B. N. Jaya

发表

Understanding the role of matrix precipitates on the environmentally assisted cracking behavior of AA 7050 alloy

V. S. Raja, Shweta G. Shukla, B. N. Jaya, 2022, Corrosion Science.

Crack stability in edge-notched clamped beam specimens: modeling and experiments

V. Jayaram, B. N. Jaya, B. Nagamani Jaya, 2014, International Journal of Fracture.

Deformation and Fracture Behavior of Cold-Drawn Pearlitic Steel Wires After Heat Treatment

B. N. Jaya, Suprit P. Bhusare, Suprit Bhusare, 2019, Lecture Notes in Mechanical Engineering.

Fracture behavior of nanostructured heavily cold drawn pearlitic steel wires before and after annealing

G. Dehm, C. Kirchlechner, G. Richter, 2017 .

The Defining Role of Micro-fissures on the Mechanical Behavior of Laser-Welded Fully Austenitic Stainless Steel

I. Samajdar, R. Mythili, Arup Dasgupta, 2022, Metallurgical and Materials Transactions A.

Energy Release Rate Formulations for Non-conventional Fracture Test Geometries

A. Mishra, B. N. Jaya, Tejas S. Chaudhari, 2021, JOM.

Non-conventional Small-Scale Mechanical Testing of Materials

K. Jacob, A. Mishra, B. N. Jaya, 2022, Journal of the Indian Institute of Science.

Finite Element Modeling of Indentation Behavior of Dual Phase Steels: Role of Plastic Zone Size in Property Mapping

B. N. Jaya, Soudip Basu, N. G. Mathews, 2022, JOM.

Fracture in small-scale structures and confined volumes

B. N. Jaya, 2022, MRS Bulletin.

Modified Clamped Beam Bend Method for Determination of Interfacial Fracture Energy of Thermally Sprayed Yttria Stabilised Zirconia Over Steel

S. Sampath, A. Mishra, B. N. Jaya, 2022, Journal of the European Ceramic Society.

Coccospheres confer mechanical protection: New evidence for an old hypothesis.

C. Scheu, G. Dehm, C. Kirchlechner, 2016, Acta biomaterialia.

Mechanical size effects in a single crystalline equiatomic FeCrCoMnNi high entropy alloy

R. Raghavan, G. Dehm, C. Kirchlechner, 2017 .

Effect of size and domain orientation on strength of Barium Titanate

A. K. Saxena, C. Kirchlechner, G. Dehm, 2020 .

In-situ study of microscale fracture of diffusion aluminide bond coats: Effect of platinum

V. Jayaram, S. Asif, S. Bhowmick, 2015 .

The oxidation behavior of iron-chromium alloys: The defining role of substrate chemistry on kinetics, microstructure and mechanical properties of the oxide scale

M.I. Khan, M. Prasad, I. Samajdar, 2021 .

Study of microstructure-property correlations in dual phase steels for achieving enhanced strength and reduced strain partitioning

I. Samajdar, A. Patra, M. Dutta, 2022, Materialia.

Correlative characterization and plasticity modeling of microscopic strain localizations in a dual phase steel

I. Samajdar, A. Patra, M. Dutta, 2023, Materials Characterization.

High pressure torsion processing of maraging steel 250: Microstructure and mechanical behaviour evolution

A. Hohenwarter, S. Dixit, K. Jacob, 2020 .

Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales

R. Raghavan, G. Dehm, C. Kirchlechner, 2018 .

Review on Quantum Mechanically Guided Design of Ultra-Strong Metallic Glasses

J. Schneider, D. Raabe, B. Gault, 2020, Frontiers in Materials.

Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical tests

A. Hohenwarter, K. Jacob, B. N. Jaya, 2022, Nanotechnology.

Multiscale characterization of damage tolerance in barium titanate thin films

A. K. Saxena, N. Venkataramani, G. Dehm, 2022, Journal of Applied Physics.

The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel

A. Hohenwarter, I. Samajdar, A. Patra, 2021, Metallurgical and Materials Transactions A.

Transition from shear to stress-assisted diffusion of copper–chromium nanolayered thin films at elevated temperatures

R. Raghavan, J. Wehrs, J. Michler, 2015 .

Effect of Dislocation Network on Precipitate Morphology and Deformation Behaviour in Maraging steels: Modelling and Experimental Validation

K. Jacob, M. Gururajan, B. N. Jaya, 2022, Materialia.

Electronic hybridisation implications for the damage-tolerance of thin film metallic glasses

J. Schneider, D. Raabe, D. Music, 2016, Scientific Reports.

A novel macroscopic computational methodology to predict the locations and orientation of solidification-cracks: Application to pulsed laser welding

I. Samajdar, S. Karagadde, C. Ghosh, 2023, International Journal of Heat and Mass Transfer.

Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon

G. Dehm, C. Kirchlechner, B. N. Jaya, 2015 .

Morse-Code inspired architectures for tunable damage tolerance in brittle material systems

B. N. Jaya, D. Yadav, T. More, 2022, Journal of Materials Research.

Fracture Testing at Small-Length Scales: From Plasticity in Si to Brittleness in Pt

V. Jayaram, B. N. Jaya, 2016 .

Strategies for damage tolerance enhancement in metal/ceramic thin films: Lessons learned from Ti/TiN

J. Schneider, C. Kirchlechner, M. Hans, 2022, Acta Materialia.

Optimization of clamped beam geometry for fracture toughness testing of micron-scale samples

V. Jayaram, O. Warren, S. Bhowmick, 2015 .

Microscale Fracture Behavior of Single Crystal Silicon Beams at Elevated Temperatures.

J. Wehrs, J. Michler, G. Dehm, 2016, Nano letters.

Mode dependent evaluation of fracture behaviour using cantilever bending

A. Mishra, B. N. Jaya, N. G. Mathews, 2021 .

Influence of Heat Input on Solidification Cracking in Additively Manufactured CM247LC Ni-based Superalloy

D. Srinivasan, B. N. Jaya, B. Kumar, 2023, Metallurgical and Materials Transactions A.

Micro-mechanisms of deformation accommodation in AA7050 alloy in the presence of hydrogen

V. S. Raja, B. N. Jaya, Shweta Shukla, 2023, Journal of Alloys and Compounds.

Analysis of the full stress tensor in a micropillar: Ability of and difficulties arising during synchrotron based μLaue diffraction

C. Kirchlechner, A. Davydok, J. Micha, 2016 .

Size and microstructural factors affecting the micro-hole expansion ratio and fracture toughness of dual phase steel sheets

B. N. Jaya, Soudip Basu, S. Ganguly, 2025, Materials Science and Engineering: A.