Han-Jin Kim

发表

Tensile and Fracture Behaviors of Austenitic High-Manganese Steels Subject to Different Hydrogen Embrittlement Test Methods

Seung-Yong Lee, J. Suh, J. Shim, 2019, Materials Science and Engineering: A.

Hydrogen embrittlement in high interstitial alloyed 18Cr10Mn austenitic stainless steels

M. P. Phaniraj, J. Suh, Tae-Ho Lee, 2015 .

Self-healing behavior of Inconel 617B superalloy

Young‐kook Lee, J. Suh, Han-Jin Kim, 2019, Journal of Alloys and Compounds.

Hydrogen-induced change in microstructure and properties of steels: 18Cr10Mn–0.4N vis-à-vis 18Cr10Ni

M. P. Phaniraj, Heung Nam Han, S. Baek, 2018 .

Ultra-strong and strain-hardenable ultrafine-grained medium-entropy alloy via enhanced grain-boundary strengthening

Sunghak Lee, Hyoung-Seop Kim, S. Sohn, 2021 .

In Situ Scanning Electron Microscopy Analysis of the Interfacial Failure of Oxide Scales on Stainless Steels and Its Effect on Sticking during Hot Rolling

J. Suh, Seung-Rok Kim, Jin-Woo Park, 2022, ACS Omega.

Activation of Ti–Fe–Cr alloys containing identical AB2 fractions

Young-Su Lee, Jihyun Hong, J. Suh, 2021 .

Influence of Hydrogen Absorption on Stacking Fault of Energy of a Face-Centered Cubic High Entropy Alloy

M. Cho, J. Suh, Han-Jin Kim, 2022, Metals and Materials International.

High temperature tensile and creep properties of CrMnFeCoNi and CrFeCoNi high-entropy alloys

Dong-Ik Kim, J. Suh, W. Jung, 2022, Materials Science and Engineering: A.

Effect of Thermal Charging of Hydrogen on the Microstructure of Metastable Austenitic Stainless Steel

M. P. Phaniraj, Young-Su Lee, Dong-Ik Kim, 2017 .

On the long-term cyclic stability of near-eutectic Mg–Mg2Ni alloys

Hyung-ki Park, J. Suh, Byeong-Chan Suh, 2021, International Journal of Hydrogen Energy.

Kinetics and thermodynamics of near eutectic Mg-Mg2Ni composites produced by casting process

Young-Su Lee, J. Suh, J. Shim, 2020 .

Role of Hydrogen and Temperature in Hydrogen Embrittlement of Equimolar CoCrFeMnNi High-entropy Alloy

Junghoon Lee, J. Suh, N. Kang, 2020, Metals and Materials International.

Microstructural investigation on the failure in APMT/KHR45A dissimilar weld interface after long-term service at high temperature

Jihye Park, Dong-Ik Kim, J. Suh, 2021 .

Microstructure and mechanical properties of friction stir welded and laser welded high entropy alloy CrMnFeCoNi

Han-Jin Kim, Sung-Tae Hong, Heung Nam Han, 2018, Metals and Materials International.

Hydrogen-Induced Intergranular Fracture Behavior Accelerated by Needle-like MC Carbide in IN740H Superalloy

S. Baek, J. Suh, J. Shim, 2022, Hydrogen.

Determining the effect of added zirconium on the bond character in TiFe alloys using scanning Kelvin probe force microscopy

J. Suh, J. Shim, Han-Jin Kim, 2020 .

Roles of the grain-boundary characteristics and distributions on hydrogen embrittlement in face-centered cubic medium-entropy VxCr1-xCoNi alloys

B. Dutta, Y. Na, J. Suh, 2023, Materials Science and Engineering: A.