Xiang Ling

发表

Numerical simulation and experimental verification on thermal performance of a novel fin-plate thermosyphon

Hao Peng, Juan Li, Xiang Ling, 2012 .

SIMULATION OF 3D RESIDUAL STRESS FIELD OF SHOT PEENING BY DYNAMIC FINITE ELEMENT ANALYSIS

Xiang Ling, 2006 .

Numerical simulation of condensation in microchannels between spherical particles

Hao Peng, Yan Wang, Lingjun Zhou, 2016 .

Xiang Ling, Yi Wang, Leiming Zhao, 2013, 2013 International Conference on Anti-Counterfeiting, Security and Identification (ASID).

The Application of Holzer Transfer Matrix for Nature Torsional Vibration Frequency Calculation

Xiang Ling, 2010 .

Theoretical analysis of free-surface film flow on the rotary granulating disk in waste heat recovery process of molten slag

Dongxiang Wang, Hao Peng, Xiang Ling, 2014 .

Purification of Rotor Center's Orbit with Mathematical Morphology Filters

Xiang Ling, 2005 .

Dynamic Analysis of a Rotor with Coupling Faults of Crack and Rub-Impact Under Nonlinear Oil-film Force

Xiang Ling, Zhang Lijia, Gao Xueyuan, 2016 .

Notice of Retraction Oil Film Instability Fault Diagnosis Using Hilbert Huang Transform

Hu Aijun, Tang Guiji, Zhang Ruiqing, 2010 .

Analysis of heat transfer and flow characteristics over serrated fins with different flow directions

Hao Peng, Xiang Ling, Hao Peng, 2011 .

Output-only modal analysis of wind turbine tower based on vibration response under emergency stop.

Zhao Jun, Hu Aijun, Xiang Ling, 2018 .

Comparative analysis of gas–liquid flow in T-junction microchannels with different inlet orientations

Hao Peng, Xiang Ling, Dongren Liu, 2016 .

Load Shedding Scheme with Deep Reinforcement Learning to Improve Short-term Voltage Stability

Chao Lu, Chen Fang, Yong Zhang, 2018, 2018 IEEE Innovative Smart Grid Technologies - Asia (ISGT Asia).

Flow and heat transfer characteristics of a double-tube structure internal finned tube with blossom shape internal fins

Hao Peng, Xiang Ling, Luanfang Duan, 2018 .

Calculation of Inherent Characerisics of Steam Turboset Shafting

Xiang Ling, 2009 .

Beam scanning of uniform circular array based on coupled oscillators

Yonghua Jiang, Jun Li, Xiang Ling, 2010, 2010 International Conference on Anti-Counterfeiting, Security and Identification.

Three-dimensional numerical simulation on plastic damage in small punch specimen of Zirconium

Xiang Ling, Ruomei Hu, 2009 .

Simulation of ligament mode breakup of molten slag by spinning disk in the dry granulation process

Dongxiang Wang, Hao Peng, Xiang Ling, 2015 .

Numerical Simulation on Pressure Drops for Air-Water Two-Phase Flow in Micro-Channels

Hao Peng, Xiang Ling, 2008 .

Influence of Different Tower Models on the Lightning Back-Strike Intruding Wave Overvoltage for UHV Substation

Xiang Ling, 2008 .

Study on the solidification characteristics of molten slag droplets cooled by mixed cooling medium

Hao Peng, Lin Liu, Xiang Ling, 2019, Applied Thermal Engineering.

Neural networks analysis of thermal characteristics on plate-fin heat exchangers with limited experimental data

Hao Peng, Xiang Ling, Hao Peng, 2009 .

Thermo-hydraulic performances of internally finned tube with a new type wave fin arrays

Yang Li, Lin Liu, Hao Peng, 2016 .

Cost-effectiveness performance analysis of organic Rankine cycle for low grade heat utilization coupling with operation condition

Dongxiang Wang, Hao Peng, Xiang Ling, 2013 .

Efficiency and optimal performance evaluation of organic Rankine cycle for low grade waste heat power generation

Dongxiang Wang, Lin Liu, Hao Peng, 2013 .

