A. Korotitskiy

发表

In situ X-ray diffraction strain-controlled study of Ti–Nb–Zr and Ti–Nb–Ta shape memory alloys: crystal lattice and transformation features

V. Brailovski, S. Prokoshkin, K. Inaekyan, 2014 .

Structure formation during thermomechanical processing of Ti-Nb-(Zr, Ta) alloys and the manifestation of the shape-memory effect

M. Petrzhik, V. Brailovski, S. Prokoshkin, 2011 .

Effect of molybdenum on structural evolution and thermomechanical behavior of a heat-resistant nickel aluminide-based alloy

E. Levashov, A. Korotitskiy, Y. Kaplanskii, 2022, Journal of Alloys and Compounds.

Martensitic Transformations and Mechanical and Corrosion Properties of Fe-Mn-Si Alloys for Biodegradable Medical Implants

R. Drevet, S. Prokoshkin, Y. Zhukova, 2018, Metallurgical and Materials Transactions A.

Thermoelectric properties and cost optimization of spark plasma sintered n-type Si0.9Ge0.1 - Mg2Si nanocomposites

V. Khovaylo, M. Gorshenkov, D. Moskovskikh, 2018 .

Influence of aging and HIP treatment on the structure and properties of NiAl-based turbine blades manufactured by laser powder bed fusion

P. A. Loginov, E. Levashov, P. Loginov, 2020 .

Role of the structure and texture in the realization of the recovery strain resource of the nanostructured Ti-50.26 at %Ni alloy

V. Brailovski, S. Prokoshkin, A. Kreitcberg, 2014, The Physics of Metals and Metallography.

Nanostructured titanium alloys and multicomponent bioactive films: Mechanical behavior at indentation

M. Petrzhik, E. Levashov, R. Valiev, 2013 .

Crystal lattice of martensite and the reserve of recoverable strain of thermally and thermomechanically treated Ti-Ni shape-memory alloys

V. Brailovski, S. Prokoshkin, K. Inaekyan, 2011 .

Specific features of the formation of the microstructure of titanium nickelide upon thermomechanical treatment including cold plastic deformation to degrees from moderate to severe

V. Brailovski, S. Prokoshkin, K. Inaekyan, 2010 .

Low-temperature X-ray diffraction study of martensite lattice parameters in binary Ti–Ni alloys

V. Zel’dovich, S. Prokoshkin, A. Korotitskiy, 2008 .

Structure and properties of Ti-Ni-based alloys after equal-channel angular pressing and high-pressure torsion

V. Stolyarov, V. Brailovski, S. Dobatkin, 2008 .

In situ X-ray diffraction study of athermal and isothermal omega-phase crystal lattice in Ti-Nb-based shape memory alloys

V. Brailovski, S. Prokoshkin, S. Dubinskiy, 2016 .

Investigation of the structure stability and superelastic behavior of thermomechanically treated Ti-Nb-Zr and Ti-Nb-Ta shape-memory alloys

M. Petrzhik, V. Brailovski, S. Prokoshkin, 2015, The Physics of Metals and Metallography.

Formation of nanostructures in thermomechanically-treated Ti-Ni and Ti-Nb-(Zr, Ta) SMAs and their roles in martensite crystal lattice changes and mechanical behavior

M. Petrzhik, V. Brailovski, S. Prokoshkin, 2013 .

A Comparative Study of Structure Formation in Thermomechanically Treated Ti-Ni and Ti-Nb-(Zr, Ta) SMA

M. Petrzhik, V. Brailovski, S. Prokoshkin, 2012 .

Martensitic transformations and functional properties of thermally and thermomechanically treated Ti–Ni–Nb-based alloys

N. N. Popov, I. Khmelevskaya, S. Prokoshkin, 2006 .

Influence of heat treatment on the structure evolution and creep deformation behavior of a precipitation hardened B2-(Ni, Fe)Al alloy

E. Levashov, P. Loginov, M. Bychkova, 2020 .

Bulk Nb3Al intermetallic compound: Synthesis and high-temperature properties

D. Moskovskikh, D. Moskovskikh, T. Sviridova, 2020 .

Microstructure and mechanical properties of the (Fe,Ni)Al-based alloy produced by SLM and HIP of spherical composite powder

E. Levashov, P. Loginov, P. Petrovskii, 2019, Materials Science and Engineering: A.

Advanced Heat-Resistant TiAl (Nb,Cr,Zr)-Based Intermetallics with the Stabilized β(Ti)-Phase

M. Gorshenkov, A. Korotitskiy, A. Kartavykh, 2018 .

Structural and mechanical properties of Ti–Al–Nb–Mo–B alloy produced from the SHS powder subjected to high-energy ball milling

P. Loginov, E. Levashov, A. Korotitskiy, 2021 .

Nanostructured titanium-based materials for medical implants: Modeling and development

Alexey Yu. Smolin, Leon Mishnaevsky, Andrey V. Solov’yov, 2014 .

