D. Gruber

发表

Statistical study of compressive creep parameters of an alumina spinel refractory

H. Harmuth, Shengli Jin, S. Samadi, 2020 .

Experimental Investigation of the Tension and Compression Creep Behavior of Alumina-Spinel Refractories at High Temperatures

J. Gillibert, E. Blond, L. Teixeira, 2020, Ceramics.

Creep testing of carbon containing refractories under reducing conditions

H. Harmuth, Shengli Jin, D. Gruber, 2019, Ceramics International.

Three stage creep behavior of MgO containing ordinary refractories in tension and compression

H. Harmuth, Shengli Jin, D. Gruber, 2019, Ceramics International.

Compressive creep testing of refractories at elevated loads—Device, material law and evaluation techniques

H. Harmuth, Shengli Jin, D. Gruber, 2014 .

A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

H. Harmuth, Shengli Jin, D. Gruber, 2019, Journal of the European Ceramic Society.

Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back‐Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

H. Harmuth, Shengli Jin, D. Gruber, 2019, steel research international.

Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

H. Harmuth, Shengli Jin, D. Gruber, 2022, 2022 International Joint Conference on Neural Networks (IJCNN).

Simulation of micro-crack formation in a magnesia spinel refractory during the production process

H. Harmuth, C. Fasching, D. Gruber, 2015 .

Durability of Brick Lined Steel Ladles from a Mechanical Point of View

H. Harmuth, D. Gruber, 2008 .

Determination of Young’s modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

H. Harmuth, Shengli Jin, D. Gruber, 2014 .

Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

T. Chotard, M. Huger, H. Harmuth, 2013 .

Fracture mechanical characterisation of refractories and application for assessment and simulation of the thermal shock behaviour

T. Auer, H. Harmuth, C. Manhart, 2007 .

Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

H. Harmuth, Sacha Emam, Shengli Jin, 2022, Ceramics International.

Thermal shock resistance of magnesia spinel refractories—Investigation with the concept of configurational forces

O. Kolednik, C. Fasching, D. Gruber, 2016 .

Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia–spinel refractories

T. Chotard, M. Huger, H. Harmuth, 2012 .

Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

Dietmar Gruber, Harald Harmuth, Yajie Dai, 2017 .

Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

Yajie Dai, H. Harmuth, D. Gruber, 2017 .

Specific fracture energy and de-agglomeration rate of silicate-bonded foundry sand cores

Peter Schumacher, Dietmar Gruber, Bernhard J. Stauder, 2018, Prod. Eng..

Optimisation of 3D RVE for anisotropy index reduction in modelling thermoelastic properties of two-phase composites using a periodic homogenisation method

N. Schmitt, N. Tessier-Doyen, T. Chotard, 2011 .

Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

Dietmar Gruber, Harald Harmuth, Shengli Jin, 2016 .

Multi‐Response Optimization of the Thermal and Thermomechanical Behavior of a Steel Ladle Lining using Grey Relational Analysis and Technique for Order Preference by Similarity to Ideal Solution

D. Gruber, Aidong Hou, S. Jin, 2023 .

Thermomechanical modelling of a torpedo car by considering working lining spalling

A. Buhr, S. Sinnema, H. Harmuth, 2018, Ironmaking & Steelmaking.

A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

H. Harmuth, D. Gruber, Aidong Hou, 2018, JOM.

Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts

H. Harmuth, D. Gruber, J. Fruhstorfer, 2022, Interceram - International Ceramic Review.

Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

H. Harmuth, D. Gruber, Stefan Schachner, 2022, Ceramics International.

FEM simulation of the thermomechanical behaviour of the refractory lining of a blast furnace

Dietmar Gruber, Harald Harmuth, K. Andreev, 2004 .

Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

Yajie Dai, H. Harmuth, D. Gruber, 2017 .

Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

H. Harmuth, R. Rössler, D. Gruber, 2016 .

A comparison of two damage models for inverse identification of mode Ⅰ fracture parameters: Case study of a refractory ceramic

H. Harmuth, S. Samadi, D. Gruber, 2021, International Journal of Mechanical Sciences.

R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

Ya-wei Li, Yajie Dai, H. Harmuth, 2020 .

Specific fracture energy and de-agglomeration rate of silicate-bonded foundry sand cores

P. Schumacher, D. Gruber, B. Stauder, 2018, Production Engineering.

Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining

H. Harmuth, D. Gruber, Stefan Schachner, 2023, Open Ceramics.