Shan-Lin Zhang

发表

Advanced oxygen-electrode-supported solid oxide electrochemical cells with Sr(Ti,Fe)O3−δ-based fuel electrodes for electricity generation and hydrogen production

Chang-jiu Li, S. Barnett, Hongqian Wang, 2020, Journal of Materials Chemistry A.

Influence of pre-reduction on microstructure homogeneity and electrical properties of APS Mn1.5Co1.5O4 coatings for SOFC interconnects

Chang-jiu Li, Cheng-Xin Li, C. Li, 2017 .

Thermally Sprayed Large Tubular Solid Oxide Fuel Cells and Its Stack: Geometry Optimization, Preparation, and Performance

Chang-jiu Li, B. Song, Shuai Liu, 2017, Journal of Thermal Spray Technology.

Relationship Between Designed Three-Dimensional YSZ Electrolyte Surface Area and Performance of Solution-Precursor Plasma-Sprayed La0.8Sr0.2MnO3−δ Cathodes

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2016, Journal of Thermal Spray Technology.

Thermally sprayed high-performance porous metal-supported solid oxide fuel cells with nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes

Chang-jiu Li, Samson Y. Lai, Haibin Sun, 2016 .

Liquid plasma sprayed nano-network La 0.4 Sr 0.6 Co 0.2 Fe 0.8 O 3 /Ce 0.8 Gd 0.2 O 2 composite as a high-performance cathode for intermediate-temperature solid oxide fuel cells

Kevin Huang, Chang-jiu Li, Guanjun Yang, 2016 .

Investigation into the diffusion and oxidation behavior of the interface between a plasma-sprayed anode and a porous steel support for solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2016 .

Atmospheric plasma-sprayed BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ (BZCYYb) electrolyte membranes for intermediate-temperature solid oxide fuel cells

Meilin Liu, Chang-jiu Li, Yujun Zhang, 2016 .

Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2015 .

La0.8Sr0.2Ga0.8Mg0.2O3 electrolytes prepared by vacuum cold spray under heated gas for improved performance of SOFCs

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018, Ceramics International.

Characteristics of Oxygen Electrode Supported Reversible Solid Oxide Cells

S. Barnett, Hongqian Wang, Matthew Y. Lu, 2021 .

A novel structure of YSZ coatings by atmospheric laminar plasma spraying technology

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2018, Scripta Materialia.

Microstructure and Ablation Behavior of Low-Pressure Plasma Sprayed ZrB2 Coatings Down to 100 Pa

Xiao-Tao Luo, Chang-jiu Li, Di Wang, 2021, Journal of Thermal Spray Technology.

Vacuum cold sprayed nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ as a high-performance cathode for porous metal-supported solid oxide fuel cells operating below 600 °C

Chang-jiu Li, Cheng-Xin Li, Y. Shang, 2021 .

Synergic Effect of Fe-Doping and Ni3s2/Mns Heterointerface to Boost Efficient Oxygen Evolution Reaction

Chang Li, Weihua Hu, Ming Zhao, 2022, SSRN Electronic Journal.

Effect of the shell-core-structured particle design on the heating characteristic of nickel-based alloy particle during plasma spraying

Chang-jiu Li, Shu-Wei Yao, Jia-Jia Tian, 2018 .

Numerical simulation of the flow characteristics inside a novel plasma spray torch

A. Murphy, Guanjun Yang, J. Trelles, 2019, Journal of Physics D: Applied Physics.

Suspension Plasma Sprayed Sr2Fe1.4Mo0.6O6−δ Electrodes for Solid Oxide Fuel Cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2017, Journal of Thermal Spray Technology.

Microstructure and Properties of Porous Ni50Cr50-Al2O3 Cermet Support for Solid Oxide Fuel Cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2012, Journal of Thermal Spray Technology.

A-site deficient Sr0.9Ti0.3Fe0.7O3−δ perovskite：a high stable cobalt-free oxygen electrode material for solid oxide electrochemical cells with excellent electrocatalytic activity and CO2 tolerance

Cheng-Xin Li, Shan-Lin Zhang, Fangchun Han, 2022, Journal of the European Ceramic Society.

Effect of Fe doping on the performance of suspension plasma-sprayed PrBa0.5Sr0.5Co2−xFexO5+δ cathodes for intermediate-temperature solid oxide fuel cells

Chang-jiu Li, Cheng-Xin Li, C. Li, 2017 .

Dominant effect of particle size on the CeO2 preferential evaporation during plasma spraying of La2Ce2O7

Guanjun Yang, Cheng-Xin Li, Li-Shuang Wang, 2017 .

High Heat Insulating Thermal Barrier Coating Designed with Large Two-Dimensional Inter-lamellar Pores

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2015, Journal of Thermal Spray Technology.

Optimization of Plasma-Sprayed Lanthanum Chromite Interconnector Through Powder Design and Critical Process Parameters Control

Chang-jiu Li, Cheng-Xin Li, C. Li, 2019, Journal of Thermal Spray Technology.

Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2019, Journal of Thermal Spray Technology.

Plasma-Sprayed Y2O3-Stabilized ZrO2 Electrolyte With Improved Interlamellar Bonding for Direct Application to Solid Oxide Fuel Cells

Cheng-Xin Li, C. Li, Shan-Lin Zhang, 2014 .

Scandia-stabilized zirconia electrolyte with improved interlamellar bonding by high-velocity plasma spraying for high performance solid oxide fuel cells

Chang-jiu Li, Guanjun Yang, Cheng-Xin Li, 2013 .

