

B. Diawara, M. Islam, T. Couvant, 2013, Journal of physics. Condensed matter : an Institute of Physics journal.

The influence of surface oxides on the mechanical response of oxidized grain boundaries

D. Armstrong, E. Tarleton, S. Lozano-Perez, 2017 .

7 – Effect of strain-path on stress corrosion cracking of AISI 304L stainless steel in PWR primary environment at 360 °C

T. Couvant, F. Vaillant, J. Boursier, 2007 .

Effect of chlorides and sulfates on the EAC of austenitic stainless steel in PWR environment

P. Combrade, O. Raquet, E. Herms, 2007 .

Local-scale Modeling of Plasticity–Environment Interactions

Isabelle Aubert, J. Bouhattate, Yann Charles, 2019, Mechanics - Microstructure - Corrosion Coupling.

Oxide layer growth on nickel-base alloy surfaces in high temperature water and in O2 studied by ToF-SIMS with isotopic tracers

P. Marcus, A. Seyeux, S. Zanna, 2018, Corrosion Science.

Evaluation of the susceptibility to SCC initiation of alloy 690 in simulated PWR primary water

T. Couvant, K. Tsutsumi, 2011 .

Using Microscopy to Help with the Understanding of Degradation Mechanisms Observed in Materials of Pressurized Water Reactors

B. Radiguet, P. Pareige, L. Legras, 2017 .

Stress Concentration in the Bulk Cr2O3: Effects of Temperature and Point Defects

P. Marcus, B. Diawara, Mazharul M. Islam, 2017 .

Learnings from EDF investigations on SG divider plates and vessel head nozzles: evidence of prior deformation effect on stress corrosion cracking

Y. Thébault, T. Couvant, S. Miloudi, 2011 .

SCC of cold-worked austenitic stainless steels in PWR conditions

O. Raquet, E. Herms, T. Couvant, 2007 .

Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steels in Laboratory Primary PWR Environment

C. Amzallag, O. Raquet, T. Couvant, 2004 .

Fatigue Crack Initiation of 304L Stainless Steel in Simulated PWR Primary Environment: Relative Effect of Strain Rate

J. Mendez, L. Legras, N. Huin, 2012 .

Development of Understanding of The Interaction between Localized deformation and SCC of Austenitic Stainless Steels Exposed to Primary Environment

D. Delafosse, G. Cailletaud, L. Legras, 2010 .

Prediction of IGSCC as a Finite Element Modeling Post-analysis

T. Couvant, 2017 .

Calibration of the Local IGSCC Engineering Model for Alloy 600

J. Crépin, T. Couvant, C. Duhamel, 2017 .

The Effect of Elastic and Plastic Strain on Surface and Intergranular Oxidation of Alloy 600 in Simulated Pwr Primary Water

P. Marcus, A. Seyeux, T. Couvant, 2023, SSRN Electronic Journal.

Effect of Localized Strain Deformation on SCC Initiation of Stainless Steels in Simulated PWR Primary Water

G. Ilevbare, T. Couvant, 2014 .

Intergranular Oxidation of Nickel-Base Alloys: Potentialities of Focused Ion Beam Tomography

J. Crépin, F. Gaslain, T. Couvant, 2017, Oxidation of Metals.