Microstructure and thermomechanical behavior of Heusler phase Ni2AlHf-strengthened NiAl-Cr(Co) alloy produced by HIP of plasma-spheroidized powder

E. Levashov, P. Loginov, I. Logachev, 2018, Materials Science and Engineering: A.

Characterization of amorphous and nanocrystalline Ti–Ni-based shape memory alloys

V. Brailovski, S. Prokoshkin, K. Inaekyan, 2009 .

Compressive creep of coarse-grain WC–Co and WC–TaC–Co hardmetals with uniform microstructure comprising rounded WC grains

E. Levashov, A. Korotitskiy, A. Zaitsev, 2020 .

Nanostructure features and stress-induced transformation mechanisms in extremely fine-grained titanium nickelide

I. Shchetinin, V. Brailovski, S. Prokoshkin, 2019, Journal of Alloys and Compounds.

The mechanisms of stress-induced transformation in ultimately fine-grained titanium nickelide, and critical grain size for this transformation

V. Brailovski, S. Prokoshkin, N. Tabachkova, 2020 .

Hot radial shear rolling and rotary forging of metastable beta Ti-18Zr-14Nb (at. %) alloy for bone implants: Microstructure, texture and functional properties

V. Cheverikin, V. Brailovski, S. Prokoshkin, 2019, Journal of Alloys and Compounds.

Concentration, temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys

S. Turenne, V. Brailovski, I. Khmelevskaya, 2003 .

Structure and Properties of Ti–50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments

A. Popovich, E. Borisov, V. Brailovski, 2022, Shape Memory and Superelasticity.

Thermoelectric Properties of n-Type Si0,8Ge0,2-FeSi2 Multiphase Nanostructures

V. Khovaylo, M. Gorshenkov, D. Moskovskikh, 2016, Journal of Electronic Materials.

Room-temperature tensile properties of float-zone processed β-stabilized γ-TiAl(Nb,Cr,Zr) intermetallic

E. A. Asnis, N. Piskun, I. I. Statkevich, 2017 .

A promising microstructure/deformability adjustment of β-stabilized γ-TiAl intermetallics

E. A. Asnis, N. Piskun, I. I. Statkevich, 2016 .

Manufacturing and Characterization of Novel Ti-Zr-Based Shape Memory Alloys

V. Brailovski, S. Prokoshkin, S. Dubinskiy, 2017 .

On the lattice parameters of phases in binary Ti-Ni shape memory alloys

S. Turenne, V. Brailovski, I. Khmelevskaya, 2004 .

Control of phase transformations and microstructure for optimum realization of one-way and two-way shape memory effects in removable surgical clips

I. Khmelevskaya, S. Prokoshkin, A. Korotitskiy, 2017 .

Thermomechanical Treatment of TiNi Intermetallic-Based Shape Memory Alloys

V. Brailovski, S. Prokoshkin, K. Inaekyan, 2015 .

Application of Thermomechanically Treated Ti-Ni SMA

I. Khmelevskaya, A. Korotitskiy, E. Ryklina, 2015 .

Nanostructures and stress-induced phase transformation mechanism in titanium nickelide annealed after moderate cold deformation

V. Brailovski, S. Prokoshkin, E. Blinova, 2017 .

Development of Temperature-Rate Modes of Hot Deformation of the Co–28Cr–6Mo Alloy Based on Processing Maps

Yu. V. Gamin, A. Korotitskiy, S. Galkin, 2022, Steel in Translation.

Study of Low-Temperature Thermomechanical Behavior of the Ti–18Zr–15Nb Superelastic Alloy under Different Temperature-Rate Conditions

A. Korotitskiy, M. Derkach, V. Sheremetyev, 2023, Physics of Metals and Metallography.

X‐Ray Diffraction Studies of Thermally and Thermomechanically Treated Binary Ti‐Ni Alloys

V. Brailovski, S. Prokoshkin, K. Inaekyan, 2013 .