Microstructural evolution of alumina coatings by a novel long laminar plasma spraying method

Cheng-Xin Li, Yue-peng Wang, C. Li, 2019, Surface and Coatings Technology.

Generation of Long Laminar Plasma Jets: Experimental and Numerical Analyses

A. Murphy, Chang-jiu Li, J. Trelles, 2019, Plasma Chemistry and Plasma Processing.

Effect of Powder Particle Size and Spray Parameters on the Ni/Al Reaction During Plasma Spraying of Ni-Al Composite Powders

Xiao-Tao Luo, Chang-jiu Li, Xian-jin Liao, 2021, Journal of Thermal Spray Technology.

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

M. Yasir, Cheng-Xin Li, Yue-peng Wang, 2020 .

Splash involved deposition behavior and erosion mechanism of long laminar plasma sprayed NiCrBSi coatings

Guanjun Yang, Cheng-Xin Li, C. Li, 2020 .

Application of high velocity oxygen fuel flame (HVOF) spraying to fabrication of La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte for solid oxide fuel cells

Guanjun Yang, Cheng-Xin Li, C. Li, 2016 .

Enhanced sintering behavior of LSGM electrolyte and its performance for solid oxide fuel cells deposited by vacuum cold spray

Guanjun Yang, Cheng-Xin Li, Li-Shuang Wang, 2017 .

Chemical compatibility and properties of suspension plasma-sprayed SrTiO3-based anodes for intermediate-temperature solid oxide fuel cells

Cheng-Xin Li, C. Li, Shan-Lin Zhang, 2014 .

Stable high current density operation of La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrodes

S. Barnett, Hongqian Wang, Justin G. Railsback, 2019, Journal of Materials Chemistry A.

Effects of Processing Parameters on the Density and Mechanical Properties of Compacts Prepared by Magnetic Pulse Compaction of Hydrogenated Ti6Al4V Powder

Haiping Yu, Chun-feng Li, Shan-Lin Zhang, 2012 .

Comparative study on the electrochemical performance of Sr(Ti0.3Fe0.7)O3-δ fuel electrode in different fuel gases for solid oxide electrochemical cells

Cheng-Xin Li, Shan-Lin Zhang, Fangchun Han, 2022, Ceramics International.

Sodium ionic conductivity and stability of amorphous Na 2 O·2SiO 2 added with M x O y (M = Zr, Y, and Sm)

Cheng-Xin Li, C. Li, Shan-Lin Zhang, 2018 .

Structured La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with large-scale vertical cracks by atmospheric laminar plasma spraying for IT-SOFCs

Guanjun Yang, Cheng-Xin Li, Yue-peng Wang, 2020 .

Dominant Factors Influencing the Electrochemical Performance of Plasma-Sprayed LSGM Electrolyte

Chang-jiu Li, Cheng-Xin Li, Shan-Lin Zhang, 2015 .

Electrochemical performance and stability of SrTi0.3Fe0.6Co0.1O3-δ infiltrated La0.8Sr0.2MnO3Zr0.92Y0.16O2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells

S. Barnett, Hongqian Wang, Cheng-Xin Li, 2019, Journal of Power Sources.

Cobalt-substituted SrTi0.3Fe0.7O3−δ: a stable high-performance oxygen electrode material for intermediate-temperature solid oxide electrochemical cells

S. Barnett, Hongqian Wang, L. Mogni, 2018 .

High stability SrTi1−xFexO3−δ electrodes for oxygen reduction and oxygen evolution reactions

S. Barnett, B. Park, Cheng-Xin Li, 2019, Journal of Materials Chemistry A.

Controlling grain size in columnar YSZ coating formation by droplet filtering assisted PS-PVD processing

Xiao-Tao Luo, Haibin Sun, Guanjun Yang, 2015 .

A Novel Strategy for Depositing Dense Self-fluxing Alloy Coatings with Sufficiently Bonded Splats by One-Step Atmospheric Plasma Spraying

Xiao-Tao Luo, Chang-jiu Li, Shan-Lin Zhang, 2019, Journal of Thermal Spray Technology.

Sintering behavior and electrochemical performance of A-site deficient SrxTi0.3Fe0·7O3-δ oxygen electrodes for solid oxide electrochemical cells

Cheng-Xin Li, Shan-Lin Zhang, M. Hanif, 2021 .

Plasma-Sprayed High-Performance (Bi2O3)0.75(Y2O3)0.25 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Rui Chen, Cheng-Xin Li, C. Li, 2021, Journal of Thermal Spray Technology.

The Microstructure Stability of Atmospheric Plasma-Sprayed MnCo2O4 Coating Under Dual-Atmosphere (H2/Air) Exposure

Xiao-Tao Luo, Guanjun Yang, Cheng-Xin Li, 2015, Journal of Thermal Spray Technology.

Breakthrough in atmospheric plasma spraying of high-density composite electrolytes: Deposition behavior and performance of plasma-sprayed GDC-LSGM on porous metal-supported solid oxide fuel cells

Shan-Lin Zhang, Zaheer Ud Din Babar, Jiutao Gao, 2024, International Journal of Hydrogen Energy.

Effects of Powder Structure and Size on Gd2O3 Preferential Vaporization During Plasma Spraying of Gd2Zr2O7

Guanjun Yang, Cheng-Xin Li, C. Li, 2019, Journal of Thermal Spray Technology.