Case Studies on Performance Prediction of Radial Inflow Turbine under Multiple Rotor Structures and Organic Fluids

Xiang Ling, Wenyu Li, Yunyuan Li, 2021 .

Simulation and optimization of humidification-dehumidification evaporation system

Xin Huang, Yang Li, Hao Peng, 2018 .

Complex turbulent flow and heat transfer characteristics of tubes with internal longitudinal plate-rectangle fins in EGR cooler

Hao Peng, Xiang Ling, Hao Peng, 2013 .

The role of sensible heat in a concentrated solar power plant with thermochemical energy storage

Yan Wang, Xiang Ling, X. Ling, 2019, Energy Conversion and Management.

Mechanical behaviour and strain rate sensitivity analysis of TA2 by the small punch test

Lin Xue, Xiang Ling, X. Ling, 2019, Theoretical and Applied Fracture Mechanics.

Local Fractional Laplace Variational Iteration Method for Nonhomogeneous Heat Equations Arising in Fractal Heat Flow

Carlo Cattani, Gongnan Xie, Shu Xu, 2014 .

Computational fluid dynamics modelling on flow characteristics of two-phase flow in micro-channels

Hao Peng, Xiang Ling, Hao Peng, 2011 .

Thermal characteristics of the combined flat plate heat receiver in solar power tower plant

Lin Yang, Ruiwen Zhou, Hao Peng, 2018, Energy.

Thermal investigation and performance analysis of a novel evaporation system based on a humidification-dehumidification process

Xin Huang, Yang Li, Xiang Ling, 2017 .

Analysis on flow and heat transfer characteristics of EGR helical baffled cooler with spiral corrugated tubes

Hao Peng, Xiang Ling, Lin Liu, 2013 .

A optimization technique for the composite strut using genetic algorithms

Xiaofeng Lu, Xiang Ling, Bin Liu, 2015 .

Numerical simulation of thermal stress in tube-sheet of heat transfer equipment

Minshan Liu, Dan Wang, Xiang Ling, 1999 .

A NOVEL SCHEDULE FOR SOLVING THE TWO-DIMENSIONAL DIFFUSION PROBLEM IN FRACTAL HEAT TRANSFER

Hassan Kamil Jassim, Shu Xu, Xiang Ling, 2015 .

Application of Runge–Kutta–Merson algorithm for creep damage analysis

Shan-Tung Tu, Xiang Ling, X. Ling, 2000 .

Numerical Simulation of Saturation Behavior of Physical Properties in Composites with Randomly Distributed Second-phase

Xiang Ling, Wen-Zhong Cai, X. Ling, 2005 .

Collapse models of aluminum foam sandwiches under static three-point bending based on 3D geometrical reconstruction

Bin Liu, Xiaofeng Lu, Xiang Ling, 2014 .

State of the art on the high-temperature thermochemical energy storage systems

Hao Peng, Xiang Ling, Hao Peng, 2018, Energy Conversion and Management.

An Improved Particle Swarm Algorithm for Optimal Design of Plate-Fin Heat Exchangers

Hao Peng, Xiang Ling, Hao Peng, 2010 .

Modeling on heat storage performance of compressed air in a packed bed system

Hao Peng, Xiang Ling, Li Rui, 2015 .

Numerical study and experimental verification of transverse direction type serrated fins and field synergy principle analysis

Hao Peng, Xiang Ling, Juan Li, 2013 .

Performance analysis of double organic Rankine cycle for discontinuous low temperature waste heat recovery

Hao Peng, Xiang Ling, Hao Peng, 2012 .

Damage Mechanics Considerations for Life Extension of High-Temperature Components

Shan-Tung Tu, Xiang Ling, Jian-Ming Gong, 2000 .

Creep behaviors evaluation of Incoloy800H by small punch creep test

Xiang Ling, X. Ling, Sisheng Yang, 2017 .

Measurement of Local Creep Deformation in Cross-Weld Specimen by Optical Fiber Marking and Remote Monitoring

Jianming Gong, Shan-Tung Tu, Xiang Ling, 2002 .

Predicting thermal–hydraulic performances in compact heat exchangers by support vector regression

Hao Peng, Xiang Ling, Hao Peng, 2